Dumfries and Galloway · Scotland

Regrouting in Lime Kiln

Regrouting across Lime Kiln and nearby, with every bit of old sealant taken out first and a 12-month guarantee.

  • Grout that stays dark however much it’s cleaned
  • Greasy, stained grout behind the hob
  • Old grout in a dated colour

Trusted regrouting in Lime Kiln

Regrouting for homes and businesses in Lime Kiln

We take the old grout out to a consistent depth, without damaging the edges of the tiles. After vacuuming, new grout goes in and the tiles are wiped clean, and the corners get fresh silicone. Common call-outs are for crumbling grout between the tiles and floor grout that has worn and darkened, on bathroom wall tiles, bathroom floors and shower walls.

Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.

Your job is guaranteed for a year, as with all our work.

Silicone being applied where a shower enclosure meets beige wall tiles
Location
Lime Kiln (DG9)
Wider area
Dumfries and Galloway
Cover
A year, on every job
Quotes
A clear quote up front
Email
info@mrmastic.co.uk
Updated
26 October 2026

Why it’s worth doing now in Lime Kiln

Regrouting keeps the tiles you already have. Retiling is a much bigger job: stripping, making good, new tiles and new grout, and often a few days without a shower. If the tiles are sound, regrouting is the simpler fix. In an older home around Lime Kiln, damp from a failed joint can get into timber and plaster, which is a far bigger job than the sealant.

Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.

Why Lime Kiln clients choose us

  • Any old sealant cut out fully, not covered over
  • We leave the area clean and tidy
  • ARBOMaster approved applicator
  • We’re fully insured

See how sealant jobs are priced and what customers say.

Regrouting around Lime Kiln

Lime Kiln is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. But mould still grows into sealant and grout in a room that doesn’t dry out.

Homes close to Old Parish Church and Burial-ground include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.

Lime Kiln is about 2 miles east of Stranraer, in Dumfries and Galloway. If you need regrouting in Lime Kiln, it’s easy to get a quote: please drop us a line at info@mrmastic.co.uk. We are based in Crawley and cover Dumfries and Galloway. Across Dumfries and Galloway, we cover 138 places, and Lime Kiln is one of them. For nearby work, see our Glasgow page.

Work in DG9 works the same way as everywhere else we cover. If you’re just outside Lime Kiln, we cover Aird (1 mile north-east), Castle Kennedy (1 mile east), Innermessan (2 miles north), Stranraer (2 miles west) and Lochans (2 miles south-west).

Around Lime Kiln

Lime Kiln’s nearest station is Stranraer station, roughly 2 miles north-west of the centre. Other landmarks nearby include Stranraer Museum (2 miles west) and Lochinch Castle (1.6 miles north-east). Green spaces nearby include Soulseat Loch.

Map of Lime Kiln © OpenStreetMap contributors

What happens on the day

When we arrive, we start by going over the job with you, so you know exactly what we are doing. Surfaces next to the work are protected before any work begins. Most jobs take anything from a few hours to a full day, depending on the area. In smaller Scottish places, parking is normally less of an issue than access and distance. Let us know how to find you and how to reach the joints.

  1. First, we check for loose or hollow tiles and point out any we find.
  2. Old grout is raked out to a consistent depth without chipping the tiles.
  3. Dust and debris are vacuumed out of every joint.
  4. New grout is worked into the joints and cleaned off the tile faces.
  5. The corners and edges get new silicone, because grout there would crack.

Getting ready for the visit

  • Clear items away from the joints we are working on
  • Mention any sign-in or site rules at work premises
  • Let us know about earlier repairs to the joints

Get a quote

Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. When it suits you, send an email to info@mrmastic.co.uk.

Ask for a quote

Related advice

When it isn’t the sealant

Honest advice matters more to us than a booking, so here’s what sealant cannot fix:

  • Cracked or broken tiles
  • Tiles that are loose or hollow behind
  • A leaking shower valve or waste

Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we’ll tell you honestly.

Surfaces we seal

  • Bathroom floors
  • Wet rooms
  • Shower walls
  • Bathroom wall tiles
  • Tiled floors
  • Kitchen splashbacks

DIY versus a professional finish

The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, then guaranteed for a year.

If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly.

When to call us in Lime Kiln

Harsh cleaners and scrubbing wear grout away. Some bleaches and acid descalers break grout down with repeated use, leaving the joints sunken and rough.

These are the problems we’re asked about most:

  • Cracked or crumbling grout lines
  • Grout in corners that has cracked
  • Stained grout that cleaning will not shift
  • Gaps where the shower grout has gone

Rented homes near Stranraer station change hands often, and stained grout drags a rental down, and regrouting between lets puts that right.

What your quote should include

  • How the surfaces are prepared before sealing
  • How long to leave it before use
  • Whether VAT is included
  • Who turns up on the day

How to choose a mastic man

FAQs for Lime Kiln

Can you do regrouting in Lime Kiln?

Yes, Lime Kiln is within the area we cover. Our work covers the whole of Scotland. Just send an email to info@mrmastic.co.uk with a few details of the job.

Do you work for landlords with property near Stranraer station?

Yes. We work for landlords and agents as well as householders, and several properties can go on one quote. Just email us at info@mrmastic.co.uk with the address and what needs doing, and we will send you a clear quote.

Do you guarantee regrouting?

All our work carries a one-year guarantee.

Are you fully insured?

Yes. We’re fully insured, with over 20 years’ experience in sealant work.

What information do you need?

A short description and the location, plus photos if you have them. If we need more, we’ll ask.

Are you an approved applicator?

Yes. We hold ARBOMaster approved applicator status, and we are fully insured.

Can you seal over the old sealant?

No. Fresh sealant does not stick to old sealant, and anything trapped underneath, including mould and water, stays there. It all has to come out first.

Do you remove the old sealant?

Yes. All of the old material is cut out and the joint cleaned.

Work for landlords, hotels and businesses

For anyone letting property in or around Lime Kiln, several properties can be quoted together. Just tell us the addresses and what each one needs.

Hotels need rooms back in use, so we plan the work room by room. We have worked in hotels as well as homes and businesses.

Surface by surface

Bathroom floors

If floor grout keeps cracking, the floor may be moving. We look for loose tiles first.

Wet rooms

Regrouting a wet room helps keep water on the surface of the tiles. It cannot fix waterproofing below the tiles.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job