Greater London · England
Regrouting in Honor Oak, Greater London
Professional regrouting in and around Honor Oak, with every bit of old sealant taken out first.
- Crumbling grout between the tiles
- Grout in a colour the owner wants to change
- Greasy, stained grout behind the hob
How we handle regrouting in Honor Oak
We check the tiles before any grout comes out. If any tiles are loose or sound hollow, we tell you, since new grout can’t fix a problem underneath. With sound tiles, regrouting is a tidy, lasting improvement. If you are dealing with corners filled with grout instead of silicone and grout stained black or orange that won’t clean, we can put it right, on bathroom floors, wet rooms and shower walls alike.
Across London, a large share of homes are flats, conversions or mansion blocks, and many bathrooms sit right above someone else’s ceiling. That makes worn sealant and cracked grout in Honor Oak more than a cosmetic job.
Whatever the size of the job, you get the same one-year guarantee.
- Place
- Honor Oak (SE23, SE22, SE4)
- Region
- Greater London
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Leave it or put it right?
If tiles are loose, regrouting alone is not the answer. We’ll tell you before we start, so you can decide what to do. On sound tiles, regrouting avoids the upheaval of a retile. In London conversions, one flat’s bathroom is often above another flat’s ceiling, and a slow leak from a failed seal can end up in the flat below. Putting it right early is much less trouble.
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
What you get with us
- Sanitary silicone with an anti-fungal additive in wet areas
- One-year guarantee on every job
- Over 20 years’ experience
- Approved under the ARBOMaster scheme
Read our cost guide and customer reviews.
Honor Oak: your questions answered
Is parking a problem for a job in Honor Oak?
It can be, so it helps to tell us about permits, visitor bays or off-street space when you book. The visit is then planned around what’s available.
Do you work for landlords with property near Honor Oak Park station?
Yes, we work for landlords and letting agents. You can ring 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before work begins.
How soon can the shower be used after regrouting?
We will tell you on the day. It depends on the grout and the sealant used, so follow the time we give you.
Can you do several jobs on one visit?
Yes, and it often makes sense. Combining jobs makes good use of the visit.
What goes in the corners, grout or silicone?
We use silicone in corners and along edges. Grout in a moving joint soon cracks.
How long does the job take?
Most jobs take a few hours, or longer for a fully tiled room, including preparation and clearing up. We’ll confirm how long when we quote.
Is the work guaranteed?
Our one-year guarantee covers every job.
What information do you need?
Let us know what needs doing and where. If we need more, we’ll ask.
The process
All our tools and materials come with us in the van, so there’s nothing for you to buy. After a quick look at the joints together, the area is protected and the work begins. It normally takes anything from a few hours to a full day, depending on the area. Many London jobs are in flats, so we come ready for stairs, narrow hallways and shared entrances. Mention any building rules, key holders or managing agents when you book.
- We check the tiles for any that are hollow or loose.
- We rake out the grout evenly, protecting the tile edges.
- We vacuum the joints so the new grout bonds.
- New grout is pressed into the joints and the tiles are cleaned.
- Silicone goes into the corners and along the edges.
Getting ready for the visit
- Keep pets and children clear of the area while we work
- Move anything stored near the joints
- Tell us about access, such as stairs, a lift or high-level joints
Get a quote
If you are in Honor Oak and need regrouting, phone 0345 464 0079 or send us an email. Tell us what the problem is and where, and you will get a clear quote before work begins.
Advice
Regrouting around Honor Oak
London has a lot of flats and conversions, and a failed shower or bath seal in one can show up on the ceiling below, which is why it’s worth fixing early. London has hard water, so limescale builds up on sealant, grout and fittings.
If you let a flat or house near Honor Oak Park station, clean grout and fresh sealant between tenancies make a bathroom look cared for again. For an older house near a landmark such as Church of St Augustine, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Honor Oak is about 2 miles south-west of New Cross, in Greater London. We carry out regrouting for homeowners, landlords and businesses in Honor Oak and the surrounding area, as part of our work across Greater London. Honor Oak is one of 764 places in Greater London we cover.
Our applicators cover all of the SE23, SE22 and SE4 postcode area for regrouting and the streets around it. We cover properties on Rye Road, Ewart Road and Bovill Road. Other places close to Honor Oak include Forest Hill (1 mile south), Brockley (1 mile east), Crofton Park (1 mile east), Nunhead (1 mile north) and Telegraph Hill (1 mile north). Larger places within reach include London (4 miles north-west), City of Westminster (6 miles north-west), Marylebone (6 miles north-west), Kensington (7 miles north-west), St Pancras (6 miles north-west) and Shoreditch (5 miles north).
Around Honor Oak
Locally, jobs take us to homes and businesses close to Allenby Tutorial Trust, Peckham Rye and Herne Tavern. There’s a railway station in Honor Oak itself: Honor Oak Park station. Well-known places in the area include Lewisham Shopping Centre (1.9 miles north-east) and Horniman Museum and Gardens (0.8 miles south-west). Not far away are One Tree Hill and Battersea Park Lake.
When it is not the sealant
We’ll always be straight with you, so here’s what sealant cannot fix:
- Loose tiles, which need refixing first
- Failed tanking or waterproofing under the tiles
- Tiles that are chipped or split
If you are not sure, just ring 0345 464 0079 or send us an email and we’ll give you a straight answer.
Surfaces we seal
- Kitchen splashbacks
- Wet rooms
- Shower walls
- Tiled floors
- Bathroom wall tiles
- Bathroom floors
Surface by surface
Corners and edges
Corners flex as the building moves, so they get silicone, not grout.
Wet rooms
Regrouting a wet room helps keep water on the surface of the tiles. It can’t fix waterproofing below the tiles.
Common problems we fix in Honor Oak
Soap scum and limescale build up on grout and stick to it. The grout beneath can stain and weaken, and at that point, new grout is the better answer.
Any of these means the joints need attention:
- Crumbling grout between the tiles
- Floor grout that has worn and darkened
- Grout in corners that has cracked
- A grout colour that no longer suits the room
Honor Oak is in London, so parking needs planning: let us know about parking bays, permits or a driveway.
Questions to ask before you book
- How long the guarantee is
- Is the old sealant removed completely?
- Are they insured?
- Whether you can choose the colour
Looking after it afterwards
So the new joints stay in good condition:
- Look at the sealant in the corners now and then
- Wipe water off the walls when you are done
- Have loose tiles looked at early
- Don’t use strong acidic cleaners on grout
Leave the area unused for as long as we advise, so it cures fully. After that, rinse the tiles after showering and keep the room ventilated.
Grout that stays dark after cleaning is starting to fail. Regrouting at this stage is straightforward while the tiles are still sound.
Nearby places to Honor Oak
More services for Honor Oak
DIY versus a professional finish
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.