Hampshire · England
Remedial sealant & repairs in Borden, Hampshire
Remedial sealant for Borden, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Smears and lumps from a botched reseal
- A shower that leaks however often it’s resealed
- Torn expansion joints
When it is not the sealant
To be straight with you, some problems need a different trade:
- A cracked shower tray or bath (that needs repair or replacing)
- Water damage behind tiles that needs a tiler
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
If in doubt, ring 0345 464 0079 or email us and we will say what we think.
Surfaces we seal
- Failed movement joints
- Shrunken worktop sealant
- Botched or over-sealed joints
- Leaking tray & enclosure joints
- Expansion joints
- Mouldy bath & shower sealant
Remedial sealant in Borden
Some sealant jobs aren’t a simple reseal, because someone has already had a go. Silicone laid over silicone, smears across tiles, the wrong product in a moving joint or mould trapped underneath all have to come out before the joint can be done properly. Common call-outs are for beads that never stuck properly and caulk or the wrong sealant used in a wet area, on leaking tray & enclosure joints, mouldy bath & shower sealant and botched or over-sealed joints.
Homes around Borden are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Place
- Borden (GU30)
- Wider area
- Hampshire
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Your questions about remedial sealant in Borden
I let a flat near Liss station. Can you help?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or send us an email and tell us about the property, and we’ll give you a clear price.
Do you cover Borden for remedial sealant?
Yes, Borden is within the area we cover. We work across London and the South East. You can ring 0345 464 0079 or send us an email and tell us what needs doing, and we’ll send you a clear quote.
Does someone need to be in?
If the work is inside, we need someone to let us in. Once we’ve agreed the job, you do not need to watch us work.
Should I try DIY first?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
Do you hold any approvals?
Yes. We’re approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
Which products do you use?
Each joint gets the product that suits it. Movement, water and weather all affect the choice.
My shower still leaks after a reseal. Can you sort it?
Yes. There’s normally a reason: sealant over sealant, movement or another leak, and we deal with the cause first.
What information do you need?
Where the job is, what the problem is and roughly how big it is. Photos by email help too.
Quotes for remedial sealant in Borden
Jobs vary more than people expect. The main factors:
- Working hours on commercial sites
- The amount of work
- Mould in or behind the old joints
- The number of rooms or windows
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, along with when we can work on site. Ask us for a quote and we will explain what it covers.
Helping us quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- The address or postcode of the job
- Any access issues, like height or stairs
- Roughly how big the job is
- The problem you’ve noticed
For remedial sealant in Borden, call 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
Why it’s worth doing now in Borden
Another bead over the top will not fix a failed joint. It doesn’t grip the old layer, so the leak carries on and there’s now more to remove. Where a wall is exposed, as many are in small places like Borden, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Combining jobs into one visit is usually more efficient than separate visits. You’ll get one clear quote for the whole job.
What you get with us
- Tidy, careful work
- We agree the colour with you first
- Anti-fungal silicone where joints get wet
- Experience in homes, commercial sites and hotels
Read our cost guide or customer reviews.
Keeping the joints in good condition
Looking after new joints is easy, and it makes a real difference:
- Get the cause of a repeat leak found before resealing
- Run the fan after every shower
- Do not add new sealant on top of old
- Do not point over movement joints
Leave the new joint to cure fully before it gets wet or moves: follow the cure time we give you.
Leaks through failed sealant grow over time. Every shower or downpour sends more water through, into whatever is behind or below. Sorting it early limits the damage.
For landlords and businesses
We regularly work with letting and managing agents. Tell us the address, the job and how access works and we will quote.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. We can quote for more than one property at once.
How it works
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. For most jobs that takes a few hours, depending on how many layers have to come out, and the area is left clean. In a small place like Borden, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by checking the joint for movement, leaks and the reason it failed.
- All the old sealant comes out, including any layers underneath.
- The joint is cleaned, treated for mould and left to dry.
- We use the right backing and sealant for any joint that moves.
- The new joint is tooled neatly and we explain anything else we found.
Before we arrive
- Mention if the joints have been sealed before
- Keep pets and children clear of the area while we work
- Mention any parking rules near the property
Get a quote
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll explain how we’d tackle it. When it suits you, ring 0345 464 0079 or send us an email.
Read more
Can I do it myself?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Also near Borden
What else we do in Borden
Borden homes and their sealant
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Homes close to Church of St Peter include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. If you let a flat or house near Liss station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Borden is about 5 miles east of Petersfield, in Hampshire. Across the GU30 area, we can carry out remedial sealant at your property. We cover 683 towns and villages across Hampshire, large and small. There’s also a page for Portsmouth, roughly 18 miles from Borden.
All of GU30 is within our area for remedial sealant. Nearby, we also carry out remedial sealant in Trotton Marsh (1 mile east), Rogate (1 mile south-west), Chithurst (1 mile south-east), Milland (2 miles north-east) and Rake (2 miles north-west). Within a short drive, we also cover Havant (13 miles south-west), Horndean (11 miles south-west), Alton (11 miles north-west), Waterlooville (13 miles south-west), Petersfield (5 miles west) and Purbrook (14 miles south-west).
Around Borden
Borden’s nearest station is Liss station, about 3.6 miles north-west of the centre. Well-known places in the area include Midhurst Community Hospital (4.1 miles south-east). The countryside around Borden includes Wheeler's Down and Iping and Stedham Commons.