Isle of Wight · England

Remedial sealant & repairs in Clatterford, Isle of Wight

Failed sealant joints in Clatterford need attention? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.

  • Sealant peeling off a dusty or damp surface
  • Caulk or the wrong sealant used in a wet area
  • Worktop sealant that has shrunk and split

Remedial sealant for Clatterford homes and businesses

For landlords and businesses

Housing providers, facilities teams and property managers book us too. Several sites can be quoted together.

A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.

How we handle remedial sealant in Clatterford

Two decades of sealant work means we recognise most failures quickly. We are ARBOMaster approved and fully insured, and remedial work carries our 12-month guarantee. We work on failed movement joints, expansion joints and leaking tray & enclosure joints, and people most often call us about leaks that keep coming back after resealing and decorators’ caulk around a bath or shower.

For a small place like Clatterford, remedial sealant is planned like any other job: it just means planning the journey and access beforehand. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.

The work is covered for a year after we finish. If there’s a problem with it, please ring 0345 464 0079 or drop us an email.

Sealant gun close-up on a shower enclosure wall joint
Place
Clatterford (PO30)
Wider area
Isle of Wight
Guarantee
One year on every job
Quotes
Quoted before any work starts
Phone
0345 464 0079
Updated
26 October 2026

What happens if it’s left?

DIY removal often leaves scratches and a film of residue, and any film left behind stops new sealant sticking. Careful removal is most of a remedial job. In a small place like Clatterford, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.

The cost reflects the work involved, not a rough estimate. That is why we ask about the job first.

Why us?

  • White, clear, grey or another colour, product permitting
  • Anti-fungal silicone where joints get wet
  • Colour agreed with you before we start
  • Arbo and Everbuild products

See our cost guide and what customers say.

Surface by surface

Mouldy bath & shower sealant

Mould that has grown into silicone doesn’t clean out for good. The sealant is cut out completely, the joint treated with a mould remover and dried ahead of a new anti-fungal bead.

Movement & expansion joints

Joints filled with mortar, grout or rigid filler can’t move. Where it can be raked out, we replace it with flexible sealant.

The process

On the day, we start by going over the job with you, so there are no surprises. We protect the surfaces around the joints before any work begins. The work generally takes a few hours for a typical bath or shower, longer where several layers have been applied. In a small place like Clatterford, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. First we find out how and where the joint has failed.
  2. All the old sealant comes out, including any layers underneath.
  3. We clean the joint, treat any mould and let it dry.
  4. Moving joints get backing and a flexible sealant to suit.
  5. We tool the joint and tell you about anything else that needs attention.

Before we arrive

  • Mention any sign-in or site rules at work premises
  • Tell us about any previous sealing or DIY attempts
  • Tell us about access, such as stairs, a lift or high-level joints

Getting a quote

It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. Whenever you are ready, ring 0345 464 0079 or send us an email.

Ask for a quote

Read more

What remedial sealant looks like in Clatterford

There are hotels and other places to stay in and around Clatterford. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.

Schools such as St Thomas of Canterbury Catholic Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes. In the older streets around Church of St. Nicholas in Castro, timber floors under older bathrooms flex, so joints need a sealant that moves with them.

Clatterford is about 1 mile south-west of Newport, in the Isle of Wight. Clatterford gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. 125 places in the Isle of Wight are on our list, from the larger towns to small villages. Our Portsmouth page covers work nearby (13 miles or so).

Here we cover the PO30 postcode area for remedial sealant. You’ll find streets such as Down Lane, Castle Lane and High Street. We also cover Carisbrooke (1 mile north), Plaish (1 mile south-west), Gunville (1 mile north), Bowcombe (1 mile south-west) and Gatcombe (2 miles south). Further out, we also cover Ryde (7 miles east), Cowes (5 miles north), Sandown (7 miles east), Shanklin (7 miles south-east), Ventnor (8 miles south-east) and East Cowes (5 miles north). If you are somewhere remote, a little more planning is needed, so let us know when you get in touch.

Around Clatterford

Typical jobs here are in homes near The Waverley pub, Island Innovation VI Form Campus and Christ The King College and the streets around them. Other landmarks nearby include Whitecroft Hospital (1.3 miles south-east) and Carisbrooke Castle (within half a mile east). For a walk, there’s Brighstone Down and Briddlesford Nature Reserve.

Map of Clatterford © OpenStreetMap contributors

Quotes for remedial sealant in Clatterford

Jobs vary more than people expect. What affects the quote:

  • Whether the work is at height
  • The number of rooms or windows
  • Any working-time requirements on site
  • How much old sealant there is and how hard it is to remove

Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.

What we need to know

To help us quote quickly, please include:

  • Any previous sealing or DIY work
  • How many joints, rooms or windows are involved
  • The type of property
  • A few photos by email, if you can

Want a quote for remedial sealant? Please phone 0345 464 0079 or drop us an email and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.

Can I do it myself?

Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.

Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.

Questions from Clatterford

Is Clatterford within the area you cover?

Yes. Clatterford is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.

Is Clatterford in your area for remedial sealant?

Yes, Clatterford is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or email us with a few details of the job, and we will give you a clear price.

What information do you need?

Tell us what needs doing and where. If we need more, we will ask.

Can I add another job to the visit?

Yes. Just list everything you need.

Can you take off two layers of silicone?

Yes. Both layers come out; new silicone does not bond to old silicone, which is why over-sealing fails.

Where are you based?

Mr Mastic is based in Crawley. We cover Clatterford and the rest of the Isle of Wight, along with the rest of our area.

Should I try DIY first?

For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.

Do you hold any approvals?

Yes. We hold ARBOMaster approved applicator status.

What sealant work can’t fix

Before you book, it’s worth knowing the limits too:

  • A tray or worktop that needs refixing first
  • Older mastics that may need an asbestos check before removal
  • Leaks from a shower valve, waste or pipework (a plumber’s job)

Not sure which it is? You can call 0345 464 0079 or send us an email and we’ll tell you honestly.

What we seal

  • Mouldy bath & shower sealant
  • Botched or over-sealed joints
  • Failed movement joints
  • Leaking tray & enclosure joints
  • Shrunken worktop sealant
  • Expansion joints
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job