Oxfordshire · England
Regrouting in Murcott
Our applicators work in Murcott on raking out old, cracked or stained grout and regrouting tiled walls and floors. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Corners filled with grout instead of silicone
- Discoloured grout on otherwise sound tiles
- Greasy, stained grout behind the hob
Regrouting around Murcott
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Letting a property close to Islip station? Then a regrout while the flat is empty is quicker than working around a tenant.
Murcott is about 4 miles south of Bicester, in Oxfordshire. Wherever you are in the OX5 postcode area, we can carry out regrouting at your property. We cover 443 towns and villages across Oxfordshire. You can also see our page for Oxford, roughly 7 miles from Murcott.
Every address in OX5 is covered for regrouting, from the main roads to the quietest streets. We also cover the places around Murcott: Fencott (1 mile north-west), Merton (1 mile north-west), Charlton-on-Otmoor (1 mile west), Upper Arncott (2 miles north-east) and Lower Arncott (2 miles north-east). Further out, we also cover Oxford (7 miles south-west), Bicester (4 miles north), Abingdon-on-Thames (12 miles south-west), Witney (15 miles west), Thame (10 miles south-east) and Kidlington (6 miles west).
Local landmarks in Murcott
The nearest railway station is Islip station, about 3.7 miles west of the centre. Other landmarks nearby include Bicester Community Hospital (4.1 miles north) and Bicester Avenue (3.5 miles north). The countryside around Murcott includes Otmoor RSPB reserve and Graven Hill.
Regrouting in Murcott, done properly
Regrouting is generally paired with resealing. Grout is for the joints between tiles, but internal corners and edges flex, so they’re sealed with silicone rather than grout. Renewing both together means nothing is left half-done. Typical jobs include grout in corners that has cracked and dirty, worn grout on a tiled floor, on bathroom wall tiles, shower walls and kitchen splashbacks.
Around Murcott, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.
Our work is backed for twelve months.
- Location
- Murcott (OX5)
- Wider area
- Oxfordshire
- Guarantee
- A year, on every job
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Work for landlords, hotels and businesses
If you manage several properties in or around Murcott, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs.
Housing providers, facilities teams and property managers book us too in Murcott and across Oxfordshire. We can quote a run of properties together, and we are fully insured for the work.
Keeping the joints in good condition
A little care helps the new joints last. We recommend:
- Use a squeegee on the tiles after showering
- Check the corner silicone every few months
- Have loose tiles looked at early
- Avoid neat bleach and strong acid descalers on grout
Give the new grout the time we tell you before using the shower, so it can harden properly. From then on, a quick rinse after showering helps and keep the room ventilated.
Grout that is washing out of a shower shouldn’t be left. Each shower drives water into the open joints and it can end up in the wall or the ceiling below.
Places near Murcott
What else we do in Murcott
Surface by surface
Wet rooms
Wet room grout and sealant need to be in good order. We renew both.
Corners and edges
We reseal edges at the same time as regrouting, so the whole area is finished together.
Your questions about regrouting in Murcott
Do you cover smaller places like Murcott?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you work for landlords with property near Islip station?
Yes, landlords and agents are among the people we work for. Just ring 0345 464 0079 or send us an email with the address and what needs doing, and we will send you a clear quote.
Is it worth trying it myself?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
Can you work on commercial sites?
Yes, regularly. Larger jobs can be planned room by room or area by area to suit the site.
Is it messy?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.
Where are you based?
We’re a Crawley-based firm. Our area covers South East England, London and Scotland.
Do you hold any approvals?
Yes. We hold ARBOMaster approved applicator status, and we are fully insured.
What does regrouting cost?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. You will get a clear quote before work begins.
How it works
Once we are on site, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. After that, the work takes a few hours, or longer for a fully tiled room. In a small place like Murcott, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We agree the area to be regrouted and point out any loose tiles.
- Grout is raked out without chipping the tiles.
- Dust is cleared from every joint.
- The new grout goes in, then the tile faces are cleaned.
- Internal corners and edges are resealed.
Preparing for the visit
- Tell us about any previous sealing or DIY attempts
- Let us know about parking restrictions
- Let us know if you’ve seen damp or leaks
Get a quote
Every job is quoted individually. Simply phone 0345 464 0079 or email us and describe the job.
Advice
Why deal with it now?
With regrouting, your tiles stay where they are. Retiling means stripping the walls, making good and choosing new tiles, and often a few days without a shower. When the tiles are fine, it’s the sensible first step. Where a wall is exposed, as many are in small places like Murcott, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all make a difference.
Why Murcott clients choose us
- Trusted Arbo and Everbuild sealants
- Neat joints and a tidy finish
- More than 20 years in sealant work
- Old sealant always removed completely
Read what affects the cost and what customers say.
Honest limits
Honest advice matters more to us than a booking, so here’s what sealant cannot fix:
- Water coming from plumbing rather than grout
- A floor or wall that keeps moving
- Loose tiles, which need refixing first
If you are not sure, just ring 0345 464 0079 or email us and we’ll give you a straight answer.
Where we work in Murcott
- Shower walls
- Bathroom floors
- Bathroom wall tiles
- Kitchen splashbacks
- Wet rooms
- Tiled floors
What we’re called out for in Murcott
A poor original job is a common cause. If it was mixed too wet or not pressed in firmly can wash out within a few years.
The most common problems we see are:
- Gaps where the shower grout has gone
- Greasy, stained grout behind the hob
- Floor grout that will not come clean
- Grout in corners that has cracked
In and around Murcott, as anywhere, good regrouting starts with a clean, dry, properly prepared joint.
What your quote should include
- Whether VAT is included
- What product goes in the joint
- Whether all the old sealant comes out first
- Who does the work, and how experienced they are