Kent · England
Regrouting in Coldharbour, Kent
Problem with your tiled areas in Coldharbour? We remove the old material, prepare the joints and seal them properly.
- Corners filled with grout instead of silicone
- Floor grout that has worn and darkened
- Grout in a colour the owner wants to change
How we handle regrouting in Coldharbour
Regrouting suits shower walls, bathroom floors, kitchen splashbacks and wet rooms. Some jobs are a whole room, or just the area that has failed. Either way, tiled areas in Coldharbour are handled the same careful way. If you have greasy, stained grout behind the hob and grout that makes sound tiles look old, we can help, on tiled floors, wet rooms and shower walls alike.
For a small place like Coldharbour, regrouting is planned like any other job: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
The work is covered for a year after we finish. If there’s a problem with it, please phone 0345 464 0079 or drop us an email.
- Place
- Coldharbour (TN11)
- Region
- Kent
- Cover
- 12 months on all our work
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
How to look after the new joints
A little care helps the new joints last. We recommend:
- Look at the sealant in the corners now and then
- Skip wire brushes and scourers
- Wipe or squeegee the shower walls
- Keep the fan on after showering
Have any tile that moves checked straight away. A loose tile cracks the grout around it and open a path for water.
Cracked grout doesn’t stay cracked for long. Water gets behind the tiles, and they can begin to come away and early regrouting can avoid a much bigger job.
Towns and villages near Coldharbour
What else we do in Coldharbour
How the job changes by surface
Bathroom wall tiles
Grout by the basin and bath tends to mark first. We can regroute just those areas or the whole wall.
Kitchen splashbacks
Grout behind the hob and sink works hard. We renew the grout and the worktop sealant.
What we do, step by step
Good joint work is mostly preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. In total, it normally takes anything from a few hours to a full day, depending on the area. In a small place like Coldharbour, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we agree what’s being done and flag any loose tiles.
- Grout is raked out without chipping the tiles.
- Dust is cleared from every joint.
- The new grout goes in, then the tile faces are cleaned.
- Internal corners and edges are resealed.
How to prepare
- Mention any leaks or damp you’ve noticed
- For business premises, tell us about site rules or sign-in
- Let us know about parking restrictions
Ask for a quote
Every job is quoted individually, so start by telling us what you need. Just call 0345 464 0079 or drop us an email with the details and send pictures if you have them.
Read more
What we can’t put right
A few problems are outside what sealant work can do:
- Waterproofing that has failed below the tiling
- Water coming from plumbing rather than grout
- Tiles that are chipped or split
If in doubt, ring 0345 464 0079 or send us an email and we will say what we think.
Joints and surfaces we work on
- Tiled floors
- Bathroom wall tiles
- Shower walls
- Kitchen splashbacks
- Bathroom floors
- Wet rooms
Coldharbour homes and their sealant
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
For site and facilities teams at buildings such as St Margaret Clitherow Catholic Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. For landlords with property near Hildenborough station, clean grout and fresh sealant between tenancies make a bathroom look cared for again.
Coldharbour is about 2 miles north of Tonbridge, in Kent. We provide regrouting to homes and businesses in Coldharbour and nearby. We cover 922 towns and villages across Kent. There’s also a page for Crawley, roughly 21 miles from Coldharbour.
Work in TN11 is quoted and booked the same way as anywhere else. We also cover Hildenborough (1 mile south-west), Hilden Park (1 mile south), Watt's Cross (1 mile west), Budds (1 mile north) and Stocks Green (2 miles south-west). We also work in nearby towns such as Maidstone (12 miles east), Dartford (15 miles north), Sevenoaks (5 miles north-west), Royal Tunbridge Wells (6 miles south), Gravesend (15 miles north) and Northfleet (15 miles north).
Local landmarks in Coldharbour
In Coldharbour, that means homes and buildings near Hugh Christie Technology College and The Flying Dutchman Public House and the streets around them. For rail, the closest station is Hildenborough station, roughly 1.6 miles south-west. A little further out are Tonbridge Castle (2.2 miles south) and The Milne Museum (2 miles south). Open spaces near Coldharbour include Tudeley Woods RSPB reserve and Barden Lake.
Why deal with it now?
Regrouting will not help where tiles have come away. We’ll tell you before any work starts so you know what’s involved. Where the tiles are sound, regrouting is far less disruptive than retiling. Where a wall is exposed, as many are in small places like Coldharbour, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.
Why book with us
- Fully insured
- We leave the area clean and tidy
- Trusted Arbo and Everbuild sealants
- More than 20 years in sealant work
Read our cost guide and customer reviews.
Should I try it myself first?
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Do you need regrouting in Coldharbour?
Poor ventilation keeps grout damp, and damp grout is where mould grows. Black marks that come back after cleaning are often in the grout itself.
These are the problems we are asked about most:
- A grout colour that no longer suits the room
- Shower grout that has worn away
- Grout stained black or orange that won’t clean
- Dirty, worn grout on a tiled floor
Homes close to Parish Church of St John include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.
What to look for in a quote
- How the colour is chosen
- Whether the sealant suits the joint
- Whether VAT is included
- Is the old sealant removed completely?
Questions from Coldharbour
Do you cover Coldharbour for regrouting?
Yes, Coldharbour is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or send us an email with a few details of the job.
Do you work for landlords with property near Hildenborough station?
Yes. We work for letting agents and landlords as well as householders, and several properties can be quoted together. You can phone 0345 464 0079 or send us an email with the details for a clear quote.
Is there any odour?
That depends on the sealant. Some smell for a while, some hardly at all.
Will you leave a mess?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
Can you change the grout colour?
Yes. It’s the ideal time to change it. Tell us the colour you’d like when you ask for a quote.
Are you fully insured?
Yes. We are fully insured.
What do you put in the joint?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference.
What guarantee comes with the work?
Our one-year guarantee applies to all our work, and we are fully insured.