Hampshire · England
Mislingford Regrouting
Our applicators work in Mislingford on raking out old, cracked or stained grout and regrouting tiled walls and floors. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Cracked grout along the bath or tray
- Grout washed out of a shower
- Kitchen splashback grout stained by grease
When it isn’t the sealant
To be straight with you, some problems need a different trade:
- Water coming from plumbing rather than grout
- Tiles that are chipped or split
- Tiles that have come away from the wall
If you’re not sure, just ring 0345 464 0079 or send us an email and we will give you a straight answer before booking.
Surfaces we seal
- Shower walls
- Wet rooms
- Tiled floors
- Bathroom floors
- Kitchen splashbacks
- Bathroom wall tiles
About our regrouting in Mislingford
Grout is the filler between your tiles, while sealant goes where tiles meet a bath, tray or worktop. When grout cracks or washes out, water has a way in behind the tiling. Our job is to rake it out and put new grout in, then reseal the corners and edges. If you have floor grout that has worn and darkened and splashback grout that has darkened, we can put it right.
Being in a small place like Mislingford makes no difference to the job itself: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
Big or small, it’s backed by our 12-month guarantee in Mislingford and across Hampshire.
- Where
- Mislingford (PO17)
- Region
- Hampshire
- Cover
- One year on every job
- Quote
- A clear price before we start
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
The process
Before we leave, we go over the finished joints with you and explain the cure time. The visit itself generally takes a few hours for a shower enclosure, longer for a whole room, depending on the amount of work. Somewhere as small as Mislingford, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we agree what’s being done and flag any loose tiles.
- We remove the old grout carefully.
- Dust is cleared from every joint.
- We grout the joints and wipe the tiles clean.
- We renew the silicone at the corners and edges.
Preparing for the visit
- Tell us if parking is tricky
- Tell us about any water getting in
- Keep children and pets away from the work area
How to get a quote
Every job is quoted individually, so start by telling us what you need. Just call 0345 464 0079 or drop us an email with the details, and photos are welcome.
Read more
DIY sealant or a professional job?
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Quotes for regrouting in Mislingford
The quote reflects the job in front of us. We take into account:
- Any mould that needs treating
- The type of sealant required
- The size of the job
- The number of rooms or windows
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you are not sure whether it needs doing, ring 0345 464 0079 or drop us an email and we’ll give you an honest view and a quote.
Helping us quote
When you call or email, it’s useful to know:
- The type of property
- Where the property is
- The rough size of the job
- Photos by email, if that is easy
Getting a quote is simple: tell us what needs doing and where and its rough size. Photos by email help us understand the job, and we will take it from there.
Mislingford homes and their sealant
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you look after a building such as Swanmore College of Technology, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Mislingford is about 5 miles north of Fareham, in Hampshire. Whether you are in the middle of Mislingford or further out, we cover regrouting for every kind of property. We cover 683 towns and villages across Hampshire, from the larger towns to small villages. There’s also a page for Portsmouth, about 9 miles away.
Every address in PO17 is covered for regrouting, from the main roads to the quietest streets. If you’re just outside Mislingford, we cover Kingsmead (1 mile south), Woodend (1 mile south-east), Hill Grove (1 mile north), Shirrell Heath (1 mile west) and Swanmore (1 mile north-west). Within a short drive, we also cover Winchester (11 miles north-west), Gosport (9 miles south), Havant (9 miles south-east), Eastleigh (8 miles west), Fareham (5 miles south) and Horndean (7 miles east).
What’s near Mislingford
Locally, jobs take us to homes and businesses close to The Roebuck pub. The nearest railway station is Botley station, roughly 4 miles west of the centre. Well-known places in the area include Knowle Hospital (3.6 miles south-west) and Bishop's Waltham Museum (2.7 miles north-west). Green spaces nearby include St Clair's Meadow.
Aftercare tips
Good habits help new joints last longer. A few tips:
- Give the walls a quick rinse after use
- Run the extractor fan during and after a shower
- Don’t use strong acidic cleaners on grout
- Have loose tiles looked at early
A squeegee or cloth over the tiles after use keeps water off the grout. Ventilate the room well to help it dry out.
Tiles can come away if failed grout is left. Once that happens, regrouting won’t fix it so early action pays.
When to call us in Mislingford
A bathroom that stays damp keeps the grout wet, and damp grout is where mould grows. When black spots keep returning, the mould has generally got into the grout.
It’s worth asking for a quote if you see:
- Floor grout that will not come clean
- Splashback grout that has darkened
- Grout in corners that has cracked
- Crumbling grout between the tiles
Rented homes near Botley station change hands often, and a regrout while the flat is empty is quicker than working around a tenant.
Questions to ask before you book
- What insurance they hold
- What happens if the job turns out different
- Which colour the sealant will be
- Whether the sealant suits the joint
Your questions about regrouting in Mislingford
Do you cover smaller places like Mislingford?
Yes, Mislingford is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can you do regrouting in Mislingford?
Yes. We work across London and the South East, and Mislingford is part of that. Just ring 0345 464 0079 or email us with a few details of the job, and we will give you a clear quote.
What if some of my tiles are loose?
New grout cannot hold loose tiles in place. We flag any loose or hollow tiles before starting, so you can decide what to do.
What information do you need?
Just the basics: where it is, what you’ve noticed and how we reach it. Then phone 0345 464 0079 or send us an email.
Do you do commercial work?
Yes. Commercial and hotel work is a large part of what we do, as well as homes. Working times can be discussed when we quote.
Is it possible to regrout only the shower area?
Yes. We’ll check the other tiled areas as well and let you know if more needs doing.
Is there any odour?
It depends on the product. Some smell for a while, some hardly at all, and any smell fades as they cure.
Will you leave a mess?
We keep the work tidy. Nearby surfaces are protected.
Landlord and commercial work in Mislingford
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.