Kent · England
Bathroom & kitchen resealing in Daniel's Water, Kent
Bath, shower, basin, wet room, worktop and sink resealing in Daniel's Water, with a 12-month guarantee on every job. Call for a quick quote.
- Water getting behind the kitchen upstand
- Leaking joints on a shower screen
- Smears of silicone across the tiles
Bathroom resealing in Daniel's Water, done properly
A fresh bead of silicone changes how a bathroom looks more than most people expect. Black, patchy sealant makes clean tiles look tired, and a neat new joint puts that right in a short visit. It also seals the gaps that let water behind the bath. Common call-outs are for sealant that has split, shrunk or peeled away and shrunken sealant along the back of a worktop, across basins & vanity units, kitchen worktops & upstands and wet rooms.
Homes around Daniel's Water are mostly houses and cottages rather than flats. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
Our work is backed for twelve months, in Daniel's Water and everywhere else we cover.
- Place
- Daniel's Water (TN26)
- Region
- Kent
- Cover
- 12 months on all our work
- Quotes
- A clear price before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Daniel's Water questions
Is Daniel's Water within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Is Daniel's Water in your area for bathroom resealing?
Yes, Daniel's Water is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or send us an email and let us know what needs doing.
Can you get rid of the black mould in my sealant?
Yes, by replacing the sealant. Cleaning products may lighten it, but the lasting fix is new anti-fungal silicone on a clean, treated joint. Airing the room well helps stop it returning.
When can I use the bath or shower again?
After around 24 hours in most cases. You will get the exact cure time before we leave.
Is it OK to put new sealant on top of the old bead?
No, never. A bead laid over old silicone soon starts to come away. We remove the old bead completely before resealing.
Do you have insurance?
Yes. We are fully insured for domestic and commercial work.
Will there be a smell?
It depends on the product. Some products have a noticeable smell, others very little, and any smell fades as they cure.
How long does it take to reseal a bath or shower?
A single bath or shower takes about a couple of hours, old sealant removal included. A full bathroom and kitchen can take most of a day.
Looking after it afterwards
A little care helps the new joints last. We recommend:
- Avoid abrasive pads on the sealant
- Keep bottles off the sealant line
- Look for lifting corners and small gaps now and then
- Run the extractor fan during and after every shower
In a kitchen, do not let water sit along the back of the worktop and keep hot pans away from the silicone. The drier the joint stays, the longer it lasts.
A split bead lets water through every time the bath or shower is used. Over time that water reaches floors, walls and ceilings. Resealing early stops it.
How the job changes by surface
Shower trays & enclosures
Shower trays are sealed to the wall, and enclosures are sealed to the tray and tiles. Both take water every day, so each is cut out and renewed with anti-fungal sanitary silicone.
Baths
Acrylic baths give a little under load, while steel and cast iron baths move less but still settle when full. Loading the bath with water before sealing allows for it.
Bathroom resealing around Daniel's Water
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In and around Daniel's Water, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
Daniel's Water is about 3 miles west of Ashford, in Kent. We carry out bathroom resealing for homeowners, landlords and businesses in Daniel's Water and nearby. Daniel's Water is one of 922 towns and villages in Kent where we work for bathroom resealing. Crawley is on our list too, about 43 miles from Daniel's Water.
All of TN26 is covered for bathroom resealing. We also cover Fleeden (1 mile south), Chilmington Green (1 mile south-east), Great Chart (1 mile east), Godinton (2 miles north-east) and Hothfield (2 miles north). Larger places within reach include Maidstone (15 miles north-west), Ashford (3 miles east), Sittingbourne (14 miles north), Faversham (13 miles north), Hythe (13 miles east) and Davington (13 miles north).
What’s near Daniel's Water
We work in homes and buildings around Ashford Community Woodland, among other places. For rail, the closest station is Pluckley station, about 2.6 miles north-west of the centre. Nearby you’ll also find County Square (3.1 miles east) and Romden Castle (3.9 miles west). Not far away are Orlestone Forest.
Why act early in Daniel's Water
A failed joint gets more costly to put right the longer it’s left. Once water is behind the bath, it can reach floorboards, panels and the ceiling underneath, and that’s a far bigger job than a reseal. Where a wall is exposed, as many are in small places like Daniel's Water, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Combining jobs into one visit generally makes better use of the time than several visits. We’ll give you a clear quote for the lot.
Why us?
- Sealant colour chosen to suit
- We never seal over old sealant
- Anti-fungal silicone where joints get wet
- White, clear, grey or coloured to suit, where the product allows
See what affects the cost and our reviews.
Do you need bathroom resealing in Daniel's Water?
Not every tube in the shop is meant for a shower. Decorators’ caulk and all-purpose sealants are not made for constant wetting, so they stain, crack or go mouldy before long. A bathroom joint needs anti-fungal sanitary silicone.
Keep an eye out for any of the following:
- Leaks into the floor or ceiling below
- Leaking joints on a shower screen
- A messy, uneven bead from a previous reseal
- Splits where the tray meets the wall
If you let a flat or house near Pluckley station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Comparing quotes
- How long the guarantee is
- When the joint can take water or movement
- Is the old sealant removed completely?
- Are they insured?
Work for landlords, hotels and businesses
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a one-year guarantee.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
Places near Daniel's Water
Also in Daniel's Water
What we do, step by step
There’s no need to move everything out before we come, just the space around the work. We protect the rest, and the work takes a morning or an afternoon for most single baths and showers for a typical job. Somewhere like Daniel's Water needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- First the area is protected and every bit of old sealant removed, including the film left on the tiles.
- We clean and degrease the joint and treat any mould.
- We let it dry fully and fill the bath with water before sealing.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- We clear away and tell you when it can get wet, usually after around 24 hours.
Getting ready for the visit
- Mention any parking rules near the property
- For business premises, tell us about site rules or sign-in
- Mention if the joints have been sealed before
How to get a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will explain how we’d tackle it. When it suits you, ring 0345 464 0079 or send us an email.
Read more
What affects the cost of bathroom resealing
Your quote is based on your job. We take into account:
- How many areas need sealing
- The type of sealant required
- When we can work, for business premises
- Whether old sealant or filler has to be cut out
What you pay reflects the work, not guesswork. That is why we ask a few questions first and agree the price before starting.
What we need to know
You don’t need to know the technical terms. Just tell us:
- What’s wrong with the joints now
- How many joints, rooms or windows are involved
- If someone has resealed it before
- Where the property is
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.