Hampshire · England
Remedial sealant & repairs in Lymore, Hampshire
Remedial sealant for Lymore and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Mould trapped under a layer of silicone
- Repeat leaks from the same joint
- Kitchen joints letting water behind the worktop
Remedial sealant in Lymore
In Lymore, as anywhere, remedial jobs tend to look alike: over-sealed joints, hidden mould, repeat leaks and split movement joints. We strip each one back and start from scratch. Typical jobs include decorators’ caulk around a bath or shower and sealant applied over old sealant that has lifted, on leaking tray & enclosure joints, botched or over-sealed joints and expansion joints.
For a small place like Lymore, remedial sealant is planned like any other job: it just means planning the journey and access beforehand. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
Big or small, it’s backed by our 12-month guarantee.
- Where
- Lymore (SO41)
- Wider area
- Hampshire
- Cover
- A year, on every job
- Quote
- A clear price before work begins
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
DIY sealant or a professional job?
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.
How it works
We work through the job in order: protection first, then preparation, sealing and a tidy-up. For most jobs that takes a few hours for most joints, depending on how much old sealant has to come out. Somewhere as small as Lymore, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We protect the surfaces around the joint.
- The botched or failed sealant is cut away completely.
- The joint is degreased and checked for movement and leaks.
- New sealant goes in once the joint is dry, and is tooled smooth.
- We give you the cure time and explain what caused the failure.
Preparing for the visit
- Tell us about any water getting in
- Try not to wet indoor joints just before the visit
- Move anything stored near the joints
How to get a quote
We don’t publish a price list. Instead, your job gets its own clear quote. To get started, ring 0345 464 0079 or email us.
Related advice
Also near Lymore
Other services in Lymore
Lymore homes and their sealant
Lymore is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
For landlords with property near Lymington Town station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak. In the older streets around Church of All Saints, timber floors under older bathrooms flex, so joints need a sealant that moves with them. Schools such as Milford-on-Sea Church of England Primary School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Lymore is about 2 miles south-west of Lymington, in Hampshire. Wherever you are in the SO41 postcode area, our applicators can take on remedial sealant. Lymore is one of 683 places in Hampshire where we work. You can also see our page for Southampton, roughly 15 miles from Lymore.
We work across the SO41 postcode area for remedial sealant and the streets around it. If you need remedial sealant at a property on Lymore Valley, Lymore Lane and School Lane or anywhere close by, our applicators can take on the job. If you’re just outside Lymore, we cover Everton (1 mile north), Milford on Sea (1 mile south-west), Keyhaven (1 mile south-east), Lower Pennington (1 mile east) and Pennington (2 miles north-east). Larger places within reach include Totton (13 miles north), Hythe (12 miles north-east), New Milton (4 miles west), Ringwood (12 miles north-west), Warsash (15 miles north-east) and Barton on Sea (4 miles west).
Around Lymore
Typical jobs here are in homes near Priestlands School and The Crown Public House, among other places. The closest station to Lymore is Lymington Town station, roughly 2.7 miles north-east. A little further out are Lymington New Forest Hospital (2.9 miles north-east) and St Barbe Museum and Art Gallery (2.4 miles north-east). Open spaces near Lymore include Milford on Sea LNR.
Surface by surface
Windows & doors
A frame that keeps leaking may not be the mastic. If the frame joint isn’t the cause, we will say so.
Movement & expansion joints
Some movement joints have been filled with mortar or grout. Where it can be raked out, we replace it with flexible sealant.
Lymore: your questions answered
Do you work for landlords with property near Lymington Town station?
Yes, we work for landlords and agents. Just call 0345 464 0079 or send us an email and tell us about the property, and we will give you a clear price.
Do you cover Lymore for remedial sealant?
Yes. Our work covers London and the South East, and Lymore is part of that. You can call 0345 464 0079 or email us and tell us what needs doing.
Which products do you use?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We’ll tell you what we’re using and why.
Does remedial work come with a guarantee?
Yes, for 12 months. Where we have flagged another fault, it needs fixing for the joint to last.
When is the sealant fully cured?
Different products cure at different speeds, so follow the cure time we give you when we finish.
Can you do several jobs on one visit?
Yes, and it often makes sense. Doing several areas at once is generally more efficient, so mention them when you ask for a quote.
Do you offer different sealant colours?
Yes. Sealants come in white, clear, grey and other colours for many products, and we will agree it with you first.
Will it make a mess?
We keep the work tidy. Nearby surfaces are protected, and we clear up when we’re done.
Aftercare tips
So the new joints stay in good condition:
- Check trays and worktops do not move
- Deal with small splits early
- Keep bleach and abrasives off the bead
- Find out why the sealant failed first
Give the new sealant its full cure time: normally around 24 hours, or as long as we advise.
Mould trapped under over-sealed joints spreads unseen. By the time it shows through, the joint is well past saving.
Quotes for remedial sealant in Lymore
Jobs vary more than people expect. The main factors:
- The size of the job
- Whether old sealant or filler has to be cut out
- Mould in or behind the old joints
- How many areas need sealing
The cost depends on the size of the job, how hard the old material is to remove and access to the work. We give a clear quote before we start.
What to tell us for a quote
You do not need to know the technical terms. It helps if you can tell us:
- Any previous sealing or DIY work
- A few photos by email, if you can
- How we’d reach the joints
- Whether it’s a home or a business
Every job is quoted individually, so start by telling us what you need. Just call 0345 464 0079 or email us with the details, and pictures are welcome.
Landlord and commercial work in Lymore
Landlords and agents in Lymore can book us as well as householders. Resealing between tenancies is a simple way to keep a property in good order.
Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.
Why deal with it now?
Stripping out botched sealant adds time to a reseal, but not by much: it takes a few hours, depending on how many layers have to come out. It’s far less disruption than resealing the same joint again and again. Around Lymore, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
Why us?
- Sanitary silicone with an anti-fungal additive in wet areas
- Homes, businesses and hotels
- We leave the area clean and tidy
- A choice of colours where the product allows