Kent · England
Grove Green Regrouting
Regrouting in Grove Green from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Grout that makes sound tiles look old
- Grout washed out of a shower
- Kitchen splashback grout stained by grease
Why deal with it now?
Grouting over old grout rarely lasts. It sits thinly on top and soon flakes away, taking any repair with it. Removing the old grout to an even depth lets the new grout key in properly. Homes in smaller places like Grove Green can face more weather, and failed outside joints let damp into walls. Indoors, a failed seal lets water into floors and panels as it would anywhere.
A failed joint rarely gets cheaper to fix by waiting. If you’re not sure whether it needs doing, call 0345 464 0079 or send us an email and we will give you an honest view and a quote.
What you get with us
- Fully insured
- Trusted Arbo and Everbuild sealants
- Anti-fungal sanitary silicone in wet areas
- 4.9 on Google from 180+ five-star reviews
About our regrouting in Grove Green
Most regrouting jobs include resealing too. Grout is for the joints between tiles, but internal corners and edges flex, so they’re sealed with silicone rather than grout. Doing both at once leaves the whole area sound. We work on bathroom floors, tiled floors and kitchen splashbacks, and common reasons people get in touch are corners filled with grout instead of silicone and dirty, worn grout on a tiled floor.
Homes around Grove Green range from older cottages to more recent houses. In older homes, walls and floors can move a little more, so the right flexible sealant matters.
There’s a 12-month guarantee on every job, whatever its size.
- Location
- Grove Green (ME14)
- Wider area
- Kent
- Cover
- One year on every job
- Price
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Questions from Grove Green
Do you work for landlords with property near Bearsted station?
Yes, landlords and agents are among the people we work for. Just call 0345 464 0079 or email us with the address and what needs doing, and we’ll send you a clear quote.
Do you work for hotels and guest houses in Grove Green?
Yes, we work for hotels as well as homes and businesses. Rooms can be done a few at a time, so the building stays open.
How much does regrouting cost in Grove Green?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we will talk you through it.
Which products do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.
Can you regrout if a few tiles are loose?
Loose tiles need refixing before regrouting. We’ll point them out at the start.
How long does the job take?
A typical job takes a few hours for a shower enclosure, longer for a whole room, including preparation and clearing up. Your quote will say how long we expect yours to take.
Should corners be grouted or sealed?
Corners get silicone, not grout. They move slightly, and grout there cracks.
Are you an approved applicator?
Yes. We are an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
How the visit works
When we get to you, we check the joints match what you told us. If anything is different, we explain it before carrying on. After that, the work takes a few hours for a shower enclosure, longer for a whole room. For a job in Grove Green, we agree the time, the access and parking before the day. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- We agree the area to be regrouted and point out any loose tiles.
- We remove the old grout carefully.
- The joints are cleaned out and vacuumed.
- The new grout goes in, then the tile faces are cleaned.
- We renew the silicone at the corners and edges.
How to prepare
- Let us know about earlier repairs to the joints
- Keep children and pets away from the work area
- Mention any tricky access
Get a quote
We quote each job on its own, so start by telling us what you need. Simply ring 0345 464 0079 or drop us an email and describe the job and send pictures if you have them.
Advice
What affects the quote in Grove Green
There’s no set price list, because jobs vary so much. The quote depends on:
- Which sealant suits the joint
- Whether there’s mould to deal with
- How much there is to do
- How many areas need sealing
The cost depends on how much there is to do, how much old material has to come out and access to the work. We give a clear quote before work begins.
Asking for a quote
Photos by email are helpful but not essential. Try to tell us:
- The address or postcode of the job
- The type of property
- A few photos by email, if you can
- What’s wrong with the joints now
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is. When it suits you, phone 0345 464 0079 or send us an email.
How the job changes by surface
Bathroom floors
Regrouting a floor brightens the whole room. Floor-to-wall and bath joints are sealed, not grouted.
Wet rooms
Wet room grout and sealant need to be in good order. We replace the grout and reseal the edges.
Towns and villages near Grove Green
What else we do in Grove Green
What regrouting looks like in Grove Green
There are hotels and other places to stay in and around Grove Green. Hotel bathrooms are part of our work as well as homes, and can be done room by room. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Letting a property close to Bearsted station? Then a regrout while the flat is empty is quicker than working around a tenant.
Grove Green is about 1 mile east of Foley Park, in Kent. Whether you’re in the middle of Grove Green or further out, regrouting is available for homes and businesses alike. Grove Green is one of 922 places in Kent where we work for regrouting. We also work in London, around 32 miles away.
Postcode districts we cover here for regrouting: ME14. If you need regrouting at a property on New Cut Road, Hampton Road and Bargrove Road or anywhere close by, we can help. We also cover the places around Grove Green: Penenden Heath (1 mile west), Weavering (1 mile south-east), Foley Park (1 mile west), Harbourland (1 mile north-west) and Detling (1 mile north-east). Further out, we also cover Sittingbourne (9 miles north-east), Gravesend (13 miles north-west), Tonbridge (13 miles south-west), Faversham (15 miles east), Northfleet (14 miles north-west) and Minster (14 miles north-east).
What’s near Grove Green
In Grove Green, that means homes and buildings near Bell Inn, Valley Park School and Vinters Valley Park and the streets around them. The nearest railway station is Bearsted station, roughly 1.3 miles south-east of the centre. A little further out are KIMS hospital (under half a mile north-east) and Queen's Own Royal West Kent Regiment Museum (1.4 miles west). For a walk, there’s Burham Down and Detling Hill.
When it is not the sealant
Honest advice matters more to us than a booking, so here’s what sealant can’t fix:
- Movement in a stud wall or floor
- A leaking wet room membrane
- Tiles that are loose or hollow behind
If in doubt, phone 0345 464 0079 or send us an email and we will say what we think before booking.
Joints and surfaces we work on
- Wet rooms
- Shower walls
- Kitchen splashbacks
- Bathroom wall tiles
- Bathroom floors
- Tiled floors
When to call us in Grove Green
Most grout is porous, so it soaks up water, soap and dirt. Over time it stains, softens and starts to crumble and showers that get daily use suffer most.
If you can see any of these, it’s time to have the joints looked at:
- Crumbling grout between the tiles
- Shower grout that has worn away
- Floor grout that has worn and darkened
- Greasy, stained grout behind the hob
If you live in an older home near Church of St Luke, walls and floors in older homes can move, and sealant and grout show it first.
What your quote should include
- What happens if the job turns out different
- Who does the work, and how experienced they are
- How long to leave it before use
- How the colour is chosen
Can I do it myself?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so just mention it when you contact us.