Hampshire · England
Floor & skirting joints in Blashford, Hampshire
Floor joint sealing in Blashford from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Open gaps along the bottom of skirting boards
- Concrete floor joints that have broken down
- Tiled floors with no room to move
About our floor joint sealing in Blashford
Gaps along the bottom of skirting are common in new and older homes alike. Caulk tends to crack there, so we close it with a flexible sealant instead. We work on concrete floor joints, commercial floors and thresholds, and common reasons people get in touch are cracked grout where a tiled floor needs a movement joint and failed joint filler in concrete floors.
In a village or hamlet like Blashford, new homes are more likely to be a barn conversion or a handful of houses than a big estate. Each still needs its sealant and floor joints finished properly.
A 12-month guarantee comes as standard.
- Location
- Blashford (BH24)
- Region
- Hampshire
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
New homes and floors in Blashford
Across Hampshire, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. That’s why the skirting and threshold joints need a flexible seal.
If you look after a building such as Poulner Junior School, floor and threshold joints in busy corridors wear quickly and are best resealed early.
Blashford is in Hampshire. Jobs in Blashford get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Our area takes in 683 places across Hampshire. You can also see our page for Southampton, about 17 miles away.
Every address in BH24 is within our area for floor joint sealing, from the main roads to the quietest streets. You will find streets such as Snails Lane, Ivy Lane and Woolmer Lane. If you are just outside Blashford, we cover Ellingham (1 mile north-west), Rockford (1 mile north-east), Poulner (1 mile south-east), Highwood (1 mile east) and Ringwood (1 mile south). Larger places within reach include Totton (13 miles east), Lymington (13 miles south-east), New Milton (9 miles south-east), Barton on Sea (10 miles south-east), Marchwood (15 miles east) and Ashley (9 miles south-east).
Near you in Blashford
We work in homes and buildings around Alice Lisle Inn and Ringwood School Academy, among other places. Well-known places in the area include St Leonard's Hospital (4.5 miles south-west). For a walk, there’s Blashford Lakes and Linbrook Lake.
What the job involves on each surface
Concrete floor joints
Hard wheels break down the edges of open joints. A sealed joint protects the edges and stops debris collecting.
Thresholds
Thresholds between rooms meet two floors and often a door frame. A flexible sealant suits both floor finishes.
When it is not the sealant
We’d rather tell you now than do work that won’t last, so these are the limits:
- Concrete repairs beyond the joint
- Leaks from a failed tanking system
- Movement too big for a sealant joint
If you’re not sure, just phone 0345 464 0079 or send us an email and we’ll give you a straight answer.
What we seal
- Commercial floors
- Concrete floor joints
- Skirting boards
- Wet room & bathroom floors
- Thresholds
- Tiled floors
Landlord and commercial work in Blashford
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
More services for Blashford
Blashford questions
Will you come out to Blashford?
Yes. Blashford is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is Blashford in your area for floor joint sealing?
Yes, Blashford is within the area we cover. Our work covers London and the South East. You can ring 0345 464 0079 or email us and tell us what needs doing.
Can you seal over the old sealant?
No. Fresh sealant doesn’t stick to old sealant, and it traps any mould or water underneath. It all has to come out first.
How long will you be here?
Typically it takes a few hours, depending on the length of joint. Bigger jobs take longer.
What does floor joint sealing cost?
We do not publish prices, because the cost depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
Do you work on commercial floors?
Yes. Concrete floor joints in warehouses and units are part of our work. The product is chosen for the traffic the floor takes.
Do you seal kitchen plinths to the floor?
Yes. Floor edges in bathrooms and kitchens get wet at every clean, so we seal them with silicone suited to wet areas.
How long before the joint can take traffic?
Follow the cure time we give you. Feet are normally fine first, then mopping, then heavy wheels in most cases.
Aftercare tips
No joint lasts for ever, but care makes a real difference. A few tips:
- Do not paint over silicone
- Keep heavy wheels off new concrete joints until cured
- Avoid caulk in bathrooms and kitchens
- Use furniture pads near skirting
Do not paint over silicone. If you plan to paint, we will use a paintable product.
In wet areas, an open floor joint lets water reach the subfloor. A sound seal stops that happening.
What happens if it’s left?
Caulk is quick and cheap, but it cracks where the joint moves or gets wet, so the gap reappears. A flexible sealant stretches instead, so the joint stays closed. Where a wall is exposed, as many are in small places like Blashford, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
We don’t show prices on the website, because each job is priced on what it involves. Call for a quick quote.
Why book with us
- You choose the colour before work begins
- A choice of colours where the product allows
- Sanitary silicone with an anti-fungal additive in wet areas
- Tidy, careful work
Read how sealant jobs are priced and our reviews.
How the visit works
On the day, we start by going over the job with you, so you know exactly what we are doing. Surfaces next to the work are protected before any work begins. The work generally takes a few hours, depending on the length of joint. In a small place like Blashford, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First, the floor type, the gap and the traffic are checked.
- Any old caulk, grout or sealant is raked or cut out.
- We vacuum out the joint and add backing where the depth needs setting.
- The chosen sealant goes in, coloured to suit the floor.
- We tool it neatly and tell you when it can be walked on and cleaned.
Preparing for the visit
- Keep children and pets away from the work area
- Let us know about stairs, lifts or work at height
- Mention any parking rules near the property
Get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and email pictures if that’s easy.
Read more
Do you need floor joint sealing in Blashford?
Timber floors and skirting shrink and swell through the year. In winter, with the heating on, timber dries and gaps open, then close again in damper months.
Common reasons people contact us include:
- Cracked grout where a tiled floor needs a movement joint
- Failed joint filler in concrete floors
- Perimeter joints in tiled floors filled with grout
- Caulk that has cracked where the floor moves
If you look after a church, hall or community building such as Church of St Mary and All Saints, joints in its floors, skirtings and thresholds need resealing as they wear.
What your quote should include
- Whether VAT is included
- How the surfaces are prepared before sealing
- Which colour the sealant will be
- How long to leave it before use