Kent · England
Remedial sealant & repairs in Winterbourne, Kent
We cover Winterbourne for removing failed, mouldy or leaking sealant and putting it right. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Sealant that came away because the surface wasn’t prepared
- A second bead peeling off the first
- Smears and lumps from a botched reseal
Can I do it myself?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
How we handle remedial sealant in Winterbourne
In Winterbourne, as anywhere, remedial jobs tend to look alike: over-sealed joints, hidden mould, repeat leaks and split movement joints. Each is stripped back and done again properly. We work on shrunken worktop sealant, expansion joints and leaking tray & enclosure joints, and common reasons people get in touch are floor or wall movement joints that have failed and over-sealed joints coming away.
In a village or hamlet like Winterbourne, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
There’s a 12-month guarantee on every job, large or small.
- Where
- Winterbourne (ME13)
- Wider area
- Kent
- Guarantee
- One year on every job
- Quote
- A clear price before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Remedial sealant in Winterbourne: local notes
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
Letting a property close to Selling station? Then botched sealant from a previous quick fix is easier to strip out between tenants. Homes close to Christ Church include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them. If you look after a building such as Boughton-under-Blean and Dunkirk Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Winterbourne is about 4 miles south-east of Faversham, in Kent. Anywhere in ME13, we can carry out remedial sealant at your property. 922 places in Kent are on our list. Our Chelmsford page covers work nearby.
Jobs for remedial sealant in ME13 is quoted and booked the same way as anywhere else. If you are just outside Winterbourne, we cover Hickmans Green (1 mile north-west), Oversland (1 mile south-west), South Street (1 mile west), Boughton under Blean (1 mile north) and Crouch (1 mile west). Further out, we also cover Ashford (11 miles south), Canterbury (5 miles east), Sittingbourne (11 miles north-west), Whitstable (6 miles north-east), Faversham (4 miles north-west) and Herne Bay (9 miles north-east).
Near you in Winterbourne
Locally, jobs take us to homes and businesses close to The Queens Head pub and Mount Ephraim Gardens and the streets around them. The closest station to Winterbourne is Selling station, roughly 1 mile south-west. Other landmarks nearby include Chilham Castle (2.9 miles south) and Eastbridge Hospital of St Thomas the Martyr (5.1 miles east). For a walk, there’s Blean Woods RSPB Reserve.
Places near Winterbourne
More services for Winterbourne
Questions from Winterbourne
Do you cover Winterbourne for remedial sealant?
Yes, Winterbourne is within the area we cover. Our work covers London and the South East. Just call 0345 464 0079 or send us an email with a few details of the job.
Do you work for landlords with property near Selling station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just ring 0345 464 0079 or email us with the address and what needs doing, and we will send you a clear quote.
Can you fix a reseal that hasn’t worked?
Yes. All the sealant comes out, we find out why it failed, and the joint is resealed properly.
Do you have insurance?
Yes. We are fully insured for every job we do.
Will the old sealant be removed?
Yes. We cut out all the old sealant and clean the joint before resealing.
Can you work on commercial sites?
Yes. Hotels, offices and other businesses use us and we’re fully insured.
Can I choose the sealant colour?
Yes. White, clear and grey are common, and other colours are available for many products, and we will agree it with you first.
Is there any odour?
Possibly a little. Any smell clears as the sealant cures.
Keeping the joints in good condition
So the new joints stay in good condition:
- Look for stains below bathrooms now and then
- Keep bleach and abrasives off the bead
- Keep movement joints clear of mortar and paint
- Report a tray that rocks or a worktop that lifts
Don’t let anyone seal over it later. Over-sealing is how many remedial jobs start, so the old bead should always come out first.
A split movement joint lets rain into walls and floors, and the longer it’s left, the more the joint edges break down. A joint with sound edges is far easier to reseal.
When something else is needed
Before booking, it’s worth knowing the limits too:
- Plumbing leaks behind walls or under trays
- A bath, tray or worktop that moves until it’s properly fixed
- Older mastics that may need an asbestos check before removal
If you’re not sure, just phone 0345 464 0079 or drop us an email and we’ll give you a straight answer.
Where we work in Winterbourne
- Expansion joints
- Leaking tray & enclosure joints
- Botched or over-sealed joints
- Shrunken worktop sealant
- Mouldy bath & shower sealant
- Failed movement joints
How we quote for remedial sealant
You will get a clear quote before any work starts. It takes into account:
- The size of the job
- Whether old sealant or filler has to be cut out
- Access and height
- The type of sealant required
What it costs depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before work begins.
What we need to know
You do not need to know the technical terms. It helps if you can tell us:
- Whether it has been sealed before
- Photos by email, if that’s easy
- The rough size of the job
- Whether it’s a home or a business
For remedial sealant in Winterbourne, phone 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and you will get a clear quote before any work starts.
How it works
We keep the work tidy and contained to the area we are working on, so you can get on with your day. The job generally takes a few hours for most joints, depending on how much old sealant has to come out, and we explain the cure time before we leave. For a village or hamlet like Winterbourne, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We start by checking the joint for movement, leaks and the reason it failed.
- All the old sealant comes out, including any layers underneath.
- We clean the joint, treat any mould and let it dry.
- Where the joint moves, backing and a flexible sealant suited to the movement go in.
- Finally we finish the joint and talk you through what we found.
Preparing for the visit
- On commercial sites, let us know about site rules
- Plan for the work area to be out of bounds to pets and children
- Where the joints are inside, avoid wetting them before we arrive
Getting a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. When it suits you, ring 0345 464 0079 or send us an email.
Advice
Landlords, agents and businesses in Winterbourne
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can be quoted together.
Letting agents often deal with us directly. Tell us the address, the job and how access works and we’ll give you a quote.
What the job involves on each surface
Leaking trays & enclosures
Where the joints are the problem, every bead is stripped and resealed with anti-fungal sanitary silicone, including the screen profile and tray edges.
Windows & doors
Failed frame mastic is often hard, cracked and in several layers. We remove it all and clean back to sound surfaces.