Orkney Islands · Scotland
Remedial Sealant in Bimbister
Remedial sealant for Bimbister, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Wide, uneven beads that look worse than the old ones
- Over-sealed joints coming away
- Repeat leaks from the same joint
Remedial sealant for homes and businesses in Bimbister
A joint that keeps letting you down needs more than another bead. It helps to have photos when you email us at info@mrmastic.co.uk, along with when it was last resealed. Typical jobs include sealant that came away because the surface wasn’t prepared and mould trapped under a layer of silicone, across failed movement joints, expansion joints and leaking tray & enclosure joints.
A bathroom in a place like Bimbister gets the same daily wear as one in a city flat. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.
A one-year guarantee comes as standard, so you are not left on your own once the job is done.
- Place
- Bimbister (KW17)
- Wider area
- Orkney Islands
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Should I try it myself first?
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
What else we do in Bimbister
Work for landlords, hotels and businesses
Housing providers, facilities teams and property managers book us too. Several sites can go on one quote.
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
Signs you need remedial sealant in Bimbister
Some joints fail because water is reaching them from behind. A leaking valve, a failed waste or cracked grout feeds water behind the bead, so the silicone goes mouldy or lets go.
Any of these means the joints need attention:
- Mould trapped under a layer of silicone
- Worktop sealant that has shrunk and split
- Movement joints that have split or pulled away
- Repeat leaks from the same joint
Around Bimbister, as everywhere, remedial sealant is only as good as the preparation behind it.
What your quote should include
- How the colour is chosen
- Is the old sealant removed completely?
- Whether they’re fully insured
- What the quote includes, VAT included or not
When something else is needed
We won’t take on work that won’t last, so here’s what sealant cannot put right:
- Older mastics that may need an asbestos check before removal
- Tiles that have come away from the wall
- A bath, tray or worktop that moves until it’s properly fixed
If in doubt, email us at info@mrmastic.co.uk and we’ll say what we think before booking.
What we seal
- Botched or over-sealed joints
- Failed movement joints
- Expansion joints
- Mouldy bath & shower sealant
- Shrunken worktop sealant
- Leaking tray & enclosure joints
The process
The work is kept neat and contained to the joints we are treating, so you can get on with your day. The job normally takes a few hours, depending on how many layers have to come out. Somewhere like Bimbister may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- First we work out whether the problem is the sealant, movement or a leak.
- Each layer is cut out and the residue cleaned off.
- We treat any mould and dry the joint thoroughly.
- We reseal with a product suited to the joint, backed where needed.
- We finish neatly and point out anything that needs another trade.
Getting ready for the visit
- Try not to wet indoor joints just before the visit
- Clear items away from the joints we’re working on
- Tell us if parking is tricky
Ask for a quote
If you’re in Bimbister and need remedial sealant, send an email to info@mrmastic.co.uk. Tell us what the problem is and where, and we will agree the price before any work begins.
Related advice
Remedial sealant around Bimbister
Bimbister is within about 2 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that does not dry out.
If you live in an older home near Grimeston Congregational Chapel, older homes can move a little, which is hard on rigid grout and tired sealant.
Bimbister is about 9 miles west of Kirkwall, in the Orkney Islands. Anywhere in KW17, we cover remedial sealant for homes and businesses. Across the Orkney Islands, we cover 51 places, Bimbister among them.
Here we cover the KW17 postcode area for remedial sealant. Neighbouring places we cover for remedial sealant include Harray (1 mile north), Grimeston (1 mile south-west), Russland (2 miles north-west), Hourston (2 miles north-west) and Wasbister (3 miles west). If you’re somewhere remote, a little more planning is needed, so let us know when you get in touch.
Around Bimbister
Other landmarks nearby include Corrigall Farm Museum (1.9 miles north). For a walk, there’s Brodgar RSPB Reserve and Ward of Redland.
FAQs for Bimbister
Is Bimbister in your area for remedial sealant?
Yes, Bimbister is within the area we cover. Our work covers the whole of Scotland. Just drop us a line at info@mrmastic.co.uk with a few details of the job, and we will send you a clear quote.
Is Bimbister within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland, including the islands, where work is planned around ferry crossings. Just mention lanes, gates or anything else about the route when you book.
Someone sealed over the old bead. Can you fix it?
Yes. Both layers come out; new silicone doesn’t bond to old silicone, which is why over-sealing fails.
Are you an approved applicator?
Yes. We are approved under the ARBOMaster scheme.
Does someone need to be in?
It depends on the job. For work indoors, someone needs to let us in.
Where do you work from?
We’re based in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
What should I tell you?
Tell us what needs doing and where, plus photos if you have them. We will ask anything else we need to know.
Which products do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
What affects the quote in Bimbister
You will get a clear quote before we start. It’s based on:
- Whether old sealant or filler has to be cut out
- Whether there’s mould to deal with
- The number and length of the joints
- The product the joint needs
We don’t show prices on the website, because each job is priced on what it involves. Call for a quick quote.
Asking for a quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- Where the job is, and your postcode
- A few pictures by email, if you can
- The rough size of the job
- If it’s domestic, commercial or a hotel
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
Looking after it afterwards
Simple care keeps the joints in good condition. Our advice:
- Use a soft cloth, not a scourer, on silicone
- Don’t add new sealant on top of old
- Ask why a joint failed before redoing it
- Keep an eye on the ceiling below the bathroom
If we’ve found a cause, such as a loose tray or a leaking waste, get it fixed, because the new sealant can’t hold back a problem underneath.
Leaks through failed sealant grow over time. Each use pushes more water behind the bead, into floors, walls or ceilings. Early action keeps it to a sealant job.