Kent · England
Remedial sealant & repairs in Crouch, Kent
Professional remedial sealant in and around Crouch, with every bit of old sealant taken out first and a 12-month guarantee.
- Worktop sealant that has shrunk and split
- A shower that leaks however often it’s resealed
- Beads that never stuck properly
How we handle remedial sealant in Crouch
A movement joint stops working when its sealant splits or sets hard. We cut out the failed sealant and set the depth with backing, then a flexible sealant matched to the movement goes in. Common call-outs are for floor or wall movement joints that have failed and leaks that keep coming back after resealing, on shrunken worktop sealant, leaking tray & enclosure joints and botched or over-sealed joints.
In a village or hamlet like Crouch, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
A 12-month guarantee comes as standard.
- Where
- Crouch (ME13)
- Wider area
- Kent
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before we start
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Work for landlords, hotels and businesses
For anyone letting property in or around Crouch, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs.
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
Looking after it afterwards
A little care helps the new joints last. We recommend:
- Find out why the sealant failed first
- Clean sealant with mild products only
- Look for stains below bathrooms now and then
- Do not wait for a small gap to become a leak
Go easy on the new sealant: no scraping, scouring pads or harsh chemicals.
If a joint has failed more than once, stop resealing it. Have someone find out why, or the next bead will go the same way.
What we do, step by step
There isn’t much for you to do on the day. Point us to the joints and we will get on with it. The job generally takes a few hours for a typical bath or shower, longer where several layers have been applied from start to finish. Somewhere like Crouch needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Old beads and residue are removed down to clean surfaces.
- We treat any mould and dry the joint thoroughly.
- The right product goes in, with backing where the joint moves.
- The joint is tooled and you’re told about anything else we found.
Getting ready for the visit
- Let us know about stairs, lifts or work at height
- Mention if the joints have been sealed before
- On commercial sites, let us know about site rules
Ask for a quote
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job.
Advice
When to call us in Crouch
Even good sealant ages. Mould grows into the silicone, the surface hardens and the bead shrinks, faster where ventilation is poor. At that point it has to come out.
It’s worth asking for a quote if you see:
- A shower that leaks however often it’s resealed
- Movement joints that have split or pulled away
- Wide, uneven beads that look worse than the old ones
- Over-sealed joints coming away
In the older streets around Church of St Peter and St Paul, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
What your quote should include
- Whether they seal over old material or remove it
- What the quote includes, VAT included or not
- Whether they’re fully insured
- What preparation is included
Nearby places to Crouch
Also in Crouch
Surface by surface
Mouldy bath & shower sealant
Repeat mould usually points to a damp, poorly aired room. Along with resealing, we’ll mention if the room needs better ventilation.
Movement & expansion joints
Movement joints in floors, walls and façades need a flexible sealant set to the right depth. Failed sealant is cut out, backing rod or tape is fitted and the joint resealed with a low-modulus product.
FAQs for Crouch
Do you cover smaller places like Crouch?
Yes. Crouch is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
I let a flat near Selling station. Can you help?
Yes. We work for landlords and letting agents as well as householders, and several properties can be quoted together. You can call 0345 464 0079 or email us with the details for a clear quote.
Will the old sealant be removed?
Always. Sealing over the old bead is the commonest cause of early failure, so we never do it.
Someone resealed my shower and it’s leaking again. Can you help?
Yes. There’s generally a reason: sealant over sealant, movement or another leak, and we deal with the cause first.
How long will it take to strip and reseal the joint?
It takes a few hours for most joints, depending on how much old sealant has to come out. We will give you a timescale when we quote.
Does remedial work come with a guarantee?
Yes, with our one-year guarantee. Where we have flagged another fault, it needs fixing for the joint to last.
Can you strip sealant from an acrylic tray safely?
Yes, with care. The old bead is cut and lifted with tools that suit the surface, and the residue is cleaned away. We point out any damage that is already there.
What if resealing won’t fix my leak?
Then we explain what we’ve found. You may need a plumber or bathroom fitter.
What affects the quote in Crouch
We don’t publish a price list, because jobs vary so much. What we look at:
- The amount of work
- The number of rooms or windows
- Working hours on commercial sites
- How much old sealant there is and how hard it is to remove
Leaving a failed joint normally makes the job bigger, not smaller, as water and mould keep getting in. If you’re unsure, phone 0345 464 0079 or drop us an email for an honest opinion and a quote.
Asking for a quote
There’s no need for technical detail. Just tell us:
- How we’d reach the joints
- Where the property is
- Pictures of the joints, sent by email
- Whether it has been sealed before
Call for a quick quote, or email us if that’s easier. Tell us about the joints that need doing and we will talk you through the work and give you a clear price.
When something else is needed
Honest advice matters more to us than a booking, so here’s what sealant cannot fix:
- Sealant in an older building that needs testing for asbestos first
- A tray or bath that’s cracked
- A tray or worktop that needs refixing first
If you are not sure, just phone 0345 464 0079 or send us an email and we will give you a straight answer before booking.
Joints and surfaces we work on
- Failed movement joints
- Expansion joints
- Botched or over-sealed joints
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Shrunken worktop sealant
Remedial sealant in Crouch: local notes
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
If you look after a building such as Boughton-under-Blean and Dunkirk Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s. Rented homes near Selling station change hands often, and failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Crouch is about 3 miles south-east of Preston, in Kent. Every kind of property in Crouch is covered for remedial sealant. The work is guaranteed for a year. We cover 922 towns and villages across Kent, large and small. Chelmsford is on our list too, about 37 miles from Crouch.
Jobs for remedial sealant in ME13 is quoted and booked the same way as anywhere else. Neighbouring places we cover for remedial sealant include South Street (1 mile south-east), Gushmere (1 mile south-west), Neames Forstal (1 mile south), Hickmans Green (1 mile east) and Oversland (1 mile south-east). Larger places within reach include Ashford (10 miles south), Canterbury (6 miles east), Sittingbourne (10 miles north-west), Whitstable (6 miles north-east), Faversham (3 miles north-west) and Herne Bay (10 miles north-east).
What’s near Crouch
Typical jobs here are in homes near The Sondes Arms and Mount Ephraim Gardens, among other places. The closest station to Crouch is Selling station, roughly 0.5 miles south. A little further out are Tower keep castle at Chilham (3 miles south). Not far away are Blean Woods RSPB Reserve.