West Sussex · England
Billingshurst Remedial Sealant
Professional remedial sealant in and around Billingshurst, with every bit of old sealant taken out first and a 12-month guarantee.
- Over-sealed joints coming away
- Products that weren’t meant for the joint
- Mould trapped under a layer of silicone
Remedial sealant in Billingshurst, done properly
Remedial work is what we do when sealant has failed or been done badly. Silicone laid over silicone, smears across tiles, the wrong product in a moving joint or mould trapped underneath all need stripping out. If you’re dealing with mould trapped under a layer of silicone and leaks that keep coming back after resealing, we can put it right, on shrunken worktop sealant, leaking tray & enclosure joints and failed movement joints alike.
In a smaller place like Billingshurst, homes are mostly houses and bungalows rather than flats, some older and some much newer. Sealant and grout wear out here just as they do in a big town.
The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we will put it right.
- Where
- Billingshurst (RH14)
- Wider area
- West Sussex
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Bathrooms and kitchens in Billingshurst
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
If you live in an older home near Billingshurst Unitarian Chapel, walls and floors in older homes can move, and sealant and grout show it first. If you let a flat or house near Billingshurst station, a joint that keeps failing is best fixed properly while the property is empty.
Billingshurst is about 6 miles south-west of Horsham, in West Sussex. Across the RH14 area, we cover remedial sealant for homes and businesses. Billingshurst is one of 371 places in West Sussex we cover. There’s also a page for Crawley, roughly 13 miles from Billingshurst.
We cover every part of the RH14 postcode area for remedial sealant and the streets around it. You’ll find streets such as High Street, Station Road and Lower Station Road, all of which we cover. Nearby, we also carry out remedial sealant in Coneyhurst (2 miles south-east), Newpound Common (2 miles north-west), Five Oaks (2 miles north-east), The Haven (3 miles north) and Slinfold (4 miles north-east). Further out, we also cover Crawley (13 miles north-east), Horsham (6 miles north-east), Worthing (14 miles south), Haywards Heath (15 miles east), Burgess Hill (15 miles east) and Littlehampton (15 miles south).
Near you in Billingshurst
We work in homes and buildings around The Railway Inn and The Weald School and the streets around them. Billingshurst has its own railway station: Billingshurst station. Not far away are The Mens.
Towns and villages near Billingshurst
What else we do in Billingshurst
Why deal with it now?
Leaks that are left keep doing damage out of sight: wet floors, stained ceilings and swollen worktops. By comparison, sorting the joint is quick. Homes in smaller places like Billingshurst can face more weather, and failed outside joints let damp into walls. Indoors, a failed seal lets water into floors and panels as it would anywhere.
What you pay reflects the work, not guesswork. That’s why we ask a few questions first.
Why Billingshurst clients choose us
- Tidy, careful work
- Trusted Arbo and Everbuild sealants
- Colour picked to suit the job
- Anti-fungal silicone where joints get wet
See how sealant jobs are priced and our reviews.
When it is not the sealant
Some problems need a builder, plumber or other trade rather than us:
- Water damage behind tiles that needs a tiler
- Sealant in an older building that needs testing for asbestos first
- Movement from fittings that aren’t supported
If you’re not sure, just ring 0345 464 0079 or email us and we’ll give you a straight answer.
Where we work in Billingshurst
- Expansion joints
- Botched or over-sealed joints
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Failed movement joints
- Mouldy bath & shower sealant
What we do, step by step
We keep the work tidy and contained to the area we’re working on, so you can get on with your day. Expect the work to take a few hours, depending on how many layers have to come out, and we explain the cure time before we leave. A visit to Billingshurst is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- We start by checking the joint for movement, leaks and the reason it failed.
- We strip the joint completely, removing any layers below.
- We clean the joint, treat any mould and let it dry.
- Moving joints get backing and a flexible sealant to suit.
- Finally we finish the joint and talk you through what we found.
Preparing for the visit
- Tell us if parking is tricky
- Try not to wet indoor joints just before the visit
- Clear items away from the joints we’re working on
Ask for a quote
Asking for a quote is easy: tell us what needs doing and where, and roughly how big it is. A few pictures by email make the job easier to understand, and we will take it from there.
Related advice
When to call us in Billingshurst
Some joints fail because water is reaching them from behind. A slow leak behind the tiles soaks the joint from the back, and the sealant lifts or goes mouldy from underneath.
Keep an eye out for any of the following:
- Sealant peeling off a dusty or damp surface
- Movement joints that have split or pulled away
- Wide, uneven beads that look worse than the old ones
- Repeat leaks from the same joint
If you look after a building such as Billingshurst Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Comparing quotes
- What insurance they hold
- Is the old sealant removed completely?
- Whether VAT is included
- What product goes in the joint
Billingshurst: your questions answered
Can you help a landlord with a rental near Billingshurst station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can phone 0345 464 0079 or email us with the details for a clear quote.
Is Billingshurst in your area for remedial sealant?
Yes. Our work covers London and the South East, and Billingshurst is part of that. You can ring 0345 464 0079 or send us an email and tell us what needs doing.
Is it messy?
No. We work neatly, protect the area around the joints and tidy up afterwards.
Will the old sealant be removed?
Yes, every time. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.
Where is Mr Mastic based?
Mr Mastic is based in Crawley. Our applicators cover Billingshurst.
Can you work on commercial sites?
Yes. Commercial and hotel work is a large part of what we do, as well as homes. Working times can be discussed when we quote.
Can I choose the sealant colour?
Most of the time, yes. We will tell you which colours the right product comes in and agree one before work begins.
How long will it take to strip and reseal the joint?
A little longer than a standard reseal. Most jobs take a few hours.
Different surfaces, different methods
Mouldy bath & shower sealant
Black mould inside the bead won’t scrub out. The sealant is cut out completely, the joint treated with a mould remover and dried ahead of a new anti-fungal bead.
Windows & doors
Wrong-coloured or messy mastic can be replaced for appearance too, matched to the frame colour.
For landlords and businesses
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a one-year guarantee.
Letting agents and landlords in Billingshurst can book us as well as householders. Sealant work between tenants keeps a property looking cared for.
What affects the cost of remedial sealant
The price is agreed before any work begins. It takes into account:
- How many rooms, windows or areas are involved
- Any mould that needs treating
- Whether old sealant or filler has to be cut out
- The type of sealant required
Homes and businesses are quoted the same way: the amount of work, how we reach it and what it needs. Ask us for a quote and we’ll go through it with you.
Asking for a quote
There’s no need for technical detail. Just tell us:
- A few pictures by email, if you can
- Whether it’s a home or a business
- Where the property is
- What’s wrong with the joints now
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. When it suits you, call 0345 464 0079 or drop us an email.