Kent · England
Regrouting in Breach, Kent
Regrouting for Breach, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Grout that’s cracking and breaking up
- A grout colour that no longer suits the room
- Cracked grout along the bath or tray
Regrouting in Breach, done properly
Changing the grout colour is a simple way to update tiles. You might go from white to grey or back again. Tell us what you have in mind when you ask for a quote. If you are dealing with good tiles let down by tired grout and cracked grout along the bath or tray, we can help, on bathroom wall tiles, tiled floors and wet rooms alike.
For a small place like Breach, regrouting is planned like any other job: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.
- Where
- Breach (CT4)
- Region
- Kent
- Guarantee
- One year on every job
- Quote
- A clear price before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
How the job changes by surface
Wet rooms
New grout in a wet room keeps the surface sound. It cannot fix waterproofing below the tiles.
Shower walls
Most regrouting jobs include a shower. Gaps here let water get behind the tiling.
When something else is needed
We will always be straight with you, so here’s what sealant cannot fix:
- Leaks from pipes, valves or wastes (a plumber’s job)
- Movement in a stud wall or floor
- Tiles that have come away from the wall
If you’re not sure, just call 0345 464 0079 or email us and we’ll give you a straight answer.
Surfaces we seal
- Wet rooms
- Bathroom wall tiles
- Kitchen splashbacks
- Tiled floors
- Bathroom floors
- Shower walls
Why it’s worth doing now in Breach
New grout smeared over the old does not bond well. It sits thinly on top and soon flakes away, taking any repair with it. Raking out to a consistent depth gives the new grout something to hold. Older cottages and farmhouses around Breach can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Why us?
- Experience in homes, commercial sites and hotels
- An ARBOMaster approved applicator
- Rated 4.9 stars on Google
- Anti-fungal sanitary silicone in wet areas
Take a look at how sealant jobs are priced and customer reviews.
What we do, step by step
There’s no need to move everything out, just the space around the work. We protect the rest, and the job takes a few hours for a shower enclosure, longer for a whole room for a typical job. In a small place like Breach, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We agree the area to be regrouted and point out any loose tiles.
- We remove the old grout carefully.
- Dust is cleared from every joint.
- We grout the joints and wipe the tiles clean.
- We renew the silicone at the corners and edges.
Preparing for the visit
- Let us know about stairs, lifts or work at height
- Keep pets and children clear of the area while we work
- For business premises, tell us about site rules or sign-in
Getting a quote
Getting a quote is simple: let us know the job and the location and its rough size. A few photos by email make the job easier to understand, and we’ll take it from there.
Read more
Other services in Breach
Should I try it myself first?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly.
Bathrooms and kitchens in Breach
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In and around Breach, as anywhere, good regrouting starts with a clean, dry, properly prepared joint.
Breach is about 5 miles north of Hawkinge, in Kent. Homes, rented property, offices and hotels in Breach can book us for regrouting, old or new, large or small. The work is guaranteed for a year. Across Kent, we cover 922 places, Breach among them. You can also see our page for Chelmsford, roughly 48 miles from Breach.
Postcode districts we cover here for regrouting: CT4. Other places close to Breach include Lodge Lees (1 mile east), Denton (1 mile east), Wootton (2 miles south-east), Shelvin (2 miles east) and Selsted (2 miles south-east). Within a short drive, we also cover Ashford (12 miles west), Canterbury (7 miles north-west), Dover (7 miles south-east), Folkestone (7 miles south), Whitstable (13 miles north-west) and Deal (11 miles east).
Landmarks near Breach
Around Breach, our work takes us to homes and buildings near The Palm Tree Inn and Jumping Downs. The closest station to Breach is Snowdown station, roughly 3.6 miles north-east of the centre. Open spaces near Breach include Cheriton Hill.
What we’re called out for in Breach
Hard water and soap leave a film on grout and stick to it. In time the grout under it darkens and breaks down, and at that point, new grout is the better answer.
It’s worth asking for a quote if you see:
- Kitchen splashback grout stained by grease
- Floor grout that has worn and darkened
- Grout washed out of a shower
- Stained grout that cleaning will not shift
Letting a property close to Snowdown station? Then a regrout while the flat is empty is quicker than working around a tenant.
What to look for in a quote
- What preparation is included
- Whether VAT is included
- What product goes in the joint
- Is the old sealant removed completely?
Your questions about regrouting in Breach
Do you cover smaller places like Breach?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Is Breach in your area for regrouting?
Yes. Our work covers London and the South East, and Breach is part of that. Just ring 0345 464 0079 or send us an email with a few details of the job, and we will give you a clear quote.
Can you quote for more than one area?
Yes. Just list everything you need.
Can you seal over the old sealant?
No, because it fails. We remove every bit of old sealant first, so the new joint bonds to clean surfaces.
Will the old sealant be removed?
Yes, every time. New silicone doesn’t stick to old silicone, so the joint is cleaned back first.
Do you regrout part of a bathroom, like the shower?
Yes. A lot of our jobs are only the shower, or the area where the grout has gone.
Is it messy?
Very little: the area around the joints is protected first, and we tidy up before we go.
Is it worth trying it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
What affects the cost of regrouting
We do not publish a price list, because no two jobs are the same. What we look at:
- The product the joint needs
- The number of rooms or windows
- How much old sealant there is and how hard it is to remove
- The number and length of the joints
Leaving a failed joint usually makes the job bigger, not smaller, as water and mould keep getting in. If you are not sure whether it needs doing, ring 0345 464 0079 or email us for an honest opinion and a quote.
What to tell us for a quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- Whether it has been sealed before
- Where the property is
- Roughly how big the job is
- If it’s domestic, commercial or a hotel
To get a quote, ring 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. We will give you a clear quote before any work starts.