North Ayrshire · Scotland
Regrouting in Fergushill, North Ayrshire
Problem with your tiled areas in Fergushill? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.
- Cracked or crumbling grout lines
- Dirty, worn grout on a tiled floor
- Gaps where the shower grout has gone
Regrouting in Fergushill, done properly
We take the old grout out to a consistent depth, taking care not to chip the tile edges. After vacuuming, new grout goes in and the tiles are wiped clean, and the corners get fresh silicone. We work on shower walls, bathroom floors and bathroom wall tiles, and the jobs we see most are good tiles let down by tired grout and shower grout that has worn away.
For a place like Fergushill, the job is the same as anywhere: old material out, joints cleaned and dried, and a fresh, even finish. The journey and access are simply planned in advance.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we will sort it.
- Location
- Fergushill (KA13)
- Region
- North Ayrshire
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026

Surface by surface
Bathroom floors
Cracked floor grout can point to movement underneath. We look for loose tiles first.
Wet rooms
Wet rooms have water across the floor, so good grout is important. We check the tiles first.
Also near Fergushill
What else we do in Fergushill
Do you need regrouting in Fergushill?
When tiles or the wall behind them move, the grout cracks. That can be a loose tile, a flexing floor or a stud wall, which is why we check the tiles first.
These are the problems we are asked about most:
- Good tiles let down by tired grout
- Crumbling grout between the tiles
- Shower grout that has worn away
- Corners filled with grout instead of silicone
Schools such as Irvine Royal Academy are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Comparing quotes
- Are they insured?
- When the joint can take water or movement
- How long the guarantee is
- Whether they seal over old material or remove it
Aftercare tips
How long the joints last depends on use and care. Here’s what we suggest:
- Give the walls a quick rinse after use
- Have loose tiles looked at early
- Do not use strong acidic cleaners on grout
- Clean with a soft brush, not anything metal
Use a gentle cleaner on the grout and a soft brush. Avoid neat bleach and strong acid descalers, as they can break grout down.
Once grout cracks, it tends to get worse. Water gets behind the tiles, and they can begin to come away, so regrouting early can save a retile.
Your questions about regrouting in Fergushill
Will you come out to Fergushill?
Yes. Fergushill is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Just mention lanes, gates or anything else about the route when you book.
Do you cover Fergushill for regrouting?
Yes, Fergushill is within the area we cover. Our work covers the whole of Scotland. You can send an email to info@mrmastic.co.uk and let us know what needs doing, and we will give you a clear quote.
How long should I wait before showering?
We give you a time before we leave. The wait depends on the products and conditions, so follow the time we give you.
What should I tell you?
A short description and the location. If we need more, we will ask.
Can you regrout if a few tiles are loose?
Loose tiles need refixing before regrouting. We will point them out before any grout comes out.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Will there be a smell?
It depends on the product. Some products have a noticeable smell, others very little.
Do you work for letting agents?
Yes. We work for householders, landlords, letting agents, businesses and hotels across North Ayrshire.
DIY versus a professional finish
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
What affects the cost of regrouting
There’s no set price list, because no two jobs are the same. The quote depends on:
- The product the joint needs
- The number and length of the joints
- Working hours on commercial sites
- Access and height
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
What we need to know
Photos by email are helpful but not essential. Please mention:
- Photos by email, if that is easy
- How we’d reach the joints
- Where the property is
- If it’s domestic, commercial or a hotel
Need a quote? Please email us at info@mrmastic.co.uk with a few details. You will know what we plan to do, and what it will cost, before any work begins.
Bathrooms and kitchens in Fergushill
In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
Letting a property close to Kilwinning station? Then clean grout and fresh sealant between tenancies make a bathroom look cared for again.
Fergushill is about 2 miles east of Kilwinning, in North Ayrshire. Wherever you are in the KA13 postcode area, our applicators can take on regrouting. Our area takes in 53 places across North Ayrshire, large and small. There’s also a page for Glasgow, roughly 20 miles from Fergushill.
We work across KA13 for regrouting. Close by, we work in Benslie (1 mile south-east), Lawthorn (2 miles south-east), Perceton (2 miles south-east), Irvine (2 miles south) and Girdle Toll (3 miles south). Further out, we also cover Saltcoats (5 miles west), Largs (13 miles north-west), Ardrossan (6 miles west), Stevenston (4 miles west), Kilbirnie (7 miles north) and West Kilbride (8 miles west).
Local landmarks in Fergushill
Fergushill’s nearest station is Kilwinning station, roughly 2.2 miles west of the centre. A little further out are Kilwinning Heritage Centre (1.7 miles west) and Eglinton Castle (1 mile south-west). Open spaces near Fergushill include Stevenston Loch.
What we cannot put right
It helps to know what we cannot do:
- Loose tiles, which need refixing first
- Damaged tiles that need replacing
- A structure that flexes behind the tiles
If in doubt, email us at info@mrmastic.co.uk and we will say what we think before you book.
Surfaces we seal
- Bathroom floors
- Kitchen splashbacks
- Shower walls
- Bathroom wall tiles
- Wet rooms
- Tiled floors
What we do, step by step
Before we leave, we go over the finished joints with you and tell you how long to leave it. The work normally takes anything from a few hours to a full day, depending on the area, depending on the size of the job. Outdoor work around Fergushill depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Work indoors isn’t affected.
- First, we check for loose or hollow tiles and point out any we find.
- The old grout comes out to a consistent depth, without damaging the tiles.
- We vacuum the joints and clean out the dust.
- Fresh grout goes into the joints and the tile faces are wiped clean.
- We reseal the internal corners and edges with silicone.
How to prepare
- Mention any tricky access
- Keep pets and children clear of the area while we work
- For business premises, tell us about site rules or sign-in
How to get a quote
To get a quote, send an email to info@mrmastic.co.uk and tell us where the job is and what the problem looks like. We will give you a clear quote before any work starts.
