Kent · England

Regrouting in Daniel's Water

Problem with your tiled areas in Daniel's Water? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.

  • Grout stained black or orange that won’t clean
  • Dirty, worn grout on a tiled floor
  • Kitchen splashback grout stained by grease

Need regrouting in Daniel's Water?

About our regrouting in Daniel's Water

Grout fills the gaps between tiles, and sealant is what goes along the bath, tray or worktop. Once grout starts to crack or wash away, water has a way in behind the tiling. We rake it out and replace it and renew the silicone at the edges. If you are dealing with grout in corners that has cracked and good tiles let down by tired grout, we can put it right, on tiled floors, kitchen splashbacks and wet rooms alike.

Homes around Daniel's Water are mostly houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.

We stand behind the work with a 12-month guarantee, so you are covered after we’ve gone.

Applicator in a navy top running a bead of silicone up a shower screen wall profile
Place
Daniel's Water (TN26)
Region
Kent
Guarantee
One year on every job
Quote
A clear price before any work starts
Call
0345 464 0079
Last updated
26 October 2026

When something else is needed

We’ll always be straight with you, so here’s what sealant cannot fix:

  • A structure that flexes behind the tiles
  • Tiles that have come away from the wall
  • A leaking wet room membrane

Not sure which it is? You can ring 0345 464 0079 or send us an email and we’ll tell you honestly before booking.

What we seal

  • Bathroom wall tiles
  • Bathroom floors
  • Kitchen splashbacks
  • Wet rooms
  • Shower walls
  • Tiled floors

Should I try it myself first?

Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.

Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

How the visit works

When we get to you, we check the joints match what you told us. If anything is different, we explain it before carrying on. Most jobs then take a few hours, or longer for a fully tiled room. Somewhere like Daniel's Water needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.

  1. We check the tiles are sound and flag any that are loose or hollow.
  2. We rake out the old grout to an even depth, taking care of the tile edges.
  3. We vacuum the joints and clean out the dust.
  4. We fill the joints with new grout, then clean the tiles.
  5. We reseal the internal corners and edges with silicone.

Getting ready for the visit

  • Keep children and pets away from the work area
  • Let us know if you’ve seen damp or leaks
  • On commercial sites, let us know about site rules

How to get a quote

Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll explain how we’d tackle it. Whenever you’re ready, call 0345 464 0079 or drop us an email.

Ask for a quote

Related advice

Questions from Daniel's Water

Can you do regrouting in Daniel's Water?

Yes. We work across London and the South East, and Daniel's Water is part of that. You can call 0345 464 0079 or drop us an email and tell us what needs doing.

I let a flat near Pluckley station. Can you help?

Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can ring 0345 464 0079 or drop us an email with the details for a clear quote.

Will you leave a mess?

We keep the work tidy. Nearby surfaces are protected, and we clear up when we are done.

How long does regrouting take?

That depends on how much there is to do, but as a guide it takes anything from a few hours to a full day, depending on the area. We will tell you when we quote.

Can you regrout just the shower?

Yes. Many jobs are just the shower walls, or the area where the grout has gone.

Can you do several jobs on one visit?

Of course. Combining jobs makes good use of the visit.

Where is Mr Mastic based?

Our base is Crawley. Our area covers South East England, London and Scotland.

Will the sealant be renewed as well as the grout?

Yes, in most cases. Fresh grout next to old, mouldy silicone would look odd and could still leak.

When to call us in Daniel's Water

When tiles or the wall behind them move, the grout cracks. That can be a loose tile, a flexing floor or a stud wall, which is why we check the tiles first.

These are the problems we’re asked about most:

  • Dirty, worn grout on a tiled floor
  • Stained grout that cleaning will not shift
  • A grout colour that no longer suits the room
  • Grout that is cracking and breaking up

In and around Daniel's Water, as anywhere, good regrouting starts with a clean, dry, properly prepared joint.

Before you book anyone

  • How the joint is cleaned and prepared
  • Is VAT in the price?
  • How much experience the applicator has
  • How hidden problems are handled

10 questions to ask before booking

Why it’s worth doing now in Daniel's Water

Cracked grout lets water behind the tiles. Left alone, that water can loosen tiles or damage the wall, and then you are looking at retiling. Dealing with it now keeps it small. Older cottages and farmhouses around Daniel's Water can have timber floors and frames, and water through a failed joint can rot timber if it’s left.

Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.

Why choose Mr Mastic in Daniel's Water

  • Approved under the ARBOMaster scheme
  • We never seal over old sealant
  • Full insurance on every job
  • Domestic, commercial and hotel work

Take a look at what affects the cost and customer reviews.

Different surfaces, different methods

Shower walls

Showers put more water on grout than anywhere else. We rake it out and regrout and renew the silicone at the edges.

Bathroom wall tiles

Splash areas around basins and baths stain first. We can regroute just those areas or the whole wall.

Regrouting around Daniel's Water

Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

Letting a property close to Pluckley station? Then clean grout and fresh sealant between tenancies make a bathroom look cared for again.

Daniel's Water is about 3 miles west of Ashford, in Kent. Our applicators cover regrouting for homes and businesses in Daniel's Water and the surrounding area, as part of our work across Kent. Our Kent coverage runs to 922 places, and Daniel's Water is one of them. Crawley is on our list too, about 43 miles from Daniel's Water.

All of TN26 is covered for regrouting, from the main roads to the quietest streets. Neighbouring places we cover for regrouting include Fleeden (1 mile south), Chilmington Green (1 mile south-east), Great Chart (1 mile east), Godinton (2 miles north-east) and Hothfield (2 miles north). Further out, we also cover Maidstone (15 miles north-west), Ashford (3 miles east), Sittingbourne (14 miles north), Faversham (13 miles north), Hythe (13 miles east) and Davington (13 miles north).

Landmarks near Daniel's Water

Around Daniel's Water, our work takes us to homes and buildings near Ashford Community Woodland and the streets around them. For rail, the closest station is Pluckley station, about 2.6 miles north-west of the centre. Other landmarks nearby include County Square (3.1 miles east) and Romden Castle (3.9 miles west). Green spaces nearby include Orlestone Forest.

Map of Daniel's Water © OpenStreetMap contributors

Aftercare tips

To keep the joints looking good and working properly:

  • Use a squeegee on the tiles after showering
  • Avoid neat bleach and strong acid descalers on grout
  • Rinse the tiles after showering
  • Don’t ignore a tile that feels loose

If a tile starts to feel loose, get it looked at early. A loose tile cracks the grout around it and open a path for water.

Stains that won’t clean are a sign the grout is breaking down. Regrouting at this stage is straightforward, before the joints open up.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job