Hampshire · England
Lower Pennington Remedial Sealant
Removing failed, mouldy or leaking sealant and putting it right for homes and businesses in Lower Pennington and across Hampshire. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- A second bead peeling off the first
- Worktop sealant that has shrunk and split
- Products that weren’t meant for the joint
Why act early in Lower Pennington
Another bead over the top won’t fix a failed joint. It cannot bond to what’s underneath, leaving the leak in place and one more layer to cut out later. Older cottages and farmhouses around Lower Pennington can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
What you get with us
- Colour picked to suit the job
- Rated 4.9 stars on Google
- Trusted Arbo and Everbuild sealants
- Anti-fungal silicone where joints get wet
See our cost guide or customer reviews.
Remedial sealant for homes and businesses in Lower Pennington
Removing failed sealant is the hardest part of the job. We cut out every layer, clear the residue and degrease the surfaces, taking care not to scratch the surfaces around it. Only then can new sealant bond. If you have decorators’ caulk around a bath or shower and sealant that came away because the surface wasn’t prepared, we can help, on shrunken worktop sealant, failed movement joints and expansion joints alike.
Somewhere as small as Lower Pennington, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
Our work is backed for twelve months.
- Where
- Lower Pennington (SO41)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
How it works
Most of a good job is in the preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours for most joints, depending on how much old sealant has to come out. Somewhere like Lower Pennington needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First we find out how and where the joint has failed.
- We strip the joint completely, removing any layers below.
- The joint is cleaned, treated for mould and left to dry.
- We use the right backing and sealant for any joint that moves.
- We tool the joint and tell you about anything else that needs attention.
How to prepare
- Keep children and pets away from the work area
- Mention any sign-in or site rules at work premises
- Mention any leaks or damp you’ve noticed
How to get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.
Advice
Also near Lower Pennington
Also in Lower Pennington
When something else is needed
In fairness, there are a few things sealant won’t fix:
- Older mastics that may need an asbestos check before removal
- Tiles that have come away from the wall
- Leaks from a shower valve, waste or pipework (a plumber’s job)
If you are not sure, just call 0345 464 0079 or drop us an email and we will give you a straight answer before booking.
Where we work in Lower Pennington
- Botched or over-sealed joints
- Mouldy bath & shower sealant
- Failed movement joints
- Leaking tray & enclosure joints
- Expansion joints
- Shrunken worktop sealant
For landlords and businesses
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Signs you need remedial sealant in Lower Pennington
Joint depth matters. A bead bonded on three sides, or laid too thick, can’t flex, and tears at the first real movement. Backing sets the depth and stops that.
If you can see any of these, it’s time to have the joints looked at:
- Kitchen joints letting water behind the worktop
- Sealant peeling off a dusty or damp surface
- Repeat leaks from the same joint
- Sealant applied over old sealant that has lifted
For site and facilities teams at buildings such as Priestlands School, we reseal washrooms and kitchens in schools and businesses as well as homes.
What your quote should include
- Whether the sealant suits the joint
- What happens if the job turns out different
- Is VAT in the price?
- Is the old sealant removed completely?
How the job changes by surface
Over-sealed & botched joints
Previous removal attempts can leave scratches or gouges. We take care not to make it worse, and point out any existing damage.
Worktops & kitchens
Kitchen joints hold grease and residue, so cleaning takes longer than in a bathroom.
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Lower Pennington homes and their sealant
Lower Pennington is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For landlords with property near Lymington Pier station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak. Homes close to Church of All Saints include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Lower Pennington is about 1 mile south of Lymington, in Hampshire. If you need remedial sealant in Lower Pennington, please call 0345 464 0079 or send us an email for a quick quote. We cover Hampshire from our Crawley base, Lower Pennington included. We cover 683 towns and villages across Hampshire, large and small. We also work in Southampton, around 14 miles away.
Work in SO41 is quoted and booked the same way as anywhere else. If you are just outside Lower Pennington, we cover Pennington (1 mile north), Lymington (1 mile north), Lymore (1 mile west), Keyhaven (1 mile south-west) and Walhampton (2 miles north-east). Within a short drive, we also cover Totton (13 miles north), Hythe (11 miles north-east), New Milton (5 miles west), Ringwood (12 miles north-west), Locks Heath (15 miles north-east) and Warsash (14 miles north-east).
What’s near Lower Pennington
Around Lower Pennington, our work takes us to homes and buildings near Chequers Inn and Pennington Infant School, among other places. Lower Pennington’s nearest station is Lymington Pier station, roughly 1.6 miles north-east of the centre. Well-known places in the area include St Barbe Museum and Art Gallery (1.4 miles north) and Lymington New Forest Hospital (2 miles north). Green spaces nearby include Lymington and Keyhaven Marshes Nature Reserve.
Common questions in Lower Pennington
Can you help a landlord with a rental near Lymington Pier station?
Yes, we work for landlords and agents. You can call 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before work begins.
Do you take on hotel work around Lower Pennington?
Yes, hospitality work, including hotels, is part of what we do. Work can be planned room by room, and out-of-hours working can be arranged.
My shower still leaks after a reseal. Can you sort it?
Yes. All the sealant comes out, we find out why it failed, and the joint is resealed properly.
Will it make a mess?
Very little: the area around the joints is protected first, and we tidy up before we go.
What sealant do you use?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
What do you need from me for a quote?
Just the basics: where it is, what you’ve noticed and how we reach it. After that, simply phone 0345 464 0079 or email us.
Will the old sealant be removed?
Yes, every time. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
Can failed expansion joints be resealed?
Yes. We cut out the failed sealant, fit backing and reseal with a flexible product.