Buckinghamshire · England
Remedial sealant & repairs in Broughton, Buckinghamshire
Removing failed, mouldy or leaking sealant and putting it right in Broughton, with a one-year guarantee on every job. Call for a quick quote.
- A shower that leaks however often it’s resealed
- Caulk or the wrong sealant used in a wet area
- Gaps opening along the back of the worktop
Honest limits
To be straight with you, some problems need a different trade:
- Older mastics that may need an asbestos check before removal
- Cracks in the fitting rather than the joint
- A bath, tray or worktop that moves until it’s properly fixed
Not sure which it is? You can ring 0345 464 0079 or send us an email and we’ll tell you honestly before you book.
What we seal
- Shrunken worktop sealant
- Leaking tray & enclosure joints
- Botched or over-sealed joints
- Mouldy bath & shower sealant
- Failed movement joints
- Expansion joints
About our remedial sealant in Broughton
Not every leak is a sealant leak. Cracked trays, leaking wastes and faulty valves often look like a sealant problem. When the fault is elsewhere, we say so instead of resealing for the sake of it. If you’re dealing with repeat leaks from the same joint and smears and lumps from a botched reseal, we can help, whatever the surface.
Smaller places like Broughton still have plenty of bathrooms that work hard every day. Older or newer, every room gets the same approach: all the old material out, the joint cleaned and dried, then new sealant or grout.
Our work is backed for twelve months.
- Where
- Broughton (HP22)
- Region
- Buckinghamshire
- Guarantee
- One year on every job
- Quote
- A clear price before we start
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Work for landlords, hotels and businesses
For anyone letting property in or around Broughton, several properties can go on one quote. Just tell us the addresses and what each one needs, and pictures by email help.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Nearby places to Broughton
Other services in Broughton
Broughton: your questions answered
Is Broughton within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
I let a flat near Aylesbury station. Can you help?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or email us and tell us about the property, and we’ll send you a clear quote.
Do you hold any approvals?
Yes. We are an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
Can you reseal a split movement joint?
Yes. The depth is set with backing so the sealant only bonds to the two sides, which lets it stretch.
Someone resealed my shower and it’s leaking again. Can you help?
Yes. We will take all the sealant out, look for why it failed and reseal it properly.
Where is Mr Mastic based?
Our base is Crawley. We work across South East England, London and Scotland.
Can you strip sealant from an acrylic tray safely?
Yes. The old bead is cut and lifted with tools that suit the surface, then clean off the residue. Any existing damage is pointed out before any work starts.
Do you offer different sealant colours?
Most of the time, yes. We’ll explain which colours are available.
Different surfaces, different methods
Mouldy bath & shower sealant
Mould can sit behind the silicone, not just in it. We treat the exposed joint once the bead is out.
Worktops & kitchens
Kitchen joints often have grease and cleaning residue deep in them, so cleaning takes longer than in a bathroom before resealing.
What remedial sealant looks like in Broughton
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For an older house near a landmark such as Church of St James, timber floors under older bathrooms flex, so joints need a sealant that moves with them. Rented homes near Aylesbury station change hands often, and botched sealant from a previous quick fix is easier to strip out between tenants. If you look after a building such as Bierton Church of England Combined School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Broughton is about 2 miles east of Aylesbury, in Buckinghamshire. From the centre of Broughton to the outskirts, remedial sealant is available for homes and businesses alike. 263 places in Buckinghamshire are on our list. Oxford is on our list too, about 20 miles from Broughton.
Here we cover the HP22 postcode area for remedial sealant. Whether your property is on Nutmeg Close, Foxtail Close and Herald Street or a nearby road, we can help. We also cover Burcott (1 mile north-west), Broughton Crossing (1 mile west), Bierton (1 mile north-west), Bedgrove (1 mile south) and Turnfurlong (1 mile south-west). Within a short drive, we also cover High Wycombe (14 miles south), Chesham (10 miles south-east), Buckingham (15 miles north-west), Amersham (13 miles south-east), Princes Risborough (7 miles south) and Haydon Hill (3 miles west).
Local landmarks in Broughton
Around Broughton, our work takes us to homes and buildings near The Dog House, Stocklake Park Community School and Aylesbury Grammar School and the streets around them. The closest station to Broughton is Aylesbury station, about 2 miles south-west of the centre. A little further out are Friars Square (1.9 miles west) and Roald Dahl Children's Gallery (1.9 miles west). Open spaces near Broughton include Dancersend Nature Reserve and Haddington Hill.
How we quote for remedial sealant
Call for a quick quote. The main things that affect it are:
- Whether old sealant or filler has to be cut out
- How easy the joints are to reach
- Which sealant suits the joint
- The number of rooms or windows
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all make a difference, and we’ll explain the quote if you ask.
What we need to know
To help us quote quickly, please include:
- Pictures of the joints, sent by email
- Any previous sealing or DIY work
- Whether it’s a home or a business
- The address or postcode of the job
It all starts with a short chat. Describe the problem, the location and the size of the job, and we will talk you through what we’d do. When it suits you, call 0345 464 0079 or send us an email.
What happens on the day
A visit follows a simple pattern: we check the joints, protect the area around them, do the work and tidy away. Most jobs take a few hours for most joints, depending on how much old sealant has to come out. In a smaller place like Broughton, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Each layer is cut out and the residue cleaned off.
- We treat any mould and dry the joint thoroughly.
- The right product goes in, with backing where the joint moves.
- The joint is tooled and you’re told about anything else we found.
How to prepare
- For business premises, tell us about site rules or sign-in
- Let us know about parking restrictions
- Mention any leaks or damp you’ve noticed
Get a quote
We do not publish a price list, as no two jobs are quite the same. Instead, we send you a clear quote for your job. To get started, call 0345 464 0079 or send us an email.
Related advice
Why it’s worth doing now in Broughton
It’s easy to scratch acrylic, enamel or an uPVC frame cutting out old sealant, and the residue left behind stops the next bead bonding. Careful stripping is where most of our time goes. In an older home around Broughton, damp from a failed joint can get into timber and plaster, which is far harder to put right than the sealant itself.
The cost reflects the work involved, not a rough estimate. That is why we ask about the job first and agree the price before starting.
Why us?
- Every job guaranteed for a year
- Anti-fungal silicone where joints get wet
- 4.9 on Google from 180+ five-star reviews
- You choose the colour before work begins
Aftercare tips
A little care helps the new joints last. We recommend:
- Don’t add new sealant on top of old
- Keep movement joints clear of mortar and paint
- Air the bathroom so the sealant can dry
- Have loose fittings fixed before resealing
Leave the new joint to cure fully before it gets wet or moves: generally around 24 hours, or as long as we advise.
Do not keep resealing the same joint. Get the cause found first, or the next bead will go the same way.