Kent · England

Brookland Remedial Sealant

Professional remedial sealant in and around Brookland, with old sealant always removed completely and a 12-month guarantee.

  • Decorators’ caulk around a bath or shower
  • Wide, uneven beads that look worse than the old ones
  • Worktop sealant that has shrunk and split

Trusted remedial sealant in Brookland

What affects the quote in Brookland

Every job gets its own quote. This is what makes a difference:

  • The size of the job
  • How easy the joints are to reach
  • Whether old sealant or filler has to be cut out
  • The number of rooms or windows

What you pay reflects the work, not a rough estimate. That is why we ask about the job first.

Helping us quote

Before you ask for a quote, have a think about:

  • Pictures of the joints, sent by email
  • Any access issues, like height or stairs
  • The type of property
  • Where the job is, and your postcode

A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.

Remedial sealant in Brookland, done properly

Decorators’ caulk in a shower, bathroom silicone on a window, a rigid filler in a movement joint fails however neatly it’s applied. Out it comes, and in goes a sealant suited to the job. We work on shrunken worktop sealant, failed movement joints and mouldy bath & shower sealant, and people most often call us about beads that never stuck properly and decorators’ caulk around a bath or shower.

Being in a small place like Brookland makes no difference to the job itself: it just means planning the journey and access beforehand. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.

Whatever the size of the job, it’s backed by our one-year guarantee.

Where
Brookland (TN29)
Wider area
Kent
Guarantee
One year on every job
Price
A clear price before work begins
Call
0345 464 0079
Updated
26 October 2026
Sealant gun close-up on a shower enclosure wall joint

DIY sealant or a professional job?

What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.

A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.

What we can’t put right

It helps to know what we can’t do too:

  • Failed tanking or loose tiles behind the sealant
  • Older mastics that may need an asbestos check before removal
  • Leaks from a shower valve, waste or pipework (a plumber’s job)

If in doubt, call 0345 464 0079 or email us and we will say what we think.

What we seal

  • Failed movement joints
  • Expansion joints
  • Botched or over-sealed joints
  • Shrunken worktop sealant
  • Mouldy bath & shower sealant
  • Leaking tray & enclosure joints

The process

A visit follows a simple pattern: we check the joints, mask and protect the surrounding surfaces, do the work and tidy away. It generally takes a few hours, depending on how many layers have to come out. Somewhere like Brookland needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.

  1. Surrounding tiles, trays and frames are protected first.
  2. Every layer of failed sealant is stripped out.
  3. We clean and degrease the joint and look for signs of movement or water.
  4. Once dry, a suitable sealant is applied and tooled.
  5. You get the cure time and our view on why the joint failed.

How to prepare

  • Mention any leaks or damp you’ve noticed
  • Mention any parking rules near the property
  • Clear the area around the work

Getting a quote

For remedial sealant in Brookland, call 0345 464 0079 or drop us an email. Tell us what the problem is and where, and you’ll get a clear quote before any work starts.

Get a price

Read more

Remedial sealant in Brookland: local notes

Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.

If you live in an older home near St Augustine's Church, older homes can move a little, which is hard on rigid grout and tired sealant. Schools such as Brookland Church of England Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes. Rented homes near Appledore (Kent) station change hands often, and failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.

Brookland is about 10 miles south of Ashford, in Kent. Jobs in Brookland get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. Brookland is one of 922 places in Kent we cover. Our Brighton page covers work nearby (43 miles or so).

Work in TN29 works the same way as everywhere else we cover. You’ll find streets such as High Street, Brook Grove and Rye Road. If you’re just outside Brookland, we cover Brenzett (1 mile north-east), Snargate (2 miles north), Ivychurch (3 miles north-east), Old Romney (3 miles east) and Appledore (3 miles north-west). Within a short drive, we also cover Ashford (10 miles north), Hythe (12 miles north-east), Tenterden (8 miles north-west), Cheriton (15 miles north-east), Kennington (12 miles north) and New Romney (5 miles east).

What’s near Brookland

Locally, jobs take us to homes and businesses close to The Royal Oak Inn, among other places. Brookland’s nearest station is Appledore (Kent) station, roughly 2.5 miles north. Other landmarks nearby include Brenzett Aeronautical Museum (1.6 miles north-east) and Romney 'castle' (2.9 miles east). Not far away are Burnthouse Pen.

Map of Brookland © OpenStreetMap contributors

Aftercare tips

Aftercare is simple:

  • Keep bleach and abrasives off the bead
  • Get the cause of a repeat leak found before resealing
  • Have loose fittings fixed before resealing
  • Don’t add new sealant on top of old

Give the new sealant its full cure time: usually around 24 hours, or as long as we advise.

Mould trapped under over-sealed joints spreads unseen. When it finally shows, the whole bead needs to come out.

Why it’s worth doing now in Brookland

Adding more sealant is the usual quick fix, and it rarely works. It doesn’t grip the old layer, leaving the leak in place and one more layer to cut out later. Around Brookland, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.

No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part.

Why book with us

  • ARBOMaster approved applicator
  • Sanitary silicone with an anti-fungal additive in wet areas
  • Any old sealant cut out fully, not covered over
  • Homes, businesses and hotels

Take a look at what affects the cost and our reviews.

Landlords, agents and businesses in Brookland

Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.

Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.

Questions from Brookland

Can you help a landlord with a rental near Appledore (Kent) station?

Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can ring 0345 464 0079 or send us an email with the details for a clear quote.

Can you do remedial sealant in Brookland?

Yes. We work across London and the South East, and Brookland is part of that. Just phone 0345 464 0079 or email us with a few details of the job, and we will give you a clear quote.

Can you take off two layers of silicone?

Yes. We remove every layer; over-sealing fails because silicone won’t bond to silicone.

Do you work for hotels and businesses?

Yes, regularly. Larger jobs can be planned room by room or area by area to suit the site.

My shower still leaks after a reseal. Can you sort it?

Yes. We check it’s the sealant and not the tray, valve or waste, then the joints are stripped and resealed.

How long before the joint can be used?

Many sealants skin over quickly but take longer to cure fully. We will tell you how long to leave the joint.

What if resealing won’t fix my leak?

In that case, we tell you what we’ve found. You may need a plumber or bathroom fitter before any new sealant goes on.

Is it messy?

We keep the work tidy. Nearby surfaces are protected, and the area is left clean when we finish.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job