Fife · Scotland

Fire-rated sealant in Hillend, Fife

Intumescent and fire-rated sealant around gaps, frames and service penetrations for Hillend, backed by a one-year guarantee. Call for a quick quote.

  • Open joints along the top of partitions
  • Fire seals that have cracked with movement
  • Standard silicone or caulk in a fire-stopping gap

Trusted fire rated sealant in Hillend

Fire rated sealant in Hillend, done properly

Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. Each gap is sealed to the product maker’s tested detail for its size and substrate, and we can record what went where. We’re often asked to deal with open holes round services passing through fire walls and open gaps behind door architraves, on door frames, flats & HMOs and service penetrations.

For holiday lets, guest houses and community buildings in or near Hillend, the washrooms and kitchens need the same care as any city building, and fire-rated joints should be kept in good order.

You are covered for a year from the day we finish. If there’s a problem with it, please email us at info@mrmastic.co.uk.

Location
Hillend (KY11)
Region
Fife
Guarantee
12 months on all our work
Quote
Quoted before any work starts
Email
info@mrmastic.co.uk
Last updated
26 October 2026
Eleven members of the Mr Mastic team standing in front of branded white vans

Landlord and commercial work in Hillend

Letting agents and landlords in Hillend can book us as well as householders. Resealing between tenancies is a simple way to keep a property in good order.

Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.

Leave it or put it right?

Squirting in whichever sealant is nearest doesn’t make a fire seal. A fire-rated product only performs as tested when it’s installed to its tested detail, so both the product and the method matter. Exposed walls in smaller Scottish places take a lot of wind and rain, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.

There are no prices on our website, because each job is priced on what it involves. Call for a quick quote.

Why us?

  • An ARBOMaster approved applicator
  • Every job guaranteed for a year
  • Anti-fungal silicone where joints get wet
  • Domestic, commercial and hotel work

See our cost guide or what customers say.

Looking after it afterwards

After the cure time, these simple habits help:

  • Look in service cupboards and ceiling voids from time to time
  • Ask every contractor to reseal any fire stopping they disturb
  • Store the list of sealed gaps with your building paperwork
  • Never patch a fire seal with standard sealant

Avoid covering a sealed gap with anything that is not part of the tested detail. Repairs should use a matching fire-rated product. We can tell you which product we used.

Any job that breaks through a wall or ceiling should include resealing. Catching it then saves a separate visit later.

Quotes for fire rated sealant in Hillend

Jobs vary more than people expect. The main factors:

  • The old material and how stubborn it is
  • Mould in or behind the old joints
  • The number and length of the joints
  • How many areas need sealing

What it costs depends on the amount of work, how much old material has to come out and access to the work. We give a clear quote before we start.

Helping us quote

There’s no need for technical detail. It helps if you can tell us:

  • Roughly how big the job is
  • Photos by email, if that is easy
  • If it’s domestic, commercial or a hotel
  • Where the property is

Need a quote? Please email us at info@mrmastic.co.uk with a few details. We’ll explain what we’d do and give you a clear quote before we start.

Fire rated sealant in Hillend: local notes

For seaside hotels, guest houses and holiday lets around Hillend, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Hillend has hotels and guest accommodation in and around it. For hotels, a room-by-room programme keeps most rooms in use while the work goes on.

If you let a flat or house near Dalgety Bay station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. For buildings such as St John's Church, service openings in its walls need the right fire-rated sealant, as in any building. Managing a site like Inverkeithing High School? Then service openings in fire-resisting walls need checking after any refurbishment.

Hillend is about 3 miles south-east of Dunfermline, in Fife. For fire rated sealant in and around Hillend, it’s easy to get a quote: please send an email to info@mrmastic.co.uk. We are based in Crawley and cover Fife. Across Fife, we cover 133 places, Hillend among them. Edinburgh is on our list too, about 9 miles from Hillend.

Jobs for fire rated sealant in KY11 is quoted and booked the same way as anywhere else. Whether your property is on Main Street, Main Street West and School Lane or anywhere close by, our applicators can take on the job. If you are just outside Hillend, we cover Dalgety Bay (1 mile south-east), Fordell Firs (1 mile north), Inverkeithing (1 mile south-west), Jamestown (2 miles south) and North Queensferry (2 miles south). Larger places within reach include Dunfermline (3 miles north-west), Kirkcaldy (10 miles north-east), Glenrothes (13 miles north-east), Cowdenbeath (5 miles north), Dysart (11 miles north-east) and Abbeyview (3 miles north-west).

What’s near Hillend

We work in homes and buildings around Hillend Tavern and the streets around them. There’s a railway station in Hillend itself: Dalgety Bay station. A little further out are Queensferry Museum (3.6 miles south) and Kingsgate Centre (4 miles north-west). Open spaces near Hillend include Loch Fitty.

Map of Hillend © OpenStreetMap contributors

What sealant work can’t fix

In fairness, some problems need a different trade:

  • Assessing a building’s fire safety
  • Sign-off of the building, which sits with building control or your assessor
  • Problems with the door itself rather than the gap around the frame

If in doubt, drop us a line at info@mrmastic.co.uk and we will say what we think before you book.

Joints and surfaces we work on

  • Plasterboard & masonry
  • Linear gaps
  • Service penetrations
  • Pipe & cable gaps
  • Flats & HMOs
  • Door frames

Common questions in Hillend

I let a flat near Dalgety Bay station. Can you help?

Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just email us at info@mrmastic.co.uk with the address and what needs doing, and we’ll give you a clear quote.

Do you work in hotels near Hillend?

Yes, hotels and guest houses are among the places we work. A room-by-room programme keeps most rooms in use while the work goes on.

Do I have to be there?

Access is agreed with you when the job is booked. For inside work, that normally means someone being in.

Do you offer different sealant colours?

Yes. Sealants come in white, clear, grey and other colours, and we’ll agree it with you first.

What fire rating will the seal have?

Ratings and certificates are not something we issue. The performance comes from the product’s tested details and the specification from your assessor or designer, and we install to them.

How long does fire rated sealant take?

A typical job takes a few hours for a handful of gaps, and longer for a whole building, including the preparation. We’ll confirm how long when we quote.

Where do you work from?

We’re a Crawley-based firm. Our area covers South East England, London and Scotland.

Is it messy?

No. We protect the surfaces around the joints, and we tidy up before we go.

How the visit works

On the day, there’s very little for you to do. Show us the job and we’ll take it from there. The work itself takes anything from a few hours to several days, depending on how many gaps there are from start to finish. Outdoor work around Hillend depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Work indoors is not affected.

  1. We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
  2. Each gap is measured and its substrate and service noted.
  3. Any non-fire-rated filler is removed.
  4. We fit backing where needed and apply the fire-rated sealant to depth.
  5. We hand over a list of locations and products for your records.

How to prepare

  • Mention any sign-in or site rules at work premises
  • Move anything stored near the joints
  • Tell us if parking is tricky

Getting a quote

We don’t publish a price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, send an email to info@mrmastic.co.uk.

Get a price

Read more

Should I try it myself first?

A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.

If you’ve already had a go yourself, that is fine. We cut it out and start again, so just mention it when you contact us.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job