Surrey · England
Crosswater Regrouting
Regrouting across Crosswater and nearby, with every bit of old sealant taken out first.
- Grout that’s cracking and breaking up
- Corners filled with grout instead of silicone
- Grout that makes sound tiles look old
Regrouting in Crosswater, done properly
We check the tiles before any grout comes out. Loose or hollow tiles are pointed out first, since new grout can’t fix a problem underneath. Where the tiles are sound, regrouting gives the area a new lease of life. We work on bathroom wall tiles, tiled floors and wet rooms, and common reasons people get in touch are stained grout that cleaning won’t shift and gaps where the shower grout has gone.
For a small place like Crosswater, regrouting is planned like any other job: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
Our work is backed for twelve months, in Crosswater and everywhere else we cover.
- Location
- Crosswater (GU10)
- Wider area
- Surrey
- Cover
- 12 months on all our work
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Crosswater homes and their sealant
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
Homes close to St John the Evangelist include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Rented homes near Farnham station change hands often, and stained grout drags a rental down, and regrouting between lets puts that right. For site and facilities teams at buildings such as St John's CofE Aided Infant School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Crosswater is about 4 miles south of Farnham, in Surrey. Whether you are in the middle of Crosswater or further out, regrouting is available for homes and businesses alike, from flats and houses to offices and hotels. 395 places in Surrey are on our list, large and small. We also work in Reading, about 22 miles from Crosswater.
Our applicators cover all of the GU10 postcode area for regrouting and the streets around it. If you are just outside Crosswater, we cover Churt (1 mile south), Green Cross (1 mile south-east), Frensham (1 mile north-west), Barford (1 mile south) and Rushmoor (1 mile north-east). Within a short drive, we also cover Guildford (11 miles north-east), Woking (15 miles north-east), Camberley (13 miles north), Farnham (4 miles north), Frimley (12 miles north) and Haslemere (5 miles south-east).
Around Crosswater
Locally, jobs take us to homes and businesses close to Crossways Inn and The Flashes and the streets around them. For rail, the closest station is Farnham station, roughly 4.3 miles north. Other landmarks nearby include Farnham Castle (4.9 miles north) and Chase Community Hospital (4.7 miles south-west). The countryside around Crosswater includes Gibbet Hill and Upper Lake.
What happens on the day
All our tools and materials come with us in the van, so there’s nothing for you to buy. After a quick look at the joints together, the area is protected and the work begins. It normally takes a few hours, or longer for a fully tiled room. Somewhere as small as Crosswater, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We check the tiles for any that are hollow or loose.
- We rake out the grout evenly, protecting the tile edges.
- The joints are vacuumed clean.
- We regrout the joints and clean the tile faces.
- We finish with silicone in the moving joints.
How to prepare
- Mention any tricky access
- Let us know if you’ve seen damp or leaks
- Move anything stored near the joints
Get a quote
There’s no standard price list, because every job is different. Instead, we give you a clear price for your job. To arrange one, call 0345 464 0079 or send us an email.
Related advice
Crosswater: your questions answered
Do you work for landlords with property near Farnham station?
Yes, rental work is part of what we do. You can phone 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before we start.
Is Crosswater in your area for regrouting?
Yes, Crosswater is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or send us an email with a few details of the job.
Where is Mr Mastic based?
Mr Mastic is based in Crawley. Our applicators cover Crosswater.
Are you insured?
Yes, we are fully insured.
Is the work guaranteed?
There’s a 12-month guarantee on every job, including regrouting.
Do you regrout part of a bathroom, like the shower?
Yes, we often do. The shower normally fails first, so many people regrout just that part.
Which products do you use?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Does someone need to be in?
That depends on where the joints are. For work indoors, someone needs to let us in, and for outside work we will agree access with you when we book.
Nearby places to Crosswater
More services for Crosswater
Landlords, agents and businesses in Crosswater
Failed sealant is one of the commonest items on a check-out report. Several properties can go on one quote.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Honest limits
New sealant can’t fix everything, and we’d rather say so up front. Sealant will not put right:
- Water coming from plumbing rather than grout
- Tiles that have come away from the wall
- Movement in a stud wall or floor
Not sure which it is? You can ring 0345 464 0079 or email us and we will tell you honestly.
Surfaces we seal
- Kitchen splashbacks
- Shower walls
- Tiled floors
- Wet rooms
- Bathroom floors
- Bathroom wall tiles
Surface by surface
Bathroom floors
New floor grout makes a big difference to how a bathroom looks. The edges where floor meets wall or bath get silicone.
Bathroom wall tiles
Grout by the basin and bath tends to mark first. We can regroute just those areas or the whole wall.
Leave it or put it right?
Once grout cracks, water can get behind the tiling. Left alone, that water can loosen tiles or damage the wall, and then you’re looking at retiling. Dealing with it now keeps it small. Around Crosswater, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all make a difference.
Why choose Mr Mastic in Crosswater
- ARBOMaster approved applicator
- 4.9 on Google from 180+ five-star reviews
- Homes, businesses and hotels
- Fully insured
Take a look at how sealant jobs are priced or customer reviews.
How we quote for regrouting
Call for a quick quote. What matters most is:
- The type of sealant required
- The size of the job
- How easy the joints are to reach
- Mould in or behind the old joints
We do not show prices on the website, because each job is priced on what it involves. Call for a quick quote and we’ll talk you through it.
What we need to know
When you call or email, it’s useful to know:
- The type of property
- Roughly how big the job is
- What’s wrong with the joints now
- Access, such as stairs, a lift or height
If you’re in Crosswater and need regrouting, call 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
Keeping the joints in good condition
Looking after new joints is easy, and it makes a real difference:
- Don’t ignore a tile that feels loose
- Stick to mild products for cleaning grout
- Keep harsh bleach and acid cleaners off the grout
- Rinse soap off the tiles after each shower
A squeegee or cloth over the tiles after use stops soap and water sitting on the grout. Ventilate the room well to help it dry out.
Grout that’s washing out of a shower shouldn’t be left. Every shower pushes more water into the gaps and it can end up in the wall or the ceiling below.