Oxfordshire · England
Regrouting in Fencott
Specialist regrouting for Fencott: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Crumbling grout between the tiles
- Gaps where the shower grout has gone
- Corners filled with grout instead of silicone
Regrouting in Fencott, done properly
We take the old grout out to a consistent depth, taking care not to chip the tile edges. After vacuuming, new grout goes in and the tiles are wiped clean, with silicone renewed in the corners. If you have good tiles let down by tired grout and stained grout that cleaning won’t shift, we can help, whatever the surface.
Somewhere as small as Fencott, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.
- Where
- Fencott (OX5)
- Wider area
- Oxfordshire
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
How to look after the new joints
Looking after new joints is easy:
- Wipe or squeegee the shower walls
- Keep the fan on after showering
- Have loose tiles looked at early
- Avoid neat bleach and strong acid descalers on grout
Have any tile that moves checked straight away. Movement will crack the new grout and open a path for water.
Stains that will not clean are a sign the grout is breaking down. Regrouting at this stage is straightforward while the tiles are still sound.
Why act early in Fencott
Grout pens and paint-on colourants only cover the surface. They won’t fill gaps or keep water out, and stains can show through again. A proper regrout puts new grout in the joint. Where a wall is exposed, as many are in small places like Fencott, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all play a part.
Why us?
- An ARBOMaster approved applicator
- Fully insured
- Experience in homes, commercial sites and hotels
- We never seal over old sealant
See our cost guide or customer reviews.
Do you need regrouting in Fencott?
Poor ventilation keeps grout damp, giving mould a place to grow. Black marks that come back after cleaning are often in the grout itself.
The problems people generally mention when they call are:
- Good tiles let down by tired grout
- Cracked or crumbling grout lines
- Grout in a colour the owner wants to change
- Shower grout that has worn away
For site and facilities teams at buildings such as Charlton-on-Otmoor Church of England Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Comparing quotes
- Which colour the sealant will be
- What guarantee comes with the work
- When the joint can take water or movement
- Who does the work, and how experienced they are
How the job changes by surface
Bathroom floors
Cracked floor grout can point to movement underneath. We look for loose tiles first.
Kitchen splashbacks
Grout behind the hob and sink works hard. We regroute and reseal the worktop joint.
Work for landlords, hotels and businesses
We also work for property managers and facilities teams in Fencott and across Oxfordshire. We can quote a run of properties together.
Landlords and letting agents in Fencott can book us as well as homeowners. Resealing between tenancies keeps a property looking cared for before the next move-in.
DIY sealant or a professional job?
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
The process
We keep the work tidy and contained to the joints we are treating. Expect the work to take anything from a few hours to a full day, depending on the area, and we tell you how long to leave it before we go. Somewhere as small as Fencott, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First, we check for loose or hollow tiles and point out any we find.
- Old grout is raked out to a consistent depth without chipping the tiles.
- The joints are vacuumed and cleaned.
- We fill the joints with new grout, then clean the tiles.
- We reseal the internal corners and edges with silicone.
How to prepare
- Mention if the joints have been sealed before
- Let us know about stairs, lifts or work at height
- Try not to wet indoor joints just before the visit
Ask for a quote
For a quick quote, get us on the phone, or email us if that’s easier. Describe what needs sealing and we’ll talk you through the work and give you a clear quote.
Read more
Your questions about regrouting in Fencott
Is Fencott within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you work for landlords with property near Islip station?
Yes, landlords and agents are among the people we work for. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
Will the old sealant be removed?
Yes, always, and completely. New silicone doesn’t stick to old silicone, so the joint is cleaned back first.
Can you regrout if a few tiles are loose?
Tiles that have come away need sorting first. We will point them out before any grout comes out.
How long does the job take?
A typical job takes a few hours, or longer for a fully tiled room, including preparation and clearing up. Your quote will say how long we expect yours to take.
Do you grout the corners?
We use silicone in corners and along edges. Grout in a moving joint soon cracks.
Are you fully insured?
Yes. Mr Mastic is fully insured, and we have been doing sealant work for more than 20 years.
Can I add another job to the visit?
Yes. Tell us about everything you’d like done and we will quote it together.
What else we do in Fencott
Regrouting in Fencott: local notes
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For landlords with property near Islip station, stained grout drags a rental down, and regrouting between lets puts that right.
Fencott is about 4 miles south of Bicester, in Oxfordshire. If you need regrouting in Fencott, please ring 0345 464 0079 or drop us an email for a quick quote. We cover Oxfordshire from our Crawley base. Fencott is one of 443 places in Oxfordshire where we work. Oxford is on our list too, about 7 miles from Fencott.
We cover every part of the OX5 postcode area for regrouting and the streets around it. If you’re just outside Fencott, we cover Murcott (1 mile south-east), Charlton-on-Otmoor (1 mile west), Merton (1 mile north), Upper Arncott (2 miles east) and Wendlebury (2 miles north-west). Within a short drive, we also cover Oxford (7 miles south-west), Bicester (4 miles north), Abingdon-on-Thames (12 miles south-west), Witney (14 miles west), Thame (11 miles south-east) and Kidlington (5 miles west).
Near you in Fencott
Typical jobs here are in homes near The Crown pub. The nearest railway station is Islip station, about 3.2 miles west of the centre. A little further out are Bicester Avenue (3.2 miles north) and Bicester Community Hospital (3.8 miles north). Green spaces nearby include Otmoor RSPB reserve and Graven Hill.