Buckinghamshire · England
Regrouting in Wycombe Marsh
We cover Wycombe Marsh for raking out old, cracked or stained grout and regrouting tiled walls and floors. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Cracked grout along the bath or tray
- Splashback grout that has darkened
- Discoloured grout on otherwise sound tiles
Aftercare tips
To keep the joints looking good and working properly:
- Use a soft brush rather than a wire one
- Avoid neat bleach and strong acid descalers on grout
- Check the corner silicone every few months
- Run the extractor fan during and after a shower
Check the corner silicone now and then. It’s the part that moves, so the sealant there will need renewing in time.
Leaving failed grout can mean tiles come loose. Once that happens, regrouting won’t fix it so early action pays.
Regrouting in Wycombe Marsh
Grout is the filler between your tiles, and sealant is what goes along the bath, tray or worktop. When grout cracks or washes out, water can get in behind the tiles. We rake it out and replace it, then reseal the corners and edges. If you are dealing with floor grout that has worn and darkened and crumbling grout between the tiles, we can help.
Around Wycombe Marsh, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
Big or small, you get the same one-year guarantee in Wycombe Marsh and across Buckinghamshire.
- Place
- Wycombe Marsh (HP11, HP13, HP10)
- Wider area
- Buckinghamshire
- Guarantee
- 12 months on all our work
- Price
- A clear price before we start
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Wycombe Marsh: your questions answered
Do you cover smaller places like Wycombe Marsh?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you help a landlord with a rental near High Wycombe station?
Yes, we work for letting agents and landlords. You can phone 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before work begins.
Where is Mr Mastic based?
Our base is in Crawley, and we work across South East England, London and Scotland.
Are you an approved applicator?
Yes. We’re an ARBOMaster approved applicator, which is run for the Arbo sealant brand.
Can you quote for more than one area?
Yes, and it often makes sense. Doing several areas at once is usually more efficient, so mention them when you ask for a quote.
Do you guarantee regrouting?
Our one-year guarantee applies to all our work. We’re also fully insured.
Do I need to be at home?
It depends on the job. For work indoors, someone needs to let us in, and for outside work we will agree access with you when we book.
Do you reseal at the same time?
Yes, in most cases. Fresh grout next to old, mouldy silicone would look odd and wouldn’t keep water out.
Surface by surface
Kitchen splashbacks
A splashback can be regrouted without touching the worktop. The joint along the worktop is resealed with silicone.
Bathroom wall tiles
Tiles away from the shower stay drier but still stain and crack. New grout freshens them up.
Bathrooms and kitchens in Wycombe Marsh
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near High Wycombe station, clean grout and fresh sealant between tenancies make a bathroom look cared for again. Homes close to Church of St Anne include some older properties, and walls and floors in older homes can move, and sealant and grout show it first.
Wycombe Marsh is about 1 mile south-east of High Wycombe, in Buckinghamshire. Wherever you are in the HP11 postcode area, our applicators can take on regrouting. Wycombe Marsh is one of 263 towns and villages in Buckinghamshire we cover for regrouting. For nearby work, see our Reading page.
Every address in HP11, HP13 and HP10 is covered for regrouting. That includes homes and businesses on Beech Road, Portland Road and Abbey Barn Road. Other places close to Wycombe Marsh include Micklefield (1 mile north), Totteridge (1 mile north), High Wycombe (1 mile north-west), Terriers (2 miles north) and Tylers Green (2 miles north-east). Further out, we also cover Aylesbury (14 miles north), Chesham (8 miles north-east), Marlow (4 miles south-west), Amersham (7 miles north-east), Beaconsfield (3 miles east) and Chalfont St Peter (7 miles east).
Landmarks near Wycombe Marsh
We work in homes and buildings around The Pheasant pub and Highcrest Academy. The nearest railway station is High Wycombe station, about 1.3 miles north-west. Well-known places in the area include Hospital of St John the Baptist (1.2 miles north-west) and Chiltern Sound Phonograph Museum (3.8 miles south-west). Not far away are Gomm's Wood.
Towns and villages near Wycombe Marsh
Also in Wycombe Marsh
How we quote for regrouting
Some jobs are bigger than they look, and some smaller. What affects the quote:
- The product the joint needs
- The old material and how stubborn it is
- The number and length of the joints
- The number of rooms or windows
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
What to tell us for a quote
There’s no need for technical detail. It helps if you can tell us:
- Where the job is, and your postcode
- If someone has resealed it before
- If it’s domestic, commercial or a hotel
- A few pictures by email, if you can
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. When it suits you, phone 0345 464 0079 or email us.
What we do, step by step
At the end, we look at the finished work together. The work normally takes anything from a few hours to a full day, depending on the area, depending on how much there is to do. Somewhere as small as Wycombe Marsh, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- Every tile area is checked for hollow or loose tiles first.
- We rake out the grout evenly, protecting the tile edges.
- We vacuum the joints so the new grout bonds.
- New grout is pressed into the joints and the tiles are cleaned.
- We finish with silicone in the moving joints.
How to prepare
- Clear the area around the work
- For indoor joints, keep the area dry beforehand if you can
- Let us know about stairs, lifts or work at height
Get a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.
Read more
Landlords, agents and businesses in Wycombe Marsh
We regularly work with letting and managing agents. Tell us the address, the job and how access works and we will give you a quote.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
Signs you need regrouting in Wycombe Marsh
Poor ventilation keeps grout damp, and damp grout is where mould grows. When black spots keep returning, the mould has generally got into the grout.
Look out for any of the following:
- Old grout in a dated colour
- Cracked grout along the bath or tray
- Grout washed out of a shower
- Good tiles let down by tired grout
For site and facilities teams at buildings such as Marsh School, we reseal washrooms and kitchens in schools and businesses as well as homes.
What your quote should include
- Whether they seal over old material or remove it
- When the joint can take water or movement
- Whether the sealant suits the joint
- Are they insured?
DIY sealant or a professional job?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.