Fife · Scotland
Fire-rated sealant in Fordell Firs, Fife
Fire-stopping gaps in Fordell Firs need attention? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.
- Old fire sealant that has split or come away
- Joints picked up in a fire-stopping survey
- Open joints along the top of partitions
Your questions about fire rated sealant in Fordell Firs
Will you come out to Fordell Firs?
Yes, Fordell Firs is covered. Our work covers the whole of Scotland, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
How do Scotland’s building regulations apply to fire-rated sealant in Fordell Firs?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that is how we fit it. We don’t certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
Can you seal over the old sealant?
No, because it fails. The old sealant always comes out first.
Is it worth trying it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
Is the work guaranteed?
Yes. All our work carries a 12-month guarantee.
What information do you need?
Where the job is, what the problem is and roughly how big it is. If you can, email a few photos.
Can you tell me how many minutes the seal will last?
We don’t give ratings or certificates for our work. The requirement comes from your assessor, designer or building control, and we fit a product whose tested details meet it, recording the locations and products.
Can I add another job to the visit?
Yes. Several rooms, windows or areas can go on one quote.
Fire rated sealant in Fordell Firs, done properly
Door frame gaps, linear joints and holes around services all have their own details. Measuring the gap and checking what it’s made of comes first, then the sealant goes in to the depth the product’s details set. We work on service penetrations, door frames and plasterboard & masonry, and the jobs we see most are holes left by a change of layout and old fire sealant that has split or come away.
If you look after holiday lets, a guest house or a community building in or near Fordell Firs, the washrooms and kitchens need the same care as any city building, and fire-rated joints should be kept in good order.
There’s a 12-month guarantee on every job.
- Location
- Fordell Firs (KY11)
- Region
- Fife
- Guarantee
- One year on every job
- Price
- A clear price before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Towns and villages near Fordell Firs
What else we do in Fordell Firs
Do you need fire rated sealant in Fordell Firs?
A lot of fire stopping is out of sight: above ceilings, inside risers and behind panels. Because nobody sees it, gaps go unnoticed until an assessor or surveyor looks.
If you can see any of these, it’s time to have the joints looked at:
- Fire seals that have cracked with movement
- Seals cut through by electricians, plumbers or data installers
- Door frames with gaps between frame and wall
- Gaps flagged on a fire risk assessment
For landlords with property near Dalgety Bay station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Before booking anyone
- Whether the sealant suits the joint
- Whether you can choose the colour
- How long to leave it before use
- How the surfaces are prepared before sealing
Aftercare tips
How long the joints last depends on use and care. Here’s what we suggest:
- Check risers, ceiling voids and cupboards during building checks
- Flag any open gap you spot round a pipe or cable
- Allow for resealing whenever new services are run
- Do not paint over fire sealant until it has cured
Avoid covering a sealed gap with anything that is not part of the tested detail. If it needs repair, use the same type of product. We can tell you which product we used.
An open gap isn’t only a fire issue: they also let noise, draughts and sometimes pests through. Sealing them early helps on every front.
What the job involves on each surface
Door frames
Our work is the joint between frame and wall. Doors, seals and closers are for a door specialist.
Masonry and concrete
Holes through concrete and block are rarely neat. We measure the gap at its widest point to make sure it suits the product.
Can I do it myself?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly, so just mention it when you contact us.
What fire rated sealant looks like in Fordell Firs
For seaside hotels, guest houses and holiday lets around Fordell Firs, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. There are hotels and other places to stay in and around Fordell Firs. Hotel work can be planned room by room, with out-of-hours working where needed.
If you look after a building such as Inverkeithing High School, gaps opened by contractors for new cabling are a common finding in schools and offices.
Fordell Firs is about 2 miles south-east of Dunfermline, in Fife. Every kind of property in Fordell Firs can book us for fire rated sealant, old or new, large or small. The work is guaranteed for a year. Across Fife, we cover 133 places, and Fordell Firs is one of them. Edinburgh is on our list too, about 10 miles from Fordell Firs.
We cover every part of KY11 for fire rated sealant and the streets around it. Close by, we work in Hillend (1 mile south), Dalgety Bay (2 miles south-east), Inverkeithing (2 miles south-west), Crossgates (2 miles north) and Jamestown (2 miles south). We also work in nearby towns such as Kirkcaldy (10 miles north-east), Glenrothes (13 miles north-east), Cowdenbeath (4 miles north), Dysart (11 miles north-east), Lochgelly (6 miles north-east) and Burntisland (6 miles east).
What’s near Fordell Firs
Around Fordell Firs, our work takes us to homes and buildings near Hillend Tavern, among other places. The closest station to Fordell Firs is Dalgety Bay station, about 0.9 miles south-east. Nearby you’ll also find Kingsgate Centre (3.3 miles north-west) and Fordell Castle (within half a mile east). The countryside around Fordell Firs includes Loch Fitty.
What happens if it’s left?
Sealant is not the fix for every opening. Big openings, bundles of cables and plastic pipes may need batts, collars or wraps instead. We will say so if a gap needs something other than sealant. In a place like Fordell Firs, small leaks are easy to put off, but water behind a failed seal does the most damage when nobody’s watching.
What you pay reflects the work, not guesswork. That is why we ask a few questions first and agree the price before starting.
Why us?
- 4.9 on Google from 180+ five-star reviews
- Anti-fungal sanitary silicone in wet areas
- Experience in homes, commercial sites and hotels
- Quality sealants from Arbo and Everbuild
See what affects the cost or our reviews.
Landlord and commercial work in Fordell Firs
In hotels, rooms out of use cost money, so the work can be planned room by room. We’ve worked in hotels as well as homes and businesses.
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.
How it works
On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The work itself takes from a few hours to a few days, depending on the number of gaps and the access from start to finish. Outdoor work around Fordell Firs depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Work indoors is not affected.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out and the faces cleaned.
- We fit backing where needed and apply the fire-rated sealant to depth.
- We hand over a list of locations and products.
Getting ready for the visit
- Tell us about any water getting in
- Let us know about parking restrictions
- Let us know about stairs, lifts or work at height
How to get a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. Whenever you’re ready, drop us a line at info@mrmastic.co.uk.