Hampshire · England
Micheldever Station Regrouting
Raking out old, cracked or stained grout and regrouting tiled walls and floors for Micheldever Station, backed by a 12-month guarantee. Ask us for a quote.
- Shower grout that has worn away
- Grout that makes sound tiles look old
- Grout stained black or orange that won’t clean
Regrouting around Micheldever Station
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Letting a property close to Overton station? Then a regrout while the flat is empty is quicker than working around a tenant. In and around Micheldever Station, as anywhere, good regrouting starts with a clean, dry, properly prepared joint.
Micheldever Station is about 8 miles north of Hyde, in Hampshire. Homes, rented property, offices and hotels in Micheldever Station can book us for regrouting, old or new, large or small. The work is guaranteed for a year. Micheldever Station is one of 683 places in Hampshire we cover for regrouting. Our Southampton page covers work nearby, about 19 miles away.
All of SO21 is covered for regrouting. Local streets include Andover Road, Overton Road and Ellis Drive, and we cover them all. Neighbouring places we cover for regrouting include Northbrook (2 miles south), Micheldever (2 miles south), East Stratton (3 miles south-east), Hunton (3 miles south-west) and Stoke Charity (3 miles south-west). Within a short drive, we also cover Basingstoke (9 miles north-east), Winchester (9 miles south), Eastleigh (15 miles south), Andover (10 miles west), Chandler's Ford (15 miles south) and Alton (13 miles east).
Around Micheldever Station
Typical jobs here are in homes near The Dove Inn, among other places. The nearest railway station is Overton station, roughly 5 miles north.
How we handle regrouting in Micheldever Station
Our applicators rake out the old grout to an even depth, taking care not to chip the tile edges. After vacuuming, new grout goes in and the tiles are wiped clean, with silicone renewed in the corners. Typical jobs include kitchen splashback grout stained by grease and floor grout that won’t come clean, across shower walls, wet rooms and bathroom wall tiles.
Being in a small place like Micheldever Station makes no difference to the job itself: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
You get a one-year guarantee, the same in Micheldever Station as everywhere else we work.
- Place
- Micheldever Station (SO21)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Price
- A clear price before we start
- Call
- 0345 464 0079
- Updated
- 26 October 2026
DIY sealant or a professional job?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Honest limits
In fairness, there are a few things sealant will not fix:
- A floor or wall that keeps moving
- Waterproofing that has failed below the tiling
- Leaks from pipes, valves or wastes (a plumber’s job)
If you’re not sure, just phone 0345 464 0079 or drop us an email and we’ll give you a straight answer before booking.
Surfaces we seal
- Tiled floors
- Bathroom floors
- Wet rooms
- Bathroom wall tiles
- Shower walls
- Kitchen splashbacks
Questions from Micheldever Station
Do you cover Micheldever Station for regrouting?
Yes. Our work covers London and the South East, and Micheldever Station is part of that. Just phone 0345 464 0079 or email us with a few details of the job, and we’ll give you a clear quote.
Can you help a landlord with a rental near Overton station?
Yes. We work for landlords and agents as well as householders. You can ring 0345 464 0079 or email us with the details for a clear quote.
Is it worth trying it myself?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
What goes in the corners, grout or silicone?
We use silicone in corners and along edges. Grout in those joints cracks as the building moves.
How long should I wait before showering?
We give you a time before we leave. The wait depends on the products and conditions so please stick to it.
Will the old sealant be removed?
Yes, every time. New sealant will not bond properly to old, so the joint is cleaned back first.
Can you do several jobs on one visit?
Yes. Just list everything you need and we’ll quote it together.
Can you regrout if a few tiles are loose?
Regrouting won’t fix loose tiles. We check the tiles first and tell you if any are loose or hollow, so you can decide what to do.
The process
All our tools and materials come with us in the van, so there’s nothing for you to buy. Once we’ve agreed what’s being done, the area is protected and the work begins. It normally takes a few hours, or longer for a fully tiled room. For a village or hamlet like Micheldever Station, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We start by checking the tiles for any that are loose or hollow.
- We rake out the old grout to an even depth, taking care of the tile edges.
- The joints are vacuumed and cleaned.
- Fresh grout goes into the joints and the tile faces are wiped clean.
- Corners and edges are resealed with flexible silicone, not grout.
Preparing for the visit
- Mention if the joints have been sealed before
- Tell us if parking is tricky
- Keep pets and children clear of the area while we work
Getting a quote
Every job is quoted individually, so start by telling us what you need. Simply call 0345 464 0079 or drop us an email and describe the job, and photos are welcome.
Read more
Why it’s worth doing now in Micheldever Station
Grouting over old grout rarely lasts. A thin skin on top tends to break off. Raking out to a consistent depth gives the new grout something to hold. Around Micheldever Station, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
What it costs depends on the size of the job, how much old material has to come out and how easy the joints are to reach. We give a clear quote before we start, so you know where you stand.
What you get with us
- ARBOMaster approved applicator
- Any old sealant cut out fully, not covered over
- Experience in homes, commercial sites and hotels
- 4.9 on Google from 180+ five-star reviews
Landlords, agents and businesses in Micheldever Station
Landlords and agents in Micheldever Station can book us as well as homeowners. Resealing between tenancies keeps a property looking cared for before the next move-in.
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Aftercare tips
Joint life depends on how it’s used and looked after. We suggest:
- Keep the fan on after showering
- Use a squeegee on the tiles after showering
- Rinse soap off the tiles after each shower
- Keep an eye on the silicone along the edges
Check the corner silicone now and then. It’s the part that moves, so the sealant there will need renewing in time, long before the grout does.
Grout that stays dark after cleaning is starting to fail. At this point it’s a simple regrout while the tiles are still sound.
How we quote for regrouting
There’s no set price list, because no two jobs are the same. The quote depends on:
- Any working-time requirements on site
- Whether the work is at height
- Whether there’s mould to deal with
- The number and length of the joints
We do not show prices on the website, because each job is priced on what it involves. For a quick quote, please phone 0345 464 0079 or drop us an email and we’ll talk you through it.
Helping us quote
Photos by email are helpful but not essential. Please mention:
- Where the job is, and your postcode
- If it’s domestic, commercial or a hotel
- The problem you’ve noticed
- How many joints, rooms or windows are involved
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll explain how we’d tackle it. When it suits you, ring 0345 464 0079 or send us an email.