Hampshire · England
Lymore Regrouting
Specialist regrouting for Lymore: careful preparation, the right product and tidy work. Call for a quick quote.
- Floor grout that won’t come clean
- Stained grout that cleaning won’t shift
- Old grout in a dated colour
Bathrooms and kitchens in Lymore
Lymore is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near Lymington Town station, clean grout and fresh sealant between tenancies make a bathroom look cared for again. In the older streets around Church of All Saints, walls and floors in older homes can move, and sealant and grout show it first.
Lymore is about 2 miles south-west of Lymington, in Hampshire. Homes, rented property, offices and hotels in Lymore is covered for regrouting, old or new, large or small. Every job comes with our one-year guarantee. Across Hampshire, we cover 683 places, Lymore among them. We also work in Southampton, about 15 miles from Lymore.
Here we cover the SO41 postcode area for regrouting. Local streets include Lymore Valley, Lymore Lane and School Lane, and we cover them all. If you’re just outside Lymore, we cover Everton (1 mile north), Milford on Sea (1 mile south-west), Keyhaven (1 mile south-east), Lower Pennington (1 mile east) and Pennington (2 miles north-east). We also work in nearby towns such as Totton (13 miles north), Hythe (12 miles north-east), New Milton (4 miles west), Ringwood (12 miles north-west), Warsash (15 miles north-east) and Barton on Sea (4 miles west).
What’s near Lymore
Typical jobs here are in homes near Priestlands School and The Crown Public House, among other places. The nearest railway station is Lymington Town station, roughly 2.7 miles north-east. A little further out are Lymington New Forest Hospital (2.9 miles north-east) and St Barbe Museum and Art Gallery (2.4 miles north-east). For a walk, there’s Milford on Sea LNR.
Regrouting in Lymore
Regrouting is generally paired with resealing. Grout belongs between tiles, but internal corners and edges flex, so they need flexible silicone instead. Doing both at once leaves the whole area sound. We work on bathroom floors, wet rooms and kitchen splashbacks, and common reasons people get in touch are greasy, stained grout behind the hob and floor grout that has worn and darkened.
For a small place like Lymore, regrouting is planned like any other job: the journey and access are simply agreed in advance. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
There’s a 12-month guarantee on every job, large or small.
- Place
- Lymore (SO41)
- Wider area
- Hampshire
- Guarantee
- A year, on every job
- Quote
- A clear price before we start
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Looking after it afterwards
How long the joints last depends on use and care. We suggest:
- Have loose tiles looked at early
- Rinse the tiles after showering
- Stick to mild products for cleaning grout
- Do not use strong acidic cleaners on grout
Leave the area unused for as long as we advise, so it can harden properly. From then on, a quick rinse after showering helps and keep the room ventilated.
Tiles can come away if failed grout is left. By then, new grout alone isn’t enough, so it’s worth acting early.
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Your questions about regrouting in Lymore
Is Lymore within the area you cover?
Yes. Lymore is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
I let a flat near Lymington Town station. Can you help?
Yes. We work for landlords and agents as well as householders. Just ring 0345 464 0079 or drop us an email with the address and what needs doing, and we will send you a clear quote.
What if some of my tiles are loose?
Regrouting will not fix loose tiles. We check the tiles first and tell you if any are loose or hollow, so you can decide what to do.
Is it messy?
Tidy work is part of the job. Nearby surfaces are protected, and the area is left clean when we finish.
Do the sealants smell?
There can be a smell while the sealant cures, which fades as it sets. Ventilation helps.
What goes in the corners, grout or silicone?
Silicone. Grout belongs between the tiles and moving joints need sealant.
Do I have to be there?
We need access to the joints, so we’ll agree that with you when we book. For inside work, that normally means someone being in.
What sealant do you use?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We will tell you what we’re using and why.
What we’re called out for in Lymore
Hard water and soap leave a film on grout that’s hard to shift. The grout beneath can stain and weaken, which is when replacing it makes sense.
Most people get in touch after spotting one of these:
- Cracked or crumbling grout lines
- Shower grout that has worn away
- Greasy, stained grout behind the hob
- Grout stained black or orange that will not clean
If you look after a building such as Milford-on-Sea Church of England Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Questions to ask before you book
- How much experience the applicator has
- What product goes in the joint
- How hidden problems are handled
- What guarantee comes with the work
What the job involves on each surface
Bathroom floors
Cracked floor grout can point to movement underneath. We check the tiles before regrouting.
Kitchen splashbacks
A splashback can be regrouted without touching the worktop. The joint along the worktop is resealed with silicone.
How the visit works
Our applicators work methodically: protect, prepare, seal, tidy. Typically it takes anything from a few hours to a full day, depending on the area and we leave things clean and tidy. Somewhere as small as Lymore, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We agree the area to be regrouted and point out any loose tiles.
- We remove the old grout carefully.
- The joints are cleaned out and vacuumed.
- The new grout goes in, then the tile faces are cleaned.
- Internal corners and edges are resealed.
Before we arrive
- Mention any parking rules near the property
- Keep pets and children clear of the area while we work
- Mention any tricky access
Ask for a quote
If you are in Lymore and need regrouting, ring 0345 464 0079 or send us an email. Tell us what the problem is and where, and you’ll get a clear quote before work begins.
Read more
Nearby places to Lymore
More services for Lymore
Honest limits
Some problems need a builder, plumber or other trade rather than us:
- Damaged tiles that need replacing
- A leaking shower valve or waste
- Tiles that are loose or hollow behind
If in doubt, phone 0345 464 0079 or drop us an email and we’ll say what we think.
What we seal
- Kitchen splashbacks
- Tiled floors
- Bathroom wall tiles
- Shower walls
- Wet rooms
- Bathroom floors
What affects the quote in Lymore
For a quick quote, just ask. The main things that affect it are:
- Working hours on commercial sites
- How many rooms, windows or areas are involved
- The size of the job
- Which sealant suits the joint
The cost depends on the size of the job, how much old material has to come out and how easy the joints are to reach. You will have a clear quote before any work starts, so you know where you stand.
Helping us quote
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- Pictures of the joints, sent by email
- Any access issues, like height or stairs
- What the problem is, such as mould, gaps, leaks or cracking
- Roughly how big the job is
We don’t publish a price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or drop us an email.