Hampshire · England

Remedial sealant & repairs in Bridgemary, Hampshire

Problem with your failed sealant joints in Bridgemary? We cut out the old, prepare the joints and apply the right sealant.

  • Products that weren’t meant for the joint
  • Gaps opening along the back of the worktop
  • Sealant peeling off a dusty or damp surface

Remedial sealant in Bridgemary

How the visit works

There’s no need to move everything out, just the space around the work. We protect the rest, and the job takes a few hours for a typical bath or shower, longer where several layers have been applied for a typical job. A visit to Bridgemary is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.

  1. We start by checking the joint for movement, leaks and the reason it failed.
  2. We strip the joint completely, removing any layers below.
  3. We clean the joint, treat any mould and let it dry.
  4. Where the joint moves, backing and a flexible sealant suited to the movement go in.
  5. Finally we finish the joint and talk you through what we found.

How to prepare

  • Tell us if parking is tricky
  • Mention any leaks or damp you’ve noticed
  • Clear items away from the joints we’re working on

Getting a quote

To get a quote, phone 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. You will have a clear quote before work begins.

Ask for a quote

Read more

How we handle remedial sealant in Bridgemary

A joint that keeps letting you down needs more than another bead. It helps to have pictures when you ring 0345 464 0079 or email us, and say how long ago it was last done. If you have over-sealed joints coming away and sealant that came away because the surface wasn’t prepared, we can put it right.

Homes around Bridgemary range from older cottages to more recent houses. Older homes can move a little with the seasons, which is hard on tired sealant and rigid grout.

The work is covered for a year after we finish. If anything isn’t right with it, ring 0345 464 0079 or send us an email.

Mr Mastic applicator kneeling beside a white bath, sealing the joint where the bath meets beige wall tiles
Place
Bridgemary (PO13, PO12)
Region
Hampshire
Cover
One year on every job
Quotes
A clear quote up front
Phone
0345 464 0079
Page updated
26 October 2026

What sealant work cannot fix

In fairness, some problems need a different trade:

  • Movement from fittings that are not supported
  • Leaks from a shower valve, waste or pipework (a plumber’s job)
  • Older mastics that may need an asbestos check before removal

If in doubt, call 0345 464 0079 or send us an email and we’ll say what we think.

Where we work in Bridgemary

  • Botched or over-sealed joints
  • Mouldy bath & shower sealant
  • Expansion joints
  • Shrunken worktop sealant
  • Failed movement joints
  • Leaking tray & enclosure joints

Why act early in Bridgemary

Leaks that are left keep doing damage out of sight: wet floors, stained ceilings and swollen worktops. Dealing with the joint now is a small job by comparison. Homes in smaller places like Bridgemary can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.

A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.

What you get with us

  • White, clear, grey or coloured to suit, where the product allows
  • Rated 4.9 stars on Google
  • Tidy, careful work
  • One-year guarantee on every job

Take a look at what affects the cost or customer reviews.

Common questions in Bridgemary

Is Bridgemary in your area for remedial sealant?

Yes, Bridgemary is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or email us with a few details of the job, and we will send you a clear quote.

Do you cover smaller places like Bridgemary?

Yes, we do. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.

How long should I leave it?

Most sealants are touch-dry well before they’re fully cured. We will give you the cure time for the product we used.

Do the sealants smell?

That depends on the sealant. Some products have a noticeable smell, others very little.

Will it make a mess?

We keep the work tidy. We protect what’s around the joints.

Do you do commercial work?

Yes, regularly. Larger jobs can be planned room by room or area by area.

Do you work for landlords and businesses?

Yes. Domestic, commercial and hotel work are all part of what we do.

Should I try DIY first?

Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.

How to look after the new joints

A little care helps the new joints last. We recommend:

  • Keep an eye on the ceiling below the bathroom
  • Deal with small splits early
  • Never fill a movement joint with mortar or grout
  • Run the fan after every shower

Leave the new joint to cure fully before it gets wet or moves: normally around 24 hours, or as long as we advise.

Warning signs: peeling layers, mould showing through the bead, leaks after showering or cracks in a movement joint. Any of them means it’s time for remedial work.

Remedial sealant in Bridgemary: local notes

Bridgemary is within about 2 miles of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.

If you live in an older home near St Matthew's, walls and floors in older homes can move, and sealant and grout show it first. Rented homes near Fareham station change hands often, and botched sealant from a previous quick fix is easier to strip out between tenants.

Bridgemary is about 1 mile north-west of Gosport, in Hampshire. Wherever you are in the PO13 postcode area, our applicators can take on remedial sealant. Our Hampshire coverage runs to 683 places, Bridgemary among them.

Our applicators cover all of PO13 and PO12 for remedial sealant and the streets around it. Whether your property is on Camp Road, Copse Lane and Agnew Road or a nearby road, our applicators can take on the job. We also cover the places around Bridgemary: Rowner (1 mile north-west), Peel Common (1 mile west), Elson (1 mile south-east), Crofton (1 mile west) and Gosport (1 mile south-east). Within a short drive, we also cover Havant (9 miles east), Eastleigh (13 miles north-west), Fareham (3 miles north-west), Horndean (9 miles north-east), Chandler's Ford (15 miles north-west) and Hedge End (9 miles north-west).

What’s near Bridgemary

Locally, jobs take us to homes and businesses close to The Green Dragon pub and Bridgemary School. The nearest railway station is Fareham station, roughly 2.5 miles north-west of the centre. Well-known places in the area include Search (2.6 miles south-east) and Portchester Castle (2.7 miles north-east). The countryside around Bridgemary includes West of the River Alver and Portsdown Hill.

Map of Bridgemary © OpenStreetMap contributors

What affects the quote in Bridgemary

Your quote is based on your job. We look at:

  • Which sealant suits the joint
  • Access and height
  • Whether old sealant or filler has to be cut out
  • The number of rooms or windows

Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. You will know the price before we begin.

What to tell us for a quote

To make quoting easier, please include:

  • Photos by email, if that is easy
  • If it’s domestic, commercial or a hotel
  • How many joints, rooms or windows are involved
  • Any access issues, like height or stairs

Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will explain how we’d tackle it. When it suits you, call 0345 464 0079 or send us an email.

Common problems we fix in Bridgemary

A lot of failed joints have been sealed over rather than replaced. New silicone cannot stick to the old bead, so the top layer lifts and water and mould collect between the two.

The problems people usually mention when they call include:

  • Smears and lumps from a botched reseal
  • A shower that leaks however often it’s resealed
  • A second bead peeling off the first
  • Dark patches showing through the sealant

For site and facilities teams at buildings such as Rowner Junior, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.

Questions to ask before you book

  • Who does the work, and how experienced they are
  • What preparation is included
  • Which colour the sealant will be
  • Whether they’re fully insured

10 questions to ask before you book

DIY sealant or a professional job?

Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job