Kent · England
Regrouting in Milebush
Raking out old, cracked or stained grout and regrouting tiled walls and floors for homeowners, landlords and businesses in Milebush. Fully insured, ARBOMaster approved and guaranteed for a year.
- Floor grout that won’t come clean
- Gaps where the shower grout has gone
- A grout colour that no longer suits the room
For landlords and businesses
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
About our regrouting in Milebush
If you’ve been scrubbing grout that will not come clean, the discolouration has normally soaked into the grout. New grout is the fix that lasts and you can pick a different colour while you’re at it. We work on bathroom wall tiles, bathroom floors and shower walls, and common reasons people get in touch are stained grout that cleaning won’t shift and discoloured grout on otherwise sound tiles.
Around Milebush, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
You are covered for a year from the day we finish. If anything isn’t right with it, call 0345 464 0079 or email us.
- Where
- Milebush (TN12)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
DIY sealant or a professional job?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Regrouting around Milebush
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
Homes close to St Michael and All Angels Church include some older properties, and walls and floors in older homes can move, and sealant and grout show it first.
Milebush is about 6 miles south of Maidstone, in Kent. Every kind of property in Milebush can book us for regrouting, old or new, large or small. Every job comes with our one-year guarantee. Milebush is one of 922 towns and villages in Kent where we work. You can also see our page for Crawley, about 31 miles away.
All of TN12 is within our area for regrouting. Streets in the area include Maidstone Road and Milebush Lane. We also cover St Ann's Green (1 mile east), Underling Green (1 mile north-east), Wanshurst Green (1 mile south-east), Cross-at-Hand (2 miles east) and Marden Thorn (2 miles south). Within a short drive, we also cover Maidstone (6 miles north), Sittingbourne (15 miles north-east), Sevenoaks (15 miles north-west), Royal Tunbridge Wells (11 miles west), Tonbridge (10 miles west) and Kings Hill (7 miles north-west).
Landmarks near Milebush
For rail, the closest station is Marden station, roughly 1.1 miles south-west of the centre. A little further out are Sutton Valence Castle (4.2 miles north-east) and Oakwood Hospital (5.7 miles north).
How it works
We work through the job in order: protect, prepare, seal, tidy. Typically it takes anything from a few hours to a full day, depending on the area. For a village or hamlet like Milebush, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We check the tiles for any that are hollow or loose.
- The old grout is removed to an even depth.
- The joints are vacuumed clean.
- We regrout the joints and clean the tile faces.
- We finish with silicone in the moving joints.
Before we arrive
- Mention any tricky access
- On commercial sites, let us know about site rules
- Mention any leaks or damp you’ve noticed
How to get a quote
We quote each job on its own, so start by telling us what you need. Just ring 0345 464 0079 or send us an email with the details.
Advice
Aftercare tips
Once the sealant has cured, a few habits help it last:
- Rinse soap off the tiles after each shower
- Skip wire brushes and scourers
- Use gentle cleaners on grout
- Don’t ignore a tile that feels loose
Before we leave, you’ll know when the shower can be used. Stick to that time, and avoid scrubbing the new grout hard for the first few days.
Leaving failed grout can mean tiles come loose. Once that happens, regrouting won’t fix it, so it’s worth acting early.
Towns and villages near Milebush
What else we do in Milebush
Quotes for regrouting in Milebush
The quote reflects the job in front of us. We look at:
- How easy the joints are to reach
- Any working-time requirements on site
- The old material and how stubborn it is
- The size of the job
What it costs depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before work begins, so you know where you stand.
What to tell us for a quote
Before you ask for a quote, have a think about:
- Any previous sealing or DIY work
- Where the property is
- Access, such as stairs, a lift or height
- Whether it’s a home or a business
There’s no standard price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To arrange one, ring 0345 464 0079 or send us an email.
Common problems we fix in Milebush
A bathroom that stays damp keeps the grout wet, giving mould a place to grow. When black spots keep returning, the mould has usually got into the grout.
Signs it’s time to call us include:
- Grout washed out of a shower
- Corners filled with grout instead of silicone
- Discoloured grout on otherwise sound tiles
- Floor grout that has worn and darkened
If you let a flat or house near Marden station, a regrout while the flat is empty is quicker than working around a tenant.
What your quote should include
- Is the old sealant removed completely?
- Who does the work, and how experienced they are
- Whether you can choose the colour
- Whether they’re fully insured
Questions from Milebush
Do you cover Milebush for regrouting?
Yes, Milebush is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or drop us an email with a few details of the job.
Do you work for landlords with property near Marden station?
Yes, we work for landlords and agents. You can call 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before any work starts.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
Will it make a mess?
We keep the work tidy. We protect what’s around the joints.
Is it possible to regrout only the shower area?
Yes. Many jobs are just the shower walls, or the area where the grout has gone.
Do you remove the old sealant?
Always. Sealing over the old bead is the commonest cause of early failure, so we never do it.
Do you do commercial work?
Yes, regularly. Larger jobs can be planned room by room or area by area.
What sealant do you use?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we’ll tell you what we are using.
When it isn’t the sealant
To be straight with you, there are a few things sealant won’t fix:
- Leaks from pipes, valves or wastes (a plumber’s job)
- A leaking wet room membrane
- A structure that flexes behind the tiles
If in doubt, ring 0345 464 0079 or send us an email and we’ll say what we think before booking.
Surfaces we seal
- Wet rooms
- Bathroom wall tiles
- Tiled floors
- Kitchen splashbacks
- Shower walls
- Bathroom floors