Kent · England
Glazing Silicone in Densole
We cover Densole for glazing silicone for conservatories, rooflights, glass panels and shower screens. Old material cut out, joints cleaned and sealed neatly and a 12-month guarantee.
- A quick top-up bead that didn’t last
- Water running down inside the glass
- Glazing silicone that has cracked or come away
What the job involves on each surface
Rooflights
Rooflight leaks can come from the sealant or the roof. We find the cause first.
Glass-to-frame joints
The sealant must stick to glass and frame alike. We choose a product that suits both.
How we handle glazing silicone in Densole
Our work covers conservatory joints, rooflights and glass panels plus shower screens and the bases of glass balustrades. Each joint is cut out, cleaned and resealed. Typical jobs include mouldy sealant around glass panels and split or lifting silicone on glass, on glass balustrade bases, rooflights and glass-to-frame joints.
In a village or hamlet like Densole, older cottages and farmhouses often have timber windows set in stone or brick. Older buildings like these do not always suit modern silicone, and sometimes a traditional sand mastic is the better choice.
You are covered for a year from the day we finish. If anything isn’t right with it, phone 0345 464 0079 or drop us an email.
- Location
- Densole (CT18)
- Wider area
- Kent
- Cover
- One year on every job
- Price
- A clear price before work begins
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Glazing silicone in Densole: local notes
Historic houses like Acrise Place (about 1.2 miles north-west) are a reminder that the area around Densole has older buildings as well as new. In older buildings, older timber frames in brick or stone need a different approach from a modern uPVC window. Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
If you let a flat or house near Folkestone West station, a shower screen or conservatory joint that leaks is easier to reseal while the property is empty. For site and facilities teams at buildings such as Hawkinge Primary School, its window and door frames need their mastic kept sound, just like a home’s. For an older house near a landmark such as St Luke's, the joint between an old wall and a newer frame is usually the first place rain gets in.
Densole is about 3 miles north of Folkestone, in Kent. Jobs in Densole get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Our Kent coverage runs to 922 places, and Densole is one of them. For nearby work, see our Chelmsford page (51 miles or so).
Here we cover the CT18 postcode area for glazing silicone. We cover properties on St John's Close, St John's Way and Canterbury Road and the roads around them. Neighbouring places we cover for glazing silicone include Hawkinge (1 mile south), Swingfield Minnis (1 mile north), Old Hawkinge (2 miles south-east), Arpinge (2 miles south-west) and Selsted (2 miles north). Larger places within reach include Ashford (13 miles west), Canterbury (11 miles north), Dover (6 miles east), Folkestone (3 miles south), Deal (12 miles north-east) and Hythe (5 miles south-west).
Near you in Densole
Densole’s nearest station is Folkestone West station, about 3.1 miles south. Well-known places in the area include Elham Valley Countryside Centre And Railway Museum (2.7 miles south-west) and Folkestone Castle (2.1 miles south). Green spaces nearby include Cheriton Hill.
How to look after the new joints
To keep the joints looking good and working properly:
- Inspect the sealant on glazing annually
- Keep air moving in the conservatory
- Run a squeegee over the glass when you are done
- Avoid scraping close to the bead
On shower screens, wipe or squeegee after use and keep the room ventilated. That slows mould growth on the bead.
Don’t leave lifting or mouldy silicone on glazing. Peeling silicone lets water in behind and the problem grows.
Places near Densole
Other services in Densole
How the visit works
We work through the job in order: protection first, then preparation, sealing and a tidy-up. For most jobs that takes anything from an hour or two to most of a day, depending on the size of the job. Somewhere like Densole needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We find where water is getting in and check whether it’s a sealant joint.
- We cut out the failed silicone, taking care of the glass and frame.
- The glass and frame are cleaned and degreased.
- We apply a neutral-cure glazing silicone and tool it smooth.
- We check the joints and, where safe, run water over them.
Preparing for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Try not to wet indoor joints just before the visit
- Move anything stored near the joints
Getting a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Advice
Why deal with it now?
You do not need new glazing because the sealant has gone. Sound glass and frames usually just need resealing. Around Densole, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs. Ask us for a quote and we will explain what it covers.
Why choose Mr Mastic in Densole
- Domestic, commercial and hotel work
- Full insurance on every job
- 20+ years of sealant experience
- Neat joints and a tidy finish
Take a look at how sealant jobs are priced and our reviews.
What we cannot put right
To be straight with you, there are a few things sealant will not fix:
- A sealed unit that has misted inside
- Water coming through the roof rather than a sealant joint
- A frame that needs repairing or replacing
If you’re not sure, just phone 0345 464 0079 or drop us an email and we will give you a straight answer before you book.
Joints and surfaces we work on
- Glass-to-frame joints
- Rooflights
- Shower screens
- Glass-to-glass joints
- Glass balustrade bases
- Conservatory frames
Densole questions
Is Densole within the area you cover?
Yes, Densole is covered. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Is Densole in your area for glazing silicone?
Yes. We work across London and the South East, and Densole is part of that. You can phone 0345 464 0079 or email us and tell us what needs doing.
Can landlords and businesses book you?
Yes, regularly. We can quote for several properties at once.
Is balustrade sealant something you do?
Yes, where the base is finished with sealant. Photos help us see what’s there.
Can you match the sealant colour?
We help you choose a colour that suits, from white and clear to greys and other shades. The product needed can limit the range.
How much does glazing silicone cost in Densole?
We don’t publish prices, because the cost depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
Is there any odour?
Possibly a little. It fades as the sealant cures.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
Quotes for glazing silicone in Densole
Jobs vary more than people expect. What affects the quote:
- Working hours on commercial sites
- How easy the joints are to reach
- How many rooms, windows or areas are involved
- Which sealant suits the joint
The cost depends on how much there is to do, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before any work starts, so you know where you stand.
What we need to know
There’s no need for technical detail. It helps if you can tell us:
- Any access issues, like height or stairs
- Photos by email, if that is easy
- The problem you’ve noticed
- Whether it has been sealed before
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll explain what’s involved before giving you a price.
DIY versus a professional finish
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.