Kent · England
Regrouting in Bearsted, Kent
Regrouting across Bearsted and nearby, with old sealant always removed completely and a 12-month guarantee.
- Floor grout that has worn and darkened
- Old grout in a dated colour
- Splashback grout that has darkened
How we handle regrouting in Bearsted
Our applicators rake out the old grout to an even depth, taking care not to chip the tile edges. The joints are then vacuumed, regrouted and cleaned off, with silicone renewed in the corners. We work on tiled floors, wet rooms and bathroom floors, and people most often call us about grout washed out of a shower and greasy, stained grout behind the hob.
Homes around Bearsted range from older cottages to more recent houses. Older homes can move a little with the seasons, which is hard on tired sealant and rigid grout.
Every job comes with our one-year guarantee.
- Location
- Bearsted (ME14, ME15)
- Region
- Kent
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
What sealant work can’t fix
In fairness, there are a few things sealant won’t fix:
- A structure that flexes behind the tiles
- A leaking wet room membrane
- Loose tiles, which need refixing first
If in doubt, call 0345 464 0079 or drop us an email and we’ll say what we think.
What we seal
- Tiled floors
- Bathroom floors
- Bathroom wall tiles
- Kitchen splashbacks
- Shower walls
- Wet rooms
Common questions in Bearsted
Do you work for landlords with property near Bearsted station?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before work begins.
Is Bearsted within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
How long will you be here?
It depends on the size of the job, but most jobs take anything from a few hours to a full day, depending on the area. We’ll give you a better idea when we quote.
Where are you based?
We are a Crawley-based firm, with over 20 years’ experience. We work across South East England, London and Scotland.
Will you leave a mess?
Tidy work is part of the job. We protect what’s around the joints.
What guarantee comes with the work?
Our one-year guarantee applies to all our work, and we are fully insured.
Can you regrout just the shower?
Yes. A lot of our jobs are only the shower, or just the joints that have failed.
Is it worth trying it myself?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. If it does not work out, we can redo it.
What affects the cost of regrouting
Some jobs are bigger than they look, and some smaller. The main factors:
- Working hours on commercial sites
- Access and height
- Which sealant suits the joint
- The number of rooms or windows
We do not show prices on the website, because each job is priced on what it involves. For a quick quote, please ring 0345 464 0079 or drop us an email.
Helping us quote
Before you ask for a quote, have a think about:
- The type of property
- The rough size of the job
- A few pictures by email, if you can
- Any access issues, like height or stairs
There’s no standard price list, because every job is different. Instead, your job gets its own clear quote. To get started, phone 0345 464 0079 or drop us an email.
How the job changes by surface
Corners and edges
The joint between tiles and a bath, tray or worktop gets silicone. Grout in that joint wouldn’t last.
Bathroom wall tiles
Tiles away from the shower stay drier but still stain and crack. Regrouting brings them back in line.
Towns and villages near Bearsted
More services for Bearsted
Bathrooms and kitchens in Bearsted
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Letting a property close to Bearsted station? Then clean grout and fresh sealant between tenancies make a bathroom look cared for again. Schools such as Thurnham Church of England Infant School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s. Homes close to Holy Cross Church include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Bearsted is about 2 miles east of Maidstone, in Kent. Whether you are in the middle of Bearsted or further out, we cover regrouting for every kind of property. Our area takes in 922 places across Kent, from the larger towns to small villages. Our Chelmsford page covers work nearby (32 miles or so).
We work across the ME14 and ME15 postcode area for regrouting and the streets around it. Whether your property is on The Street, Tower Lane and Roseacre Lane or a nearby road, our applicators can take on the job. Close by, we work in Weavering (1 mile west), Grove Green (1 mile north-west), Caring (1 mile south-east), Thurnham (1 mile north-east) and Willington (2 miles south-west). Within a short drive, we also cover Sittingbourne (9 miles north-east), Gravesend (14 miles north-west), Tonbridge (14 miles west), Faversham (14 miles east), Northfleet (15 miles north-west) and Minster (14 miles north-east).
Near you in Bearsted
We work in homes and buildings around Mote Park, Valley Park School and The Kentish Yeoman pub, among other places. Bearsted has its own railway station: Bearsted station. A little further out are KIMS hospital (1.2 miles north-west) and The Mall Maidstone (2 miles west). Not far away are Detling Hill.
What happens if it’s left?
Grouting over old grout rarely lasts. It sits thinly on top and soon flakes away. Raking out to a consistent depth gives the new grout something to hold. Homes in smaller places like Bearsted can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. You’ll know the price before we begin.
Why Bearsted customers choose us
- Experience in homes, commercial sites and hotels
- 20+ years of sealant experience
- Trusted Arbo and Everbuild sealants
- Every job guaranteed for a year
Take a look at what affects the cost and our reviews.
What happens on the day
Most of a good job is in the preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours for a shower enclosure, longer for a whole room. In a smaller place like Bearsted, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- We check the tiles are sound and flag any that are loose or hollow.
- We rake out the old grout to an even depth, taking care of the tile edges.
- Dust and debris are vacuumed out of every joint.
- We fill the joints with new grout, then clean the tiles.
- We reseal the internal corners and edges with silicone.
Before we arrive
- Let us know about earlier repairs to the joints
- Try not to wet indoor joints just before the visit
- On commercial sites, let us know about site rules
Ask for a quote
To get a quote, call 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You will have a clear quote before we start.
Advice
Aftercare tips
So the new joints stay in good condition:
- Wipe water off the walls when you are done
- Don’t ignore a tile that feels loose
- Skip wire brushes and scourers
- Give the walls a quick rinse after use
We’ll tell you when the area can be used again. Please follow it, and avoid scrubbing the new grout hard for the first few days.
Grout that’s washing out of a shower shouldn’t be left. Every shower pushes more water into the gaps and it can end up in the wall or the ceiling below.
DIY versus a professional finish
A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.