Hampshire · England
Remedial sealant & repairs in Anmore, Hampshire
Professional remedial sealant in and around Anmore, with old sealant always removed completely and a 12-month guarantee.
- Repeat leaks from the same joint
- Smears and lumps from a botched reseal
- Sealant peeling off a dusty or damp surface
Can I do it myself?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
How we handle remedial sealant in Anmore
Removing failed sealant is the hardest part of the job. We cut out every layer, clear the residue and degrease the surfaces, taking care not to scratch the surfaces around it. New sealant only bonds to a clean, dry joint. If you have sealant peeling off a dusty or damp surface and thick, messy sealant smeared over tiles, we can put it right, on mouldy bath & shower sealant, leaking tray & enclosure joints and expansion joints alike.
Somewhere as small as Anmore, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
Big or small, you get the same one-year guarantee.
- Where
- Anmore (PO7)
- Wider area
- Hampshire
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Towns and villages near Anmore
More services for Anmore
Common questions in Anmore
Do you cover smaller places like Anmore?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you cover Anmore for remedial sealant?
Yes. We work across London and the South East, and Anmore is part of that. Just call 0345 464 0079 or email us with a few details of the job.
How long before the joint can be used?
It depends on the product. We tell you how long to leave it before we go.
Can I do it myself?
That depends on the joint. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
Do you take out the old sealant first?
Yes. We cut out all the old sealant and clean the joint before applying anything new.
Does someone need to be in?
That depends on where the joints are. Inside work needs someone to give us access.
Can you remove sealant that is been put over old sealant?
Yes. It’s slower than a standard reseal, because every layer has to come out cleanly, but it’s the only way the new joint will last.
What sealant do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
What happens if it’s left?
Mould under a bead can’t be reached by cleaning. The layers have to come out, so the joint can be treated and resealed. In a small place like Anmore, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Homes and businesses are quoted the same way: the amount of work, how we reach it and what it needs, plus any working-time requirements on site. Ask us for a quote and we will explain what it covers.
Why us?
- Any old sealant cut out fully, not covered over
- ARBOMaster approved applicator
- 4.9 on Google from 180+ five-star reviews
- Colour agreed with you before any work starts
Surface by surface
Worktops & kitchens
A loose worktop splits its sealant. It needs fixing down first, and we will tell you if we find it.
Windows & doors
Some leaks around windows come from the wall or the window itself. We check the joint and tell you if it looks to be something else.
Remedial sealant in Anmore: local notes
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
If you look after a building such as Denmead Infant School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Anmore is about 1 mile north-west of Waterlooville, in Hampshire. Across the PO7 area, our applicators can take on remedial sealant. Anmore is one of 683 places in Hampshire where we work for remedial sealant. Portsmouth is on our list too, around 7 miles away.
Here we cover the PO7 postcode area for remedial sealant. Streets in the area include Anmore Road and Soake Road. We also cover Wecock Farm (1 mile east), Denmead (1 mile west), Lovedean (1 mile north-east), Horndean (2 miles east) and Anthill Common (2 miles west). Within a short drive, we also cover Gosport (8 miles south-west), Havant (4 miles south-east), Eastleigh (14 miles west), Fareham (7 miles south-west), Hedge End (11 miles west) and Petersfield (9 miles north-east).
What’s near Anmore
In Anmore, that means homes and buildings near The Cowplain School and The Mead End pub. Anmore’s nearest station is Bedhampton station, about 4 miles south-east of the centre. Well-known places in the area include Queen Alexandra Hospital (3.6 miles south) and Clanfield Earthwork (4.3 miles north-east). Not far away are St Clair's Meadow and Windmill Hill.
The process
All our tools and materials come with us in the van, so you do not need to buy or prepare anything. Once we’ve agreed what’s being done, we protect the area and start. It normally takes a few hours for a typical bath or shower, longer where several layers have been applied. In a small place like Anmore, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First we work out whether the problem is the sealant, movement or a leak.
- Each layer is cut out and the residue cleaned off.
- Mould is treated and the joint dried.
- We reseal with a product suited to the joint, backed where needed.
- The joint is tooled and you’re told about anything else we found.
Before we arrive
- For indoor joints, keep the area dry beforehand if you can
- Mention any tricky access
- Plan for the work area to be out of bounds to pets and children
Ask for a quote
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. A few pictures by email make the job easier to understand, and we’ll come back to you with a quote.
Advice
Common problems we fix in Anmore
Water from somewhere else can ruin a good seal. A leaking valve, a failed waste or cracked grout feeds water behind the bead, and the sealant lifts or goes mouldy from underneath.
Most people get in touch when they notice one of these:
- Torn expansion joints
- Sealant that came away because the surface wasn’t prepared
- Leaks that keep coming back after resealing
- Black mould underneath the bead
For landlords with property near Bedhampton station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Comparing quotes
- When the joint can take water or movement
- Which colour the sealant will be
- How much experience the applicator has
- How the surfaces are prepared before sealing
How to look after the new joints
Good habits help new joints last longer. A few tips:
- Do not add new sealant on top of old
- Do not point over movement joints
- Report a tray that rocks or a worktop that lifts
- Check ceilings under showers for marks
Go easy on the new sealant: no scraping, scouring pads or harsh chemicals.
Leaks through failed sealant grow over time. Every shower or downpour sends more water through, into whatever is behind or below. Sorting it early limits the damage.
Honest limits
New sealant cannot fix everything, and we will tell you before we start. Sealant won’t put right:
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Cracks in the fitting rather than the joint
- Movement from fittings that are not supported
Not sure which it is? You can phone 0345 464 0079 or send us an email and we’ll tell you honestly before you book.
Where we work in Anmore
- Botched or over-sealed joints
- Failed movement joints
- Leaking tray & enclosure joints
- Expansion joints
- Shrunken worktop sealant
- Mouldy bath & shower sealant