Hampshire · England
Regrouting in Minley, Hampshire
Raking out old, cracked or stained grout and regrouting tiled walls and floors for homes and businesses in Minley and across Hampshire. Fully insured, ARBOMaster approved and guaranteed for a year.
- Kitchen splashback grout stained by grease
- Good tiles let down by tired grout
- Grout that’s cracking and breaking up
Regrouting for homes and businesses in Minley
If you’ve been scrubbing grout that will not come clean, the stain is often in the grout itself. New grout is the fix that lasts, and it’s a chance to change the colour too. We’re often asked to deal with greasy, stained grout behind the hob and grout that makes sound tiles look old, across tiled floors, bathroom floors and wet rooms.
Around Minley, it’s houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
Our work is backed for twelve months, and the guarantee is the same wherever you are.
- Place
- Minley (GU17)
- Region
- Hampshire
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
What we’re called out for in Minley
Movement behind the tiles cracks grout. That can be a loose tile, a flexing floor or a stud wall, which is why we check the tiles first.
These are the problems we’re asked about most:
- Shower grout that has worn away
- Grout that is cracking and breaking up
- A grout colour that no longer suits the room
- Grout that stays dark however much it’s cleaned
In the older streets around Church of St Andrew, older homes can move a little, which is hard on rigid grout and tired sealant.
What your quote should include
- Who does the work, and how experienced they are
- What product goes in the joint
- Whether all the old sealant comes out first
- What the cure time is
Quotes for regrouting in Minley
Jobs vary more than people expect. What affects the quote:
- Any mould that needs treating
- The number and length of the joints
- Which sealant suits the joint
- How much old sealant there is and how hard it is to remove
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Call for a quick quote and we’ll go through it with you.
Helping us quote
When you call or email, these details help:
- The type of property
- How many joints, rooms or windows are involved
- Where the job is, and your postcode
- A few pictures by email, if you can
We quote each job on its own. Just ring 0345 464 0079 or send us an email with the details, and pictures are welcome.
Can I do it myself?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
How the visit works
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. For most jobs that takes a few hours, or longer for a fully tiled room. For a village or hamlet like Minley, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We agree the area to be regrouted and point out any loose tiles.
- We remove the old grout carefully.
- Dust is cleared from every joint.
- We grout the joints and wipe the tiles clean.
- Internal corners and edges are resealed.
Preparing for the visit
- Clear the area around the work
- Tell us about access, such as stairs, a lift or high-level joints
- Mention if the joints have been sealed before
How to get a quote
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. Whenever you’re ready, call 0345 464 0079 or send us an email.
Advice
How to look after the new joints
No joint lasts for ever, but care makes a real difference. Our tips:
- Avoid neat bleach and strong acid descalers on grout
- Do not ignore a tile that feels loose
- Look at the sealant in the corners now and then
- Use a squeegee on the tiles after showering
A squeegee or cloth over the tiles after use stops soap and water sitting on the grout. Ventilate the room well so the grout dries between uses.
Leaving failed grout can mean tiles come loose. By then, new grout alone isn’t enough so early action pays.
What sealant work cannot fix
Sealant isn’t the answer to every problem, and we’d rather say so up front. Sealant won’t put right:
- Water coming from plumbing rather than grout
- Cracked or broken tiles
- Loose tiles, which need refixing first
If in doubt, phone 0345 464 0079 or send us an email and we will say what we think before booking.
Joints and surfaces we work on
- Kitchen splashbacks
- Wet rooms
- Tiled floors
- Bathroom floors
- Bathroom wall tiles
- Shower walls
Your questions about regrouting in Minley
Can you help a landlord with a rental near Fleet station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just phone 0345 464 0079 or email us with the address and what needs doing, and we’ll give you a clear quote.
Do you cover Minley for regrouting?
Yes, Minley is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or drop us an email with a few details of the job, and we will give you a clear quote.
What should I tell you?
Where the job is, what the problem is and roughly how big it is. Photos by email help too.
Do you guarantee regrouting?
You get our 12-month guarantee on every job, and we are fully insured.
Are you an approved applicator?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Can you regrout just the shower?
Yes. A lot of our jobs are only the shower, or the area where the grout has gone.
Where do you work from?
We work from Crawley. We cover Minley and the rest of Hampshire.
Could my grout be a different colour after regrouting?
Yes, regrouting is the time to do it. Mention the colour you have in mind when you ring 0345 464 0079 or email us.
What else we do in Minley
Surface by surface
Shower walls
Most regrouting jobs include a shower. Gaps here let water get behind the tiling.
Wet rooms
New grout in a wet room keeps the surface sound. It can’t fix waterproofing below the tiles.
Minley homes and their sealant
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
If you look after a building such as Frogmore Community College, its toilets, changing areas and kitchens need their sealant renewed like any other building’s. Letting a property close to Fleet station? Then stained grout drags a rental down, and regrouting between lets puts that right.
Minley is about 2 miles south of Yateley, in Hampshire. Anywhere in GU17, we cover regrouting for homes and businesses. Across Hampshire, we cover 683 places, and Minley is one of them. You can also see our page for Reading, about 11 miles away.
Every address in GU17 is covered for regrouting, from the main roads to the quietest streets. Other places close to Minley include Darby Green (1 mile north-east), Yateley (2 miles north), Little Sandhurst (3 miles north), Eversley Cross (3 miles north-west) and Hartfordbridge (3 miles west). Within a short drive, we also cover Basingstoke (13 miles west), Farnborough (3 miles south-east), Fleet (3 miles south), Aldershot (5 miles south-east), Alton (13 miles south-west) and Tadley (14 miles west).
What’s near Minley
In Minley, that means homes and buildings near Ancells Farm Park and The Ely pub. Minley’s nearest station is Fleet station, roughly 1.9 miles south of the centre. A little further out are Staff College Museum (3.5 miles north-east) and Fleet Community Hospital (2.4 miles south-west). Not far away are Horseshoe Lake and Ancells Farm Nature Reserve.