Moray · Scotland
Regrouting in Cullen, Moray
Specialist regrouting for Cullen: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Crumbling grout between the tiles
- Floor grout that won’t come clean
- Discoloured grout on otherwise sound tiles
How we quote for regrouting
Some jobs are bigger than they look, and some smaller. The main factors:
- Access and height
- The type of sealant required
- How many rooms, windows or areas are involved
- Whether there’s mould to deal with
What it costs depends on the size of the job, how much old material has to come out and access to the work. We give a clear quote before work begins, so you know where you stand.
Asking for a quote
You do not need to know the technical terms. It helps if you can tell us:
- If someone has resealed it before
- Access, such as stairs, a lift or height
- How many joints, rooms or windows are involved
- Where the job is, and your postcode
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we will explain how we’d tackle it. Whenever you are ready, drop us a line at info@mrmastic.co.uk.
How we handle regrouting in Cullen
When grout stays dark however much you clean it, the stain is often in the grout itself. New grout is the fix that lasts and you can pick a different colour while you’re at it. We’re often asked to deal with good tiles let down by tired grout and shower grout that has worn away, across bathroom floors, wet rooms and bathroom wall tiles.
For a place like Cullen, the job is the same as anywhere: old material out, joints cleaned and dried, and a fresh, even finish. The journey and access are simply planned in advance.
Our work is backed for twelve months.

- Where
- Cullen (AB56)
- Region
- Moray
- Cover
- 12 months on all our work
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
How it works
You don’t need to clear the whole room or building before we come, only the area right around the joints. Everything nearby is protected, and the job takes a few hours for a shower enclosure, longer for a whole room for a typical job. Somewhere like Cullen may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- First, we check for loose or hollow tiles and point out any we find.
- The old grout comes out to a consistent depth, without damaging the tiles.
- The joints are vacuumed and cleaned.
- Fresh grout goes into the joints and the tile faces are wiped clean.
- We reseal the internal corners and edges with silicone.
How to prepare
- Tell us about access, such as stairs, a lift or high-level joints
- Tell us about any previous sealing or DIY attempts
- Mention any parking rules near the property
Getting a quote
Need a quote? Please email us at info@mrmastic.co.uk with a few details. We will explain what we’d do and give you a clear price before work begins.
Read more
DIY versus a professional finish
A DIY attempt does not rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
Surface by surface
Kitchen splashbacks
A splashback can be regrouted without touching the worktop. The worktop edge is finished with silicone.
Wet rooms
Wet rooms have water across the floor, so good grout is important. We check the tiles first.
Common problems we fix in Cullen
When tiles or the wall behind them move, the grout cracks. Loose tiles, bouncy floors and timber walls can all do it, so we check the tiles before any work starts.
Most people get in touch after spotting something like this:
- Stained grout that cleaning won’t shift
- Crumbling grout between the tiles
- Discoloured grout on otherwise sound tiles
- Gaps where the shower grout has gone
In and around Cullen, as anywhere, good regrouting starts with a clean, dry, properly prepared joint.
What to look for in a quote
- The length of the guarantee
- Whether they’re fully insured
- When the joint can take water or movement
- Is VAT in the price?
Leave it or put it right?
New grout smeared over the old does not bond well. A thin skin on top tends to break off, taking any repair with it. Raking out to a consistent depth gives the new grout something to hold. Exposed walls in smaller Scottish places take a lot of wind and rain, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
Doing several joints on one visit normally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. We’ll give you a clear quote for the lot.
Why Cullen clients choose us
- Full insurance on every job
- 12-month guarantee on every job
- Over 20 years’ experience
- Quality sealants from Arbo and Everbuild
Landlords, agents and businesses in Cullen
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll quote.
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together, and we are fully insured for the work.
What else we do in Cullen
Your questions about regrouting in Cullen
Is Cullen within the area you cover?
Yes. Cullen is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
What guarantee comes with regrouting in Cullen?
All our work, in Cullen and everywhere else, comes with a 12-month guarantee. We’re fully insured, and an ARBOMaster approved applicator.
How long does the job take?
It depends on the size of the job, but as a guide it takes anything from a few hours to a full day, depending on the area. We will give you a better idea when we quote.
Can you quote for more than one area?
Of course. Doing several areas at once is usually more efficient.
Can I do it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Do you reseal at the same time?
Yes, in most cases. New grout beside old sealant wouldn’t look right and could still leak.
Is it possible to regrout only the shower area?
We can. We’ll look at the rest of the room too and tell you if anything else needs attention.
Which products do you use?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Bathrooms and kitchens in Cullen
Cullen is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
Whether the job is in Cullen itself or nearby, the right material for each joint matters as much as a neat finish.
Cullen is about 6 miles east of Buckie, in Moray. Cullen gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. Our Moray coverage runs to 58 places, and Cullen is one of them. We also work in Aberdeen, about 45 miles from Cullen.
Work in AB56 is quoted and booked the same way as anywhere else. Streets in the area include The Square, Station Road and Old Church Road, and we cover them all. You’ll find Cullen on the A98, so it’s easy for us to get to. We also cover the places around Cullen: Lintmill (1 mile south), Portknockie (2 miles north-west), Sandend (3 miles east), Buckpool (3 miles west) and Findochty (3 miles west). Further out, we also cover Buckie (6 miles west), Keith (11 miles south-west), Fochabers (12 miles south-west), Ianstown (5 miles west), Lhanbryde (15 miles west) and Portessie (5 miles west). As one of the bigger places in Moray, Cullen has homes, rented property and businesses of every kind. For island and remote addresses, the job takes a little more planning, so let us know when you get in touch.
Local landmarks in Cullen
Other landmarks nearby include Fordyce Joiner's Workshop (3.4 miles south-east) and castle 30m NNW of Inaltry (2.5 miles south). For a walk, there’s Durn Hill.
