Hampshire · England

Remedial sealant & repairs in Blashford, Hampshire

Remedial sealant for Blashford and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.

  • Mould trapped under a layer of silicone
  • Torn expansion joints
  • Repeat leaks from the same joint

Remedial sealant for Blashford homes and businesses

FAQs for Blashford

Will you come out to Blashford?

Yes. Blashford is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.

Is Blashford in your area for remedial sealant?

Yes, Blashford is within the area we cover. We work across London and the South East. You can call 0345 464 0079 or drop us an email and let us know what needs doing.

What do you put in the joint?

It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.

Do you take out the old sealant first?

Yes. All of the old material is cut out and the joint cleaned before applying anything new.

What happens if the problem is the tray or the plumbing?

In that case, we tell you what we have found. You may need a plumber or bathroom fitter before any new sealant goes on.

Do you work for letting agents?

Yes. Domestic, commercial and hotel work are all part of what we do, and we are fully insured.

Does someone need to be in?

That depends on where the joints are. For work indoors, someone needs to let us in, and for outside work we will agree access with you when we book.

Can tenants book the work?

Yes. Check with your landlord; we can send the quote to them too.

About our remedial sealant in Blashford

Movement and expansion joints fail when the sealant can’t stretch. We cut out the failed sealant and set the depth with backing, then a flexible sealant matched to the movement goes in. We’re often asked to deal with wide, uneven beads that look worse than the old ones and repeat leaks from the same joint, across botched or over-sealed joints, mouldy bath & shower sealant and shrunken worktop sealant.

Around Blashford, it’s houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.

Each job carries a 12-month guarantee, whatever its size.

Sealant gun being used along the bath-to-tile joint in a beige tiled bathroom
Location
Blashford (BH24)
Wider area
Hampshire
Cover
12 months on all our work
Quote
Quoted before any work starts
Call
0345 464 0079
Updated
26 October 2026

Work for landlords, hotels and businesses

We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements.

Landlords and letting agents in Blashford can book us as well as homeowners. Resealing between tenancies keeps a property looking cared for before the next move-in.

What sealant work can’t fix

We’d rather tell you now than do work that won’t last, so here’s what sealant can’t put right:

  • A leaking trap, valve or supply pipe
  • Tiles that have come away from the wall
  • Cracks in the fitting rather than the joint

If in doubt, call 0345 464 0079 or drop us an email and we will say what we think.

Where we work in Blashford

  • Shrunken worktop sealant
  • Leaking tray & enclosure joints
  • Mouldy bath & shower sealant
  • Expansion joints
  • Failed movement joints
  • Botched or over-sealed joints

What we do, step by step

There is not much for you to do on the day. Show us the job and we will take it from there. The work itself takes a few hours for most joints, depending on how much old sealant has to come out, including the tidy-up. For a village or hamlet like Blashford, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.

  1. First we work out whether the problem is the sealant, movement or a leak.
  2. Old beads and residue are removed down to clean surfaces.
  3. We treat any mould and dry the joint thoroughly.
  4. The right product goes in, with backing where the joint moves.
  5. The joint is tooled and you’re told about anything else we found.

How to prepare

  • Tell us about any previous sealing or DIY attempts
  • Let us know about stairs, lifts or work at height
  • Clear items away from the joints we are working on

How to get a quote

Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. Whenever you are ready, ring 0345 464 0079 or email us.

Get a quick quote

Read more

Why act early in Blashford

It’s easy to scratch acrylic, enamel or an uPVC frame cutting out old sealant, and the residue left behind stops the next bead bonding. Careful stripping is where most of our time goes. In a small place like Blashford, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.

Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all make a difference, and we’ll explain the quote if you ask.

Why us?

  • Tidy, careful work
  • 12-month guarantee on every job
  • 20+ years of sealant experience
  • Sanitary silicone with an anti-fungal additive in wet areas

See what affects the cost and what customers say.

Common problems we fix in Blashford

Water from somewhere else can ruin a good seal. A slow leak behind the tiles soaks the joint from the back, so the silicone goes mouldy or lets go.

Most people get in touch after spotting something like this:

  • Black mould underneath the bead
  • Wide, uneven beads that look worse than the old ones
  • Gaps opening along the back of the worktop
  • Over-sealed joints coming away

For an older house near a landmark such as Church of St Mary and All Saints, timber floors under older bathrooms flex, so joints need a sealant that moves with them.

What your quote should include

  • Whether the sealant suits the joint
  • What the cure time is
  • Who does the work, and how experienced they are
  • How the joint is cleaned and prepared

Our hiring checklist

Surface by surface

Leaking trays & enclosures

Repeat shower leaks often come from a tray that flexes or an enclosure sealed in the wrong place. Both are checked before any new sealant goes on.

Worktops & kitchens

Shrunken worktop sealant leaves a gap that lets water into the back edge. It’s cut out, degreased and resealed in a colour to suit.

Keeping the joints in good condition

After the cure time, these simple habits help:

  • Do not add new sealant on top of old
  • Have loose fittings fixed before resealing
  • Do not point over movement joints
  • Keep the room well ventilated

Give the new sealant its full cure time: follow the cure time we give you.

If a joint has failed more than once, stop resealing it. Get the cause found first, otherwise the next attempt will fail too.

Remedial sealant around Blashford

Blashford has hotels and guest accommodation nearby. Hotel bathrooms are part of our work as well as homes, and can be done room by room. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.

If you look after a building such as Poulner Junior School, we reseal washrooms and kitchens in schools and businesses as well as homes.

Blashford is in Hampshire. Homes, rented property, offices and hotels in Blashford can book us for remedial sealant, old or new, large or small. The work is guaranteed for a year. Across Hampshire, we cover 683 places, and Blashford is one of them. Our Southampton page covers work nearby.

Work in BH24 works the same way as everywhere else we cover. Whether your property is on Snails Lane, Ivy Lane and Woolmer Lane or a nearby road, we can help. If you are just outside Blashford, we cover Ellingham (1 mile north-west), Rockford (1 mile north-east), Poulner (1 mile south-east), Highwood (1 mile east) and Ringwood (1 mile south). Larger places within reach include Totton (13 miles east), Lymington (13 miles south-east), New Milton (9 miles south-east), Barton on Sea (10 miles south-east), Marchwood (15 miles east) and Ashley (9 miles south-east).

What’s near Blashford

In Blashford, that means homes and buildings near Alice Lisle Inn and Ringwood School Academy, among other places. A little further out are St Leonard's Hospital (4.5 miles south-west). Not far away are Blashford Lakes and Linbrook Lake.

Map of Blashford © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job