Greater London · England
Regrouting in Kevington
Tiled areas in Kevington need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- A grout colour that no longer suits the room
- Dirty, worn grout on a tiled floor
- Corners filled with grout instead of silicone
Landlord and commercial work in Kevington
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. We can quote for more than one property at once.
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
How we handle regrouting in Kevington
A bathroom with good tiles can still look worn if the grout has gone. Regrouting replaces the grout and keeps the tiles you have, so there’s no stripping out and no new tiles to choose. We work on tiled floors, kitchen splashbacks and bathroom floors, and people most often call us about floor grout that won’t come clean and cracked or crumbling grout lines.
London’s water is hard, so limescale builds up along sealant lines, in grout and on fittings. For a bathroom or kitchen in Kevington, getting the joints right keeps water where it belongs and the room looking clean.
We stand behind the work with a one-year guarantee.
- Place
- Kevington (BR5)
- Wider area
- Greater London
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before we start
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Surface by surface
Wet rooms
Wet room grout and sealant need to be in good order. We replace the grout and reseal the edges.
Bathroom wall tiles
Splash areas around basins and baths stain first. We can do part of a wall or all of it.
When something else is needed
We will not take on work that won’t last, so here’s what sealant cannot put right:
- Tiles that have come away from the wall
- Tiles that are chipped or split
- A structure that flexes behind the tiles
If you are not sure, just call 0345 464 0079 or email us and we’ll give you a straight answer.
Joints and surfaces we work on
- Wet rooms
- Kitchen splashbacks
- Shower walls
- Tiled floors
- Bathroom wall tiles
- Bathroom floors
Regrouting around Kevington
London has hard water, so limescale builds up on sealant, grout and fittings. London has a lot of flats and conversions, and a failed shower or bath seal in one can show up on the ceiling below, so tired sealant is best dealt with early.
If you live in an older home near Unity Church, walls and floors in older homes can move, and sealant and grout show it first. As a London address, Kevington can be tricky for parking: let us know about parking bays, permits or a driveway.
Kevington is about 1 mile east of Orpington, in Greater London. Whether you’re in the middle of Kevington or further out, regrouting is available for homes and businesses alike. Across Greater London, we cover 764 places, and Kevington is one of them. You can also see our page for London, roughly 13 miles from Kevington.
All of BR5 is within our area for regrouting, from the main roads to the quietest streets. You’ll find streets such as Crockenhill Road and Sheepcote Lane. We also cover the places around Kevington: Derry Downs (1 mile west), Crockenhill (1 mile east), St Mary Cray (1 mile west), Orpington (1 mile west) and Poverest (2 miles west). Larger places within reach include London (13 miles north-west), City of Westminster (15 miles north-west), Marylebone (15 miles north-west), St Pancras (15 miles north-west), Shoreditch (13 miles north-west) and Walthamstow (15 miles north-west).
Around Kevington
Around Kevington, our work takes us to homes and buildings near The Priory School and Harris Academy Orpington, among other places. For rail, the closest station is St Mary Cray station, about 1.4 miles north-west. Well-known places in the area include Lullingstone Castle (3.2 miles south-east) and London Borough of Bromley Museum (1.5 miles west). Not far away are Summer Hill and The Warren.
Towns and villages near Kevington
What else we do in Kevington
DIY versus a professional finish
A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
Your questions about regrouting in Kevington
Do you work for landlords with property near St Mary Cray station?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or send us an email and tell us about the property, and we’ll give you a clear quote.
Is parking an issue for regrouting in Kevington?
It can be, so it helps to tell us about permits, visitor bays or off-street space when you book. The visit is then planned around what’s available.
Do I have to be there?
Access is agreed with you when the job is booked. For inside work, that normally means someone being in.
Will there be a smell?
It depends on the product. Some smell for a while, some hardly at all.
How much does regrouting cost in Kevington?
Size, access and the old material all affect the cost. Call for a quick quote.
Which products do you use?
Products from Arbo and Everbuild, among others, picked for each joint. We explain the product when we quote.
What if some of my tiles are loose?
If tiles are loose, something behind them has generally failed. Grout on its own will not fix that and we’ll say so before going ahead.
Do you hold any approvals?
Yes. We hold ARBOMaster approved applicator status and we are fully insured too.
How it works
All our tools and materials come with us in the van, so you don’t need to buy or prepare anything. Once we have agreed what’s being done, we protect the area and start. Most jobs take anything from a few hours to a full day, depending on the area. Many London jobs are in flats, so we come ready for stairs, narrow hallways and shared entrances. If the building has a concierge, managing agent or access rules, tell us when you book.
- We start by checking the tiles for any that are loose or hollow.
- The old grout comes out to a consistent depth, without damaging the tiles.
- The joints are vacuumed and cleaned.
- New grout is worked into the joints and cleaned off the tile faces.
- The corners and edges get new silicone, because grout there would crack.
Before we arrive
- For indoor joints, keep the area dry beforehand if you can
- Let us know about earlier repairs to the joints
- Mention any tricky access
Getting a quote
For a quote, call 0345 464 0079 or send us an email with the location and a short description of the problem. You will have a clear quote before we start.
Advice
Signs you need regrouting in Kevington
A bathroom that stays damp keeps the grout wet, and damp grout is where mould grows. Black marks that come back after cleaning are often in the grout itself.
These are the problems we’re asked about most:
- Cracked grout along the bath or tray
- Grout stained black or orange that won’t clean
- Grout that makes sound tiles look old
- Old grout in a dated colour
Rented homes near St Mary Cray station change hands often, and stained grout drags a rental down, and regrouting between lets puts that right.
Comparing quotes
- Whether VAT is included
- Who turns up on the day
- The length of the guarantee
- Are they insured?
What affects the quote in Kevington
The price is agreed before any work begins. It’s based on:
- The type of sealant required
- Access and height
- Any mould that needs treating
- How much old sealant there is and how hard it is to remove
The cost depends on the amount of work, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before we start.
What we need to know
There’s no need for technical detail. It helps if you can tell us:
- How we’d reach the joints
- The address or postcode of the job
- How many joints, rooms or windows are involved
- Whether it’s a home or a business
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we will explain what’s involved.