Kent · England
Regrouting in Shelvin, Kent
Regrouting for Shelvin and the surrounding area: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Shower grout that has worn away
- Cracked or crumbling grout lines
- Grout that makes sound tiles look old
Shelvin homes and their sealant
There are hotels and other places to stay in and around Shelvin. Hotel bathrooms are part of our work as well as homes, and can be done room by room. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For an older house near a landmark such as Church of St Martin, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Shelvin is about 6 miles north-west of Dover, in Kent. We provide regrouting to homeowners, landlords and businesses in Shelvin, as part of our work across Kent. Our area takes in 922 places across Kent, from the larger towns to small villages. Our Chelmsford page covers work nearby.
Jobs for regrouting in CT4 is quoted and booked the same way as anywhere else. Local streets include Clints Lane and Shelvin Lane. Close by, we work in Wootton (1 mile south-west), Denton (1 mile west), Lodge Lees (1 mile west), Breach (2 miles west) and Selsted (2 miles south). We also work in nearby towns such as Ashford (14 miles west), Canterbury (8 miles north-west), Dover (6 miles south-east), Folkestone (7 miles south), Ramsgate (14 miles north-east) and Whitstable (13 miles north-west).
Local landmarks in Shelvin
In Shelvin, that means homes and buildings near Coach House Hotel. For rail, the closest station is Shepherds Well station, about 1.9 miles east of the centre. Nearby you’ll also find Buckland Hospital (5.9 miles south-east).
How we handle regrouting in Shelvin
Grout fills the gaps between tiles, while sealant goes where tiles meet a bath, tray or worktop. When grout cracks or washes out, water has a way in behind the tiling. We rake it out and replace it and renew the silicone at the edges. If you have cracked grout along the bath or tray and grout stained black or orange that won’t clean, we can put it right.
Homes around Shelvin are mostly houses and cottages rather than flats. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
All our work comes with our one-year guarantee.
- Place
- Shelvin (CT4)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
FAQs for Shelvin
Will you come out to Shelvin?
Yes. Shelvin is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you take on hotel work around Shelvin?
Yes, hotels and guest houses are among the places we work. A room-by-room programme keeps most rooms in use while the work goes on.
Where are you based?
We are a Crawley-based firm, with over 20 years’ experience. We work across South East England, London and Scotland.
How do I get a quote for regrouting in Shelvin?
Every job is different, so each one gets its own quote. For a quick quote, call 0345 464 0079 or send us an email with a short description of the job.
How long should I wait before showering?
You’ll get a clear time from us before we go. The grout and sealant both need to cure before the shower is used.
What if some of my tiles are loose?
Tiles that have come away need sorting first. We’ll point them out at the start.
Can you seal over the old sealant?
No, and we never do. It may look fine at first, but the new bead soon lifts. The old sealant has to come out completely.
Do I need to be at home?
That depends on where the joints are. For work indoors, someone needs to let us in, while outside work can sometimes be arranged differently.
Can I do it myself?
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
Surface by surface
Kitchen splashbacks
Kitchen grout collects grease and food splashes. Stained grout is best replaced.
Shower walls
The grout in a shower takes the brunt of the water. We replace it, and reseal the corners.
What we’re called out for in Shelvin
A poor original job is a common cause. If it was mixed too wet or not pressed in firmly can wash out within a few years.
These are the problems we are asked about most:
- Crumbling grout between the tiles
- Splashback grout that has darkened
- Grout in corners that has cracked
- Discoloured grout on otherwise sound tiles
Letting a property close to Shepherds Well station? Then a regrout while the flat is empty is quicker than working around a tenant.
Before you book anyone
- Whether they’re fully insured
- How the surfaces are prepared before sealing
- What product goes in the joint
- What guarantee comes with the work
How we quote for regrouting
Jobs vary more than people expect. The main factors:
- The number of rooms or windows
- When we can work, for business premises
- How much there is to do
- Mould in or behind the old joints
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
Asking for a quote
Before you ask for a quote, have a think about:
- Roughly how big the job is
- If it’s domestic, commercial or a hotel
- Pictures of the joints, sent by email
- How we’d reach the joints
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. When it suits you, ring 0345 464 0079 or drop us an email.
Places near Shelvin
What else we do in Shelvin
Landlord and commercial work in Shelvin
Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.
Letting agents often deal with us directly. Tell us the address, the job and how access works.
How it works
We work through the job in order: protect, prepare, seal, tidy. Typically it takes a few hours, or longer for a fully tiled room, and the area is left clean. Somewhere as small as Shelvin, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We agree the area to be regrouted and point out any loose tiles.
- Grout is raked out without chipping the tiles.
- The joints are cleaned out and vacuumed.
- We grout the joints and wipe the tiles clean.
- Internal corners and edges are resealed.
Before we arrive
- Keep pets and children clear of the area while we work
- Tell us if parking is tricky
- Tell us about any water getting in
How to get a quote
For a quote, phone 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. We will give you a clear quote before any work starts.
Read more
Why it’s worth doing now in Shelvin
With regrouting, your tiles stay where they are. Retiling means stripping the walls, making good and choosing new tiles, and often a few days without a shower. When the tiles are fine, it’s the sensible first step. Around Shelvin, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
What you pay reflects the work, not a rough estimate. That’s why we ask a few questions first.
What you get with us
- Old sealant always removed completely
- 12-month guarantee on every job
- We leave the area clean and tidy
- Trusted Arbo and Everbuild sealants
Read our cost guide and what customers say.