Kent · England
Brookland Regrouting
Problem with your tiled areas in Brookland? We remove the old material, prepare the joints and seal them properly.
- Greasy, stained grout behind the hob
- Good tiles let down by tired grout
- Grout that stays dark however much it’s cleaned
Common problems we fix in Brookland
Hard water and soap leave a film on grout and stick to it. The grout beneath can stain and weaken, and at that point, new grout is the better answer.
Look out for these signs:
- Gaps where the shower grout has gone
- Old grout in a dated colour
- Greasy, stained grout behind the hob
- Crumbling grout between the tiles
In the older streets around St Augustine's Church, walls and floors in older homes can move, and sealant and grout show it first.
Before you book anyone
- Is the old sealant removed completely?
- How the surfaces are prepared before sealing
- Whether VAT is included
- Who does the work, and how experienced they are
Regrouting in Brookland, done properly
Grout is the filler between your tiles, while sealant goes where tiles meet a bath, tray or worktop. When grout cracks or washes out, water can get in behind the tiles. We rake it out and replace it, then reseal the corners and edges. Common call-outs are for splashback grout that has darkened and grout washed out of a shower, on shower walls, bathroom wall tiles and tiled floors.
Being in a small place like Brookland makes no difference to the job itself: the journey and access are simply agreed in advance. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
Every job comes with a one-year guarantee, wherever you are in Kent.
- Place
- Brookland (TN29)
- Wider area
- Kent
- Cover
- One year on every job
- Quotes
- A clear price before we start
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Towns and villages near Brookland
Also in Brookland
Honest limits
Some problems need a builder, plumber or other trade rather than us:
- A leaking wet room membrane
- Loose tiles, which need refixing first
- A structure that flexes behind the tiles
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we’ll tell you honestly.
What we seal
- Kitchen splashbacks
- Bathroom wall tiles
- Tiled floors
- Shower walls
- Wet rooms
- Bathroom floors
What affects the cost of regrouting
Every job gets its own quote. This is what makes a difference:
- The product the joint needs
- The amount of work
- Mould in or behind the old joints
- How many areas need sealing
The cost depends on how much there is to do, how much old material has to come out and access to the work. You will have a clear quote before any work starts.
What we need to know
When you call or email, these details help:
- What’s wrong with the joints now
- Whether it’s a home or a business
- Any access issues, like height or stairs
- Pictures of the joints, sent by email
To get a quote, ring 0345 464 0079 or email us with the location and a short description of the problem. You’ll have a clear quote before we start.
Landlord and commercial work in Brookland
Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.
In hotels, rooms out of use cost money, so the work can be planned room by room. Hotel work is part of what we do, alongside homes and businesses.
What we do, step by step
Good joint work is mostly preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it usually takes anything from a few hours to a full day, depending on the area. Somewhere like Brookland needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We check the tiles for any that are hollow or loose.
- We rake out the grout evenly, protecting the tile edges.
- We vacuum the joints so the new grout bonds.
- New grout is pressed into the joints and the tiles are cleaned.
- We finish with silicone in the moving joints.
How to prepare
- Where the joints are inside, avoid wetting them before we arrive
- Let us know if you’ve seen damp or leaks
- Let us know about stairs, lifts or work at height
Get a quote
Call for a quick quote, or email us if that is easier. Describe what needs sealing and we will explain what’s involved and send you a clear quote.
Read more
Brookland: your questions answered
Do you cover smaller places like Brookland?
Yes. Brookland is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you do regrouting in Brookland?
Yes, Brookland is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or send us an email with a few details of the job, and we’ll send you a clear quote.
How long does the job take?
It depends on the size of the job, but most jobs take a few hours, or longer for a fully tiled room. We will give you a better idea when we quote.
Is the work guaranteed?
Our 12-month guarantee applies to all our work. We’re also fully insured.
Can you quote for more than one area?
Yes. Tell us about everything you’d like done and we’ll quote it together.
Do you grout the corners?
We seal corners with silicone. They flex and grout cannot take that movement.
Do you have insurance?
Yes. We are fully insured, and we have been doing sealant work for more than 20 years.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are glad to have it sorted.
How to look after the new joints
A little care helps the new joints last. Our advice:
- Keep the fan on after showering
- Get any tile that moves checked promptly
- Rinse soap off the tiles after each shower
- Skip wire brushes and scourers
Have any tile that moves checked straight away. Movement will crack the new grout and open a path for water.
Grout that’s washing out of a shower shouldn’t be left. Every shower pushes more water into the gaps and it can end up in the wall or the ceiling below.
Surface by surface
Corners and edges
The joint between tiles and a bath, tray or worktop gets silicone. Grout there would crack.
Kitchen splashbacks
The grout by the hob and sink takes most of the mess. We renew the grout and the worktop sealant.
Brookland homes and their sealant
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
For landlords with property near Appledore (Kent) station, clean grout and fresh sealant between tenancies make a bathroom look cared for again. Schools such as Brookland Church of England Primary School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Brookland is about 10 miles south of Ashford, in Kent. We provide regrouting to homes and businesses in Brookland and the surrounding area. 922 places in Kent are on our list, large and small. We also work in Brighton, about 43 miles from Brookland.
We cover every part of TN29 for regrouting and the streets around it. Whether your property is on High Street, Brook Grove and Rye Road or a nearby road, we can help. We also cover Brenzett (1 mile north-east), Snargate (2 miles north), Ivychurch (3 miles north-east), Old Romney (3 miles east) and Appledore (3 miles north-west). Larger places within reach include Ashford (10 miles north), Hythe (12 miles north-east), Tenterden (8 miles north-west), Cheriton (15 miles north-east), Kennington (12 miles north) and New Romney (5 miles east).
Local landmarks in Brookland
Typical jobs here are in homes near The Royal Oak Inn. Brookland’s nearest station is Appledore (Kent) station, about 2.5 miles north. Other landmarks nearby include Brenzett Aeronautical Museum (1.6 miles north-east) and Romney 'castle' (2.9 miles east). The countryside around Brookland includes Burnthouse Pen.