Aberdeenshire · Scotland
Remedial sealant & repairs in Fettercairn, Aberdeenshire
Failed sealant joints in Fettercairn need attention? We remove the old material, prepare the joints and seal them properly.
- Black mould underneath the bead
- Worktop sealant that has shrunk and split
- Repeat leaks from the same joint
Remedial sealant in Fettercairn, done properly
Removing failed sealant is the hardest part of the job. We cut out every layer, clear the residue and degrease the surfaces, without scratching tiles, trays or frames. New sealant only bonds to a clean, dry joint. We work on botched or over-sealed joints, shrunken worktop sealant and mouldy bath & shower sealant, and common reasons people get in touch are kitchen joints letting water behind the worktop and sealant peeling off a dusty or damp surface.
For a place like Fettercairn, the job is the same as anywhere: everything old is cut out, the joints are cleaned and dried, and new sealant or grout goes in. We just plan the journey and access beforehand.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Fettercairn (AB30)
- Region
- Aberdeenshire
- Cover
- 12 months on all our work
- Price
- A clear price before we start
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
How the job changes by surface
Movement & expansion joints
A movement joint must be able to stretch. Failed sealant is cut out, backing rod or tape is fitted and the joint resealed.
Leaking trays & enclosures
Repeat shower leaks often come from a tray that flexes or an enclosure sealed in the wrong place. Both are checked before any new sealant goes on.
Landlords, agents and businesses in Fettercairn
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
Aftercare tips
After the cure time, these simple habits help:
- Have loose fittings fixed before resealing
- Run the fan after every shower
- Keep movement joints clear of mortar and paint
- Deal with small splits early
Ventilation keeps mould away from the new bead: run the fan during and after showers, or open a window.
Warning signs: sealant lifting at the ends, a second bead visible on top of the first, black mould under the silicone, or stains below a bathroom. Each one is worth getting looked at.
How we quote for remedial sealant
The quote reflects the job in front of us. We look at:
- How many areas need sealing
- Whether old sealant or filler has to be cut out
- How much there is to do
- The product the joint needs
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Ask us for a quote and we’ll explain what it covers.
Helping us quote
When you contact us, it’s useful to know:
- Whether it’s a home or a business
- Where the job is, and your postcode
- Any previous sealing or DIY work
- The problem you’ve noticed
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is.
Places near Fettercairn
Other services in Fettercairn
DIY sealant or a professional job?
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
What we’re called out for in Fettercairn
How a joint is built matters as much as the product. Sealant packed too deep, or stuck to the back of the joint as well as the sides, can’t stretch, so it tears when the joint moves. Backing rod or bond-breaker tape prevents it.
Keep an eye out for these signs:
- Movement joints that have split or pulled away
- Mould trapped under a layer of silicone
- Wide, uneven beads that look worse than the old ones
- Decorators’ caulk around a bath or shower
In the older streets around Fettercairn Parish Church, walls and floors in older homes can move, and sealant and grout show it first.
Comparing quotes
- Whether they seal over old material or remove it
- Which colour the sealant will be
- How long the guarantee is
- What happens if they find a problem under the old sealant
Fettercairn questions
Can you do remedial sealant in Fettercairn?
Yes, Fettercairn is within the area we cover. We work across all of Scotland. You can email us at info@mrmastic.co.uk and let us know what needs doing.
Do you cover smaller places like Fettercairn?
Yes, we do. Our work covers the whole of Scotland, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
My shower still leaks after a reseal. Can you sort it?
Yes, normally. First we check whether the leak is the sealant at all, then the joints are stripped and resealed.
Can you work on commercial sites?
Yes. We have worked for hotels, offices and other businesses.
Can you strip sealant from an acrylic tray safely?
Yes. Residue is removed with a product suited to the surface rather than scraped hard, so the new sealant bonds cleanly.
Do I have to be there?
We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.
How long should I leave it?
That depends on the sealant used, so follow the cure time we give you.
What sealant do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We will tell you what we are using and why.
What remedial sealant looks like in Fettercairn
Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that doesn’t dry out.
For landlords with property near Laurencekirk station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Fettercairn is about 10 miles north-west of Montrose, in Aberdeenshire. Every kind of property in Fettercairn can book us for remedial sealant. The work is guaranteed for a year. We cover 161 towns and villages across Aberdeenshire, large and small. Aberdeen is on our list too, around 27 miles away.
Work in AB30 works the same way as everywhere else we cover. Whether your property is on The Square, Main Street and School Road or a nearby road, our applicators can take on the job. Other places close to Fettercairn include Sauchieburn (3 miles south-east), Edzell Woods (3 miles south-west), Luthermuir (3 miles south), Laurencekirk (4 miles east) and Edzell (4 miles south-west). Larger places within reach include Montrose (10 miles south-east), Stonehaven (15 miles north-east), Banchory (15 miles north), Inverbervie (11 miles east), St Cyrus (8 miles south-east) and Hillside (8 miles south-east).
Near you in Fettercairn
Fettercairn’s nearest station is Laurencekirk station, roughly 4.3 miles east. Well-known places in the area include Thornton Castle (2.5 miles south-east) and Stracathro Hospital (5.4 miles south). Not far away are Hound Hillock.
The process
All our tools and materials come with us in the van, so you don’t need to buy or prepare anything. Once we have agreed what’s being done, we protect the area and start. It normally takes a few hours for a typical bath or shower, longer where several layers have been applied. Around Fettercairn, distance and access matter more than parking. Tell us how to find the property and how to reach the work.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Old beads and residue are removed down to clean surfaces.
- Mould is treated and the joint dried.
- We reseal with a product suited to the joint, backed where needed.
- We finish neatly and point out anything that needs another trade.
Getting ready for the visit
- Where the joints are inside, avoid wetting them before we arrive
- Clear the area around the work
- Keep children and pets away from the work area
How to get a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we’ll explain how we’d tackle it. Whenever you’re ready, drop us a line at info@mrmastic.co.uk.