Hampshire · England

Fire-rated sealant in Bridgemary, Hampshire

Fire rated sealant across Bridgemary and nearby, with old sealant always removed completely.

  • Sealant items on a fire risk assessment action list
  • Damaged fire sealant left by other trades
  • Gaps filled with a product that isn’t fire-rated

Fire rated sealant in Bridgemary

Can I do it myself?

Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.

Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.

Fire rated sealant for homes and businesses in Bridgemary

Landlords, managing agents and facilities teams use us for the sealant items on a fire risk assessment on buildings across Bridgemary. If you share the list, we can quote for the gaps that need fire-rated sealant. Common call-outs are for gaps flagged on a fire risk assessment and new service routes left unsealed after building work, on linear gaps, flats & HMOs and plasterboard & masonry.

For a pub, café, guest house or shop in or near Bridgemary, its washrooms and kitchen need the same sealant care as any big building, and fire-rated sealant around service openings should be restored after new pipes or cables go through.

Every job is covered by a one-year guarantee.

Place
Bridgemary (PO13, PO12)
Wider area
Hampshire
Cover
12 months on all our work
Quotes
Quoted before any work starts
Telephone
0345 464 0079
Updated
26 October 2026
Mr Mastic applicators lined up beside the company vans, one holding a sealant gun

How to look after the new joints

Joint life depends on how it’s used and looked after. We suggest:

  • Make resealing part of every contractor’s brief
  • Take photos of fire stopping before ceilings or boxing go back
  • Never patch a fire seal with standard sealant
  • Store the list of sealed gaps with your building paperwork

Do not drill through or remove a fire seal without putting it back properly. New services through a sealed wall should include fire stopping in the plan.

An open gap is not only a fire issue: they also let noise, draughts and sometimes pests through. Dealing with them early helps with all of these.

What affects the cost of fire rated sealant

You will get a clear quote before work begins. It takes into account:

  • Access and height
  • The type of sealant required
  • Mould in or behind the old joints
  • When we can work, for business premises

There are no prices on our website, because each job is priced on what it involves. For a quick quote, please ring 0345 464 0079 or email us and we will talk you through it.

Helping us quote

The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:

  • What’s wrong with the joints now
  • Pictures of the joints, sent by email
  • The address or postcode of the job
  • Roughly how big the job is

A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add photos by email if you can.

Landlords, agents and businesses in Bridgemary

Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. We can quote for more than one property at once.

Landlords and agents in Bridgemary can book us as well as householders. Resealing between tenancies is a simple way to keep a property in good order.

Workplaces and buildings in Bridgemary

If you run a hotel, guest house or holiday let in a coastal place like Bridgemary, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.

For buildings such as St Matthew's, service openings in its walls need the right fire-rated sealant, as in any building. For landlords with property near Fareham station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.

Bridgemary is about 1 mile north-west of Gosport, in Hampshire. From the centre of Bridgemary to the outskirts, we cover fire rated sealant for every kind of property. 683 places in Hampshire are on our list, from the larger towns to small villages.

Work in PO13 and PO12 is quoted and booked the same way as anywhere else. If you need fire rated sealant at a property on Camp Road, Copse Lane and Agnew Road or anywhere close by, our applicators can take on the job. We also cover the places around Bridgemary: Rowner (1 mile north-west), Peel Common (1 mile west), Elson (1 mile south-east), Crofton (1 mile west) and Gosport (1 mile south-east). Within a short drive, we also cover Havant (9 miles east), Eastleigh (13 miles north-west), Fareham (3 miles north-west), Horndean (9 miles north-east), Chandler's Ford (15 miles north-west) and Hedge End (9 miles north-west).

Landmarks near Bridgemary

In Bridgemary, that means homes and buildings near The Green Dragon pub and Bridgemary School and the streets around them. The nearest railway station is Fareham station, about 2.5 miles north-west. A little further out are Search (2.6 miles south-east) and Portchester Castle (2.7 miles north-east). Not far away are West of the River Alver and Portsdown Hill.

Map of Bridgemary © OpenStreetMap contributors

What sealant work can’t fix

Honest advice matters more to us than a booking, so here’s what sealant cannot fix:

  • Certifying a building or signing off its fire safety
  • Doors that are not fire doors in the first place
  • Openings too large for sealant, which need batts, boards or another system

If you are not sure, just ring 0345 464 0079 or drop us an email and we will give you a straight answer before you book.

What we seal

  • Pipe & cable gaps
  • Plasterboard & masonry
  • Flats & HMOs
  • Linear gaps
  • Service penetrations
  • Door frames

How it works

We bring everything the job needs with us, so there’s nothing for you to buy. After a quick look at the joints together, the area is protected and the work begins. It normally takes a few hours for a handful of gaps, and longer for a whole building. Parking around Bridgemary is normally easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.

  1. We go through the gaps on your list or survey and check each one’s size and substrate.
  2. We remove any old or unsuitable filler and clean the gap.
  3. Backing or fill is fitted where the product’s tested detail calls for it.
  4. Fire-rated or intumescent sealant is applied to the right depth and tooled.
  5. Locations and products are noted so you have them on file.

Before we arrive

  • Clear items away from the joints we’re working on
  • For indoor joints, keep the area dry beforehand if you can
  • Keep children and pets away from the work area

Ask for a quote

Asking for a quote is easy: tell us what needs doing and where, and roughly how big it is. A few photos by email make the job easier to understand, and we will take it from there.

Ask for a quote

Read more

When to call us in Bridgemary

Movement in the structure can open gaps too: cracked or debonded sealant leaves an open route through the wall. Damage from cleaning, knocks and maintenance adds to it.

People generally contact us when they notice something like this:

  • Damaged fire sealant left by other trades
  • Unsealed gaps around fire door frames
  • Cracked or shrunken fire-rated sealant
  • Sealant items on a fire risk assessment action list

Managing a site like Rowner Junior? Then fire-stopping around service openings should be restored whenever new services go in.

What your quote should include

  • Who turns up on the day
  • What guarantee comes with the work
  • Whether they seal over old material or remove it
  • Whether they’re fully insured

10 questions to ask before you book

Questions from Bridgemary

Can you help a landlord with a rental near Fareham station?

Yes, we work for letting agents and landlords. Just phone 0345 464 0079 or send us an email and tell us about the property, and we will give you a clear quote.

Will you come out to Bridgemary?

Yes. Bridgemary is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.

Is there any odour?

Possibly a little. It fades as the sealant cures.

Do you take on fire stopping in schools and offices?

Yes. We work in flats, HMOs, schools, offices and other commercial buildings, including occupied ones. We agree access and the order of work with you first.

Will you leave a mess?

Tidy work is part of the job. Nearby surfaces are protected.

Will the old sealant be removed?

Yes. All of the old material is cut out and the joint cleaned before applying anything new.

What does fire rated sealant cost?

It depends on the job, so we quote each one individually. For a quick quote, call 0345 464 0079 or drop us an email and let us know what needs doing and where.

Can you do several jobs on one visit?

Of course. Doing several areas at once is generally more efficient, so mention them when you ask for a quote.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job