South Lanarkshire · Scotland

Regrouting in Candy Mill

Regrouting for Candy Mill and the surrounding area: careful preparation, the right product and tidy work. Ask us for a quick quote.

  • Good tiles let down by tired grout
  • Cracked grout along the bath or tray
  • Grout that stays dark however much it’s cleaned

Regrouting in Candy Mill

Regrouting in Candy Mill

Our applicators rake out the old grout to an even depth, taking care not to chip the tile edges. After vacuuming, new grout goes in and the tiles are wiped clean, with silicone renewed in the corners. We work on shower walls, bathroom wall tiles and kitchen splashbacks, and the jobs we see most are floor grout that has worn and darkened and grout that makes sound tiles look old.

Being further from a city doesn’t change the work: old material out, joints cleaned and dried, and a fresh, even finish. The journey and access are simply planned in advance.

All our work comes with a 12-month guarantee.

Where
Candy Mill (ML12)
Wider area
South Lanarkshire
Cover
12 months on all our work
Quotes
Quoted before any work starts
Email
info@mrmastic.co.uk
Page updated
26 October 2026
Mr Mastic applicator kneeling beside a white bath, sealing the joint where the bath meets beige wall tiles

Your questions about regrouting in Candy Mill

What guarantee comes with regrouting in Candy Mill?

All our work, in Candy Mill and everywhere else, comes with a 12-month guarantee. We’re also fully insured and ARBOMaster approved.

Will you come out to Candy Mill?

Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.

When can I use the shower again?

It varies with the products and the room. We will give you a time to follow at the end of the visit.

Do you work for hotels and businesses?

Yes. Hotels, offices and other businesses use us, and we’re fully insured.

Can landlords and businesses book you?

Yes, often. We can quote for several properties at once.

Do you remove the old sealant?

Yes, always, and completely. New sealant will not bond properly to old, so the joint is cleaned back first.

Will it make a mess?

We keep the work tidy. Nearby surfaces are protected.

Can I add another job to the visit?

Yes, and it often makes sense. Combining jobs makes good use of the visit, so mention them when you ask for a quote.

What affects the quote in Candy Mill

We quote each job individually. These are the things that affect it:

  • The size of the job
  • The number of rooms or windows
  • When we can work, for business premises
  • Whether old sealant or filler has to be cut out

What it costs depends on the size of the job, how much old material has to come out and how easy the joints are to reach. You will have a clear quote before any work starts.

What we need to know

There’s no need for technical detail. Just tell us:

  • The problem you’ve noticed
  • Whether it has been sealed before
  • The address or postcode of the job
  • The type of property

Every job is quoted individually, so the first step is telling us about yours. Just drop us a line at info@mrmastic.co.uk with the details, and pictures are welcome.

Different surfaces, different methods

Kitchen splashbacks

Grout behind the hob and sink works hard. We renew the grout and the worktop sealant.

Bathroom floors

New floor grout makes a big difference to how a bathroom looks. The edges where floor meets wall or bath get silicone.

What happens if it’s left?

Once grout cracks, water can get behind the tiling. Left alone, that water can loosen tiles or damage the wall, and then you are looking at retiling. Sorting it early keeps the job simple. Around Candy Mill, water from a failed joint in an older stone home can soak into timber and plaster.

Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all make a difference.

Why Candy Mill clients choose us

  • 20+ years of sealant experience
  • 180+ five-star Google reviews
  • Neat joints and a tidy finish
  • Sanitary silicone with an anti-fungal additive in wet areas

Read our cost guide and what customers say.

Honest limits

We’d rather tell you now than do work that won’t last, so here’s what sealant can’t put right:

  • Tiles that are chipped or split
  • A floor or wall that keeps moving
  • Water coming from plumbing rather than grout

If in doubt, drop us a line at info@mrmastic.co.uk and we’ll say what we think before you book.

Where we work in Candy Mill

  • Bathroom wall tiles
  • Tiled floors
  • Bathroom floors
  • Kitchen splashbacks
  • Shower walls
  • Wet rooms

Signs you need regrouting in Candy Mill

A bathroom that stays damp keeps the grout wet, and damp grout is where mould grows. When black spots keep returning, the mould has generally got into the grout.

Common reasons people contact us are:

  • Grout washed out of a shower
  • Floor grout that won’t come clean
  • Kitchen splashback grout stained by grease
  • Crumbling grout between the tiles

For jobs in and around Candy Mill, choosing the right material for each joint is as important as a tidy finish.

Questions to ask before you book

  • Whether the sealant suits the joint
  • Is the old sealant removed completely?
  • The length of the guarantee
  • How the joint is cleaned and prepared

Our hiring checklist

Should I try it myself first?

The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.

Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

What regrouting looks like in Candy Mill

In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Failed sealant around a bath or shower is worth sorting between tenancies. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that doesn’t dry out.

Around Candy Mill, as everywhere, regrouting is only as good as the preparation behind it.

Candy Mill is about 15 miles east of Carluke, in South Lanarkshire. Our applicators cover regrouting for householders, landlords and businesses in Candy Mill and nearby. Our South Lanarkshire coverage runs to 139 places, Candy Mill among them. There’s also a page for Edinburgh, roughly 22 miles from Candy Mill.

All of ML12 is within our area for regrouting, from the main roads to the quietest streets. We also cover the places around Candy Mill: Skirling (1 mile south), Elsrickle (1 mile north-west), Walston (2 miles north-west), Biggar (3 miles south-west) and Kirkurd (4 miles north-east). We also work in nearby towns such as Carluke (15 miles west), Lanark (12 miles west), Forth (11 miles north-west), Symington (6 miles south-west), Braidwood (14 miles west) and Carnwath (6 miles north-west).

Around Candy Mill

Other landmarks nearby include Edmonston Castle (less than half a mile north) and Kello Hospital (3.1 miles south-west). The countryside around Candy Mill includes Black Mount.

Map of Candy Mill © OpenStreetMap contributors

What we do, step by step

The work is kept neat and contained to the joints we’re treating, so you can get on with your day. Expect the work to take a few hours for a shower enclosure, longer for a whole room, and we tell you how long to leave it before we go. For a place like Candy Mill, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.

  1. First we agree what’s being done and flag any loose tiles.
  2. We remove the old grout carefully.
  3. Dust is cleared from every joint.
  4. The new grout goes in, then the tile faces are cleaned.
  5. Internal corners and edges are resealed.

Before we arrive

  • Mention any parking rules near the property
  • Try not to wet indoor joints just before the visit
  • Clear items away from the joints we’re working on

Get a quote

Asking for a quote is easy: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job, and we will take it from there.

Get a quick quote

Read more

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job