Kent · England
Densole Regrouting
Our applicators work in Densole on raking out old, cracked or stained grout and regrouting tiled walls and floors. Old material cut out, joints cleaned and sealed neatly.
- Splashback grout that has darkened
- Grout in corners that has cracked
- Gaps where the shower grout has gone
Surface by surface
Corners and edges
Edges are resealed while we are there, so everything is renewed at once.
Kitchen splashbacks
Grout behind the hob and sink works hard. We renew the grout and the worktop sealant.
Regrouting in Densole, done properly
Our applicators rake out the old grout to an even depth, taking care not to chip the tile edges. After vacuuming, new grout goes in and the tiles are wiped clean, and the corners get fresh silicone. Common call-outs are for crumbling grout between the tiles and floor grout that has worn and darkened, on bathroom wall tiles, wet rooms and tiled floors.
In a village or hamlet like Densole, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
A 12-month guarantee comes as standard, so you’re covered after we’ve gone.
- Where
- Densole (CT18)
- Wider area
- Kent
- Guarantee
- 12 months on all our work
- Quote
- A clear price before work begins
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
How the visit works
All our tools and materials come with us in the van, so there’s nothing for you to buy. After a quick look at the joints together, the area is protected and the work begins. It normally takes anything from a few hours to a full day, depending on the area. For a village or hamlet like Densole, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First we agree what’s being done and flag any loose tiles.
- Grout is raked out without chipping the tiles.
- The joints are cleaned out and vacuumed.
- The new grout goes in, then the tile faces are cleaned.
- Internal corners and edges are resealed.
Preparing for the visit
- Mention any tricky access
- Clear the area around the work
- Tell us if parking is tricky
Ask for a quote
Want a quote for regrouting? Please ring 0345 464 0079 or send us an email with a few details. You will know what we plan to do, and what it will cost, before any work begins.
Related advice
Why it’s worth doing now in Densole
Once grout cracks, water can get behind the tiling. Left alone, that water can loosen tiles or damage the wall, which turns a regrout into a retile. Dealing with it now keeps it small. In a small place like Densole, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.
What you get with us
- Approved under the ARBOMaster scheme
- Over 20 years’ experience
- Rated 4.9 stars on Google
- Neat joints and a tidy finish
Your questions about regrouting in Densole
Will you come out to Densole?
Yes, Densole is covered. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
I let a flat near Folkestone West station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just phone 0345 464 0079 or send us an email with the address and what needs doing, and we will send you a clear quote.
Is it possible to regrout only the shower area?
Yes. Many jobs are just the shower walls, or just the joints that have failed.
Do you hold any approvals?
Yes. We are approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.
What do you put in the joint?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We explain the product when we quote.
What information do you need?
Tell us what needs doing and where, plus photos if you have them. We’ll ask anything else we need to know.
Does someone need to be in?
Access is agreed with you when the job is booked. Indoors, that usually means someone at home.
How long does regrouting take?
A typical job takes anything from a few hours to a full day, depending on the area, including the preparation. Your quote will say how long we expect yours to take.
Towns and villages near Densole
What else we do in Densole
Work for landlords, hotels and businesses
If you manage several properties in or around Densole, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs.
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
How to look after the new joints
Once the sealant has cured, a few habits help it last:
- Stick to mild products for cleaning grout
- Use a soft brush rather than a wire one
- Have loose tiles looked at early
- Keep harsh bleach and acid cleaners off the grout
Clean the grout with a mild bathroom cleaner and a soft brush. Keep harsh bleach and acid limescale removers away from it, as they can break grout down.
Fixing grout early is a small job. Left, the same problem can let water through so it’s worth dealing with as soon as you spot it.
What affects the cost of regrouting
Your quote is based on your job. We look at:
- The number and length of the joints
- How many rooms, windows or areas are involved
- Whether the work is at height
- Mould in or behind the old joints
Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference.
Helping us quote
You do not need to know the technical terms. Just tell us:
- The problem you’ve noticed
- A few pictures by email, if you can
- How many joints, rooms or windows are involved
- The address or postcode of the job
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. When it suits you, call 0345 464 0079 or send us an email.
Do you need regrouting in Densole?
Poor ventilation keeps grout damp, giving mould a place to grow. Black marks that come back after cleaning are often in the grout itself.
Any of these means the joints need attention:
- Grout stained black or orange that won’t clean
- Greasy, stained grout behind the hob
- Grout that is cracking and breaking up
- Floor grout that has worn and darkened
Homes close to St Luke's include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.
What your quote should include
- When the joint can take water or movement
- Whether VAT is included
- What product goes in the joint
- How the joint is cleaned and prepared
Regrouting in Densole: local notes
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Schools such as Hawkinge Primary School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s. If you let a flat or house near Folkestone West station, a regrout while the flat is empty is quicker than working around a tenant.
Densole is about 3 miles north of Folkestone, in Kent. Densole gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Densole is one of 922 places in Kent we cover for regrouting. Chelmsford is on our list too, around 51 miles away.
All of CT18 is within our area for regrouting. Streets in the area include St John's Close, St John's Way and Canterbury Road, all of which we cover. We also cover Hawkinge (1 mile south), Swingfield Minnis (1 mile north), Old Hawkinge (2 miles south-east), Arpinge (2 miles south-west) and Selsted (2 miles north). Within a short drive, we also cover Ashford (13 miles west), Canterbury (11 miles north), Dover (6 miles east), Folkestone (3 miles south), Deal (12 miles north-east) and Hythe (5 miles south-west).
Local landmarks in Densole
Densole’s nearest station is Folkestone West station, about 3.1 miles south. Nearby you will also find Elham Valley Countryside Centre And Railway Museum (2.7 miles south-west) and Folkestone Castle (2.1 miles south). Not far away are Cheriton Hill.