Kent · England
Fire Rated Sealant in Daniel's Water
Our applicators work in Daniel's Water on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old sealant removed completely, joints prepared properly.
- Cracked or shrunken fire-rated sealant
- Standard silicone or caulk in a fire-stopping gap
- Open holes round services passing through fire walls
Fire rated sealant in Daniel's Water, done properly
Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. We apply intumescent and fire-rated sealants to the manufacturer’s tested details for each gap, and we can record what went where. We work on service penetrations, flats & HMOs and plasterboard & masonry, and common reasons people get in touch are damaged fire sealant left by other trades and door frames with gaps between frame and wall.
Somewhere as small as Daniel's Water, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. They all have washrooms, kitchens and service openings that need the right sealant.
Our work is backed for twelve months.
- Location
- Daniel's Water (TN26)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
What the job involves on each surface
Plasterboard walls
We check that the board around the gap is sound. Crumbling edges are cleaned back before the sealant goes in.
Masonry and concrete
Masonry is dusty and porous, so preparation matters. We brush and vacuum the gap and use backing where the detail needs it before the sealant goes in.
DIY versus a professional finish
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
How to look after the new joints
Aftercare is simple:
- Never patch a fire seal with standard sealant
- Look in service cupboards and ceiling voids from time to time
- File the fire-stopping record where your assessor can find it
- Photograph sealed gaps before they’re covered up
Don’t drill through or remove a fire seal without putting it back properly. New services through a sealed wall should include fire stopping in the plan.
Small gaps around services are simple to deal with while there are only a few. Leave them and each new job adds another hole.
Also near Daniel's Water
Also in Daniel's Water
The process
There’s no need to move everything out before we come, only the area right around the joints. We protect the rest, and the job takes anything from a few hours to several days, depending on how many gaps there are in most cases. Somewhere as small as Daniel's Water, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Before starting, we go through the specification or action list with you.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out and the gap cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products for your records.
Getting ready for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Let us know about parking restrictions
- Try not to wet indoor joints just before the visit
How to get a quote
Want a quote for fire rated sealant? Please call 0345 464 0079 or drop us an email with a few details. We will explain what we’d do and give you a clear quote before any work starts.
Read more
What we can’t put right
We won’t take on work that won’t last, so here’s what sealant cannot put right:
- Fire risk assessments, which need a qualified assessor
- Doors that are not fire doors in the first place
- Openings too large for sealant, which need batts, boards or another system
Not sure which it is? You can call 0345 464 0079 or drop us an email and we’ll tell you honestly before booking.
What we seal
- Pipe & cable gaps
- Plasterboard & masonry
- Door frames
- Linear gaps
- Service penetrations
- Flats & HMOs
Why deal with it now?
Fire-rated sealants are less forgiving than ordinary ones. How it’s installed changes how it performs, so we follow the maker’s details on every gap. In a small place like Daniel's Water, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
Leaving a failed joint generally makes the job bigger, not smaller, as water and mould keep getting in. If you’re unsure, phone 0345 464 0079 or drop us an email and we’ll give you an honest view and a quote.
Why Daniel's Water customers choose us
- Old sealant always removed completely
- Approved under the ARBOMaster scheme
- Sanitary silicone with an anti-fungal additive in wet areas
- A 12-month guarantee on all work
Take a look at how sealant jobs are priced and our reviews.
What we’re called out for in Daniel's Water
Door frames are a common weak spot. The architrave hides the gap between frame and wall, so it can be left open when a door is replaced.
The most common problems we see are:
- Open gaps behind door architraves
- Gaps where walls meet ceilings or slabs
- Sealant items on a fire risk assessment action list
- Seals cut through by electricians, plumbers or data installers
Letting a property close to Pluckley station? Then any gap left by new services in shared walls should be closed with a fire-rated product.
Before you book anyone
- What product goes in the joint
- Is VAT in the price?
- Whether you can choose the colour
- Whether they seal over old material or remove it
Workplaces and buildings in Daniel's Water
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.
Around Daniel's Water, as everywhere, fire rated sealant is only as good as the preparation behind it.
Daniel's Water is about 3 miles west of Ashford, in Kent. From the centre of Daniel's Water to the outskirts, fire rated sealant is available for homes and businesses alike. Our area takes in 922 places across Kent, large and small. Crawley is on our list too, around 43 miles away.
Every address in TN26 is within our area for fire rated sealant, from the main roads to the quietest streets. If you are just outside Daniel's Water, we cover Fleeden (1 mile south), Chilmington Green (1 mile south-east), Great Chart (1 mile east), Godinton (2 miles north-east) and Hothfield (2 miles north). Further out, we also cover Maidstone (15 miles north-west), Ashford (3 miles east), Sittingbourne (14 miles north), Faversham (13 miles north), Hythe (13 miles east) and Davington (13 miles north).
Near you in Daniel's Water
Locally, jobs take us to homes and businesses close to Ashford Community Woodland, among other places. The closest station to Daniel's Water is Pluckley station, roughly 2.6 miles north-west. Nearby you’ll also find County Square (3.1 miles east) and Romden Castle (3.9 miles west). The countryside around Daniel's Water includes Orlestone Forest.
Daniel's Water: your questions answered
Do you cover smaller places like Daniel's Water?
Yes. Daniel's Water is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is Daniel's Water in your area for fire rated sealant?
Yes. We work across London and the South East, and Daniel's Water is part of that. You can ring 0345 464 0079 or send us an email and tell us what needs doing, and we will send you a clear quote.
Do you provide details of the products used?
Yes. Every gap we seal is listed with the product used, so you have it on file.
Do you hold any approvals?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Can you fill the gap behind a fire door frame?
Yes. Gaps behind architraves are a common job for us. Doors, seals and closers need a door specialist.
Is it messy?
Tidy work is part of the job. We protect what’s around the joints.
Can you tell me how many minutes the seal will last?
Ratings and certificates are not something we issue. What’s required is set by your assessor or designer, and the product’s tested details show what it achieves; we install to those details and record what we did.
Do I have to be there?
It depends on the job. For work indoors, someone needs to let us in.