Buckinghamshire · England
Micklefield Regrouting
Specialist regrouting for Micklefield: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Cracked or crumbling grout lines
- Stained grout that cleaning will not shift
- Splashback grout that has darkened
About our regrouting in Micklefield
Across Micklefield, we regrout tiled showers, bathrooms and kitchens. Out comes the old grout, the joints are cleaned and new grout goes in, finished with new silicone at the edges. Typical jobs include stained grout that cleaning won’t shift and cracked or crumbling grout lines, across kitchen splashbacks, shower walls and bathroom wall tiles.
In a smaller place like Micklefield, homes are mostly houses and bungalows rather than flats, some older and some much newer. Sealant and grout wear out here just as they do in a big town.
Our work is backed for twelve months.
- Where
- Micklefield (HP13, HP10, HP11)
- Wider area
- Buckinghamshire
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Work for landlords, hotels and businesses
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements.
Regrouting around Micklefield
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
Letting a property close to High Wycombe station? Then stained grout drags a rental down, and regrouting between lets puts that right. Homes close to St Andrew's Church include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Micklefield is about 1 mile east of High Wycombe, in Buckinghamshire. From the centre of Micklefield to the outskirts, we cover regrouting for every kind of property, from flats and houses to offices and hotels. Our Buckinghamshire coverage runs to 263 places, and Micklefield is one of them. For nearby work, see our Reading page, about 17 miles away.
We work across the HP13, HP10 and HP11 postcode area for regrouting. Local streets include Cock Lane, Colne Road and Baring Road. Neighbouring places we cover for regrouting include Totteridge (1 mile west), Tylers Green (1 mile north-east), Wycombe Marsh (1 mile south), Terriers (1 mile north-west) and Hazlemere (1 mile north). Larger places within reach include Aylesbury (14 miles north), Chesham (7 miles north-east), Marlow (5 miles south-west), Amersham (6 miles north-east), Beaconsfield (3 miles south-east) and Chalfont St Peter (7 miles east).
Around Micklefield
We work in homes and buildings around The Dolphin Eye pub and Highcrest Academy and the streets around them. For rail, the closest station is High Wycombe station, roughly 1.3 miles west. A little further out are Eden (1.7 miles west) and Hospital of St John the Baptist (1.2 miles west). Green spaces nearby include Gomm's Wood.
Nearby places to Micklefield
Other services in Micklefield
Keeping the joints in good condition
Aftercare is simple, and it makes a real difference:
- Use a soft brush rather than a wire one
- Rinse the tiles after showering
- Get any tile that moves checked promptly
- Use gentle cleaners on grout
Use a gentle cleaner on the grout with a soft brush. Avoid neat bleach and strong acid descalers, as they can break grout down.
Once grout cracks, it tends to get worse. Water gets in behind and the tiles can start to loosen and early regrouting can avoid a much bigger job.
Micklefield questions
Do you work for landlords with property near High Wycombe station?
Yes, we work for landlords and letting agents. You can phone 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before we start.
Is Micklefield in your area for regrouting?
Yes. Our work covers London and the South East, and Micklefield is part of that. Just ring 0345 464 0079 or drop us an email with a few details of the job, and we will give you a clear price.
Is it OK to seal over old sealant?
No, and we never do. It may look fine at first, but the new layer lifts away from the old one. The old sealant has to come out completely.
Is it worth trying it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. If it does not work out, we can redo it.
How soon can the shower be used after regrouting?
We give you a time before we leave. It depends on the grout and the sealant used so please stick to it.
Will the sealant be renewed as well as the grout?
Most of the time, yes. Grout and sealant do different jobs, so we renew both and include it in your quote.
What do you need from me for a quote?
The location, the problem and the rough size of the job. Photos by email help too.
How long does the job take?
A typical job takes a few hours for a shower enclosure, longer for a whole room, including the preparation. We will confirm how long when we quote.
Common problems we fix in Micklefield
A poor original job is a common cause. Grout that was too wet, not packed in or cleaned off too hard tends to wash out early.
Signs it’s time to call us include:
- A grout colour that no longer suits the room
- Cracked grout along the bath or tray
- Greasy, stained grout behind the hob
- Floor grout that has worn and darkened
For site and facilities teams at buildings such as Kings Wood School and Nursery, we reseal washrooms and kitchens in schools and businesses as well as homes.
Before booking anyone
- How long to leave it before use
- What preparation is included
- How the colour is chosen
- What the quote includes, VAT included or not
What happens on the day
Most of a good job is in the preparation, and we don’t rush it. Joints are cleaned back and dried before anything new goes in. All told, the work takes anything from a few hours to a full day, depending on the area. For a job in Micklefield, we agree the time, the access and parking before the day. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- First, we check for loose or hollow tiles and point out any we find.
- We rake out the old grout to an even depth, taking care of the tile edges.
- We vacuum the joints and clean out the dust.
- We fill the joints with new grout, then clean the tiles.
- Corners and edges are resealed with flexible silicone, not grout.
Before we arrive
- Let us know about earlier repairs to the joints
- Let us know about stairs, lifts or work at height
- Tell us if parking is tricky
Getting a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.
Advice
Why act early in Micklefield
Regrouting won’t help where tiles have come away. We point that out first, so you can decide what to do. On sound tiles, regrouting avoids the upheaval of a retile. In an older home around Micklefield, damp from a failed joint can get into timber and plaster, which is far harder to put right than the sealant itself.
What you pay reflects the work, not guesswork. That’s why we ask a few questions first and agree the price before starting.
Why book with us
- Full insurance on every job
- Trusted Arbo and Everbuild sealants
- Tidy, careful work
- We never seal over old sealant
Take a look at our cost guide or our reviews.
What affects the quote in Micklefield
Jobs vary more than people expect. What affects the quote:
- The number and length of the joints
- How many areas need sealing
- Any mould that needs treating
- Which sealant suits the joint
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all make a difference, and we will explain the quote if you ask.
Helping us quote
To make quoting easier, please include:
- How we’d reach the joints
- If someone has resealed it before
- What the problem is, such as mould, gaps, leaks or cracking
- The type of property
To get a quote, call 0345 464 0079 or email us with the location and a short description of the problem. We will send you a clear quote before any work starts.
Should I try it myself first?
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.