Aberdeen · Scotland

Regrouting in Belhelvie, Aberdeen

Raking out old, cracked or stained grout and regrouting tiled walls and floors for Belhelvie, backed by a 12-month guarantee. Ask us for a quote.

  • Grout that’s cracking and breaking up
  • Grout washed out of a shower
  • A grout colour that no longer suits the room

Regrouting for Belhelvie homes and businesses

About our regrouting in Belhelvie

Across Belhelvie, we regrout tiled showers, bathrooms and kitchens. Out comes the old grout, the joints are cleaned and new grout goes in, and we finish by resealing the edges. If you’re dealing with kitchen splashback grout stained by grease and crumbling grout between the tiles, we can put it right.

A bathroom in a place like Belhelvie gets the same daily wear as one in a city flat. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.

Every job is covered by a 12-month guarantee, wherever you are in Aberdeen.

Where
Belhelvie (AB23)
Wider area
Aberdeen
Guarantee
A year, on every job
Quotes
A clear quote up front
Email
info@mrmastic.co.uk
Updated
26 October 2026
Silicone being applied where a shower enclosure meets beige wall tiles

How the visit works

We bring everything the job needs with us. Once we have agreed what’s being done, the area is protected and the work begins. Most jobs take a few hours for a shower enclosure, longer for a whole room. Outdoor work around Belhelvie depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Work indoors is not affected.

  1. Every tile area is checked for hollow or loose tiles first.
  2. The old grout is removed to an even depth.
  3. We vacuum the joints so the new grout bonds.
  4. We regrout the joints and clean the tile faces.
  5. We finish with silicone in the moving joints.

Getting ready for the visit

  • Mention any tricky access
  • Clear items away from the joints we’re working on
  • Where the joints are inside, avoid wetting them before we arrive

How to get a quote

A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email pictures if that’s easy.

Get a price

Read more

What we cannot put right

It helps to know what we can’t do too:

  • A leaking wet room membrane
  • Tiles that are chipped or split
  • Loose tiles, which need refixing first

If you are not sure, just email us at info@mrmastic.co.uk and we will give you a straight answer.

Where we work in Belhelvie

  • Tiled floors
  • Bathroom wall tiles
  • Bathroom floors
  • Wet rooms
  • Shower walls
  • Kitchen splashbacks

When to call us in Belhelvie

A poor original job is a common cause. If it was mixed too wet or not pressed in firmly can wash out within a few years.

It’s worth asking for a quote if you see:

  • Dirty, worn grout on a tiled floor
  • Grout washed out of a shower
  • Good tiles let down by tired grout
  • Stained grout that cleaning won’t shift

For landlords with property near Dyce station, stained grout drags a rental down, and regrouting between lets puts that right.

What to look for in a quote

  • What the quote includes, VAT included or not
  • How long the guarantee is
  • Whether all the old sealant comes out first
  • Whether you can choose the colour

How to choose a mastic man

DIY sealant or a professional job?

Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.

If you’ve already had a go yourself, that’s fine. We cut it out and start again, so tell us about it when you ask for a quote.

Work for landlords, hotels and businesses

Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.

Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we will quote.

Belhelvie homes and their sealant

Belhelvie is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that doesn’t dry out.

In the older streets around Belhelvie North Church, walls and floors in older homes can move, and sealant and grout show it first.

Belhelvie is about 7 miles north of Aberdeen, in Aberdeen. Belhelvie gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. Belhelvie is one of 63 towns and villages in Aberdeen where we work. You can also see our page for Aberdeen, roughly 7 miles from Belhelvie.

Every address in AB23 is within our area for regrouting, from the main roads to the quietest streets. Regrouting is available to properties on Cairn View, Park Grove and Park Terrace and the roads around them. If you are just outside Belhelvie, we cover Hill of Keir (1 mile north), Balmedie (1 mile east), Potterton (1 mile south), Whitecairns (2 miles west) and Blackdog (2 miles south). We also work in nearby towns such as Aberdeen (7 miles south), Rosemount (7 miles south), Berryden (6 miles south), Ferryhill (8 miles south), New Aberdeen (7 miles south) and Dyce (5 miles south-west).

Local landmarks in Belhelvie

For rail, the closest station is Dyce station, roughly 4.9 miles south-west. A little further out are Kingseat Hospital (2.9 miles west) and Foveran Castle (5 miles north-east). For a walk, there’s Corby Loch and Perwinnes Hill.

Map of Belhelvie © OpenStreetMap contributors

Aftercare tips

Once the sealant has cured, a few habits help it last:

  • Use a squeegee on the tiles after showering
  • Keep an eye on the silicone along the edges
  • Do not use strong acidic cleaners on grout
  • Rinse soap off the tiles after each shower

If a tile starts to feel loose, get it looked at early. Movement will crack the new grout and lets water in.

Stains that won’t clean are a sign the grout is breaking down. At this point it’s a simple regrout while the tiles are still sound.

How we quote for regrouting

We don’t publish a price list, because jobs vary so much. What we look at:

  • Access and height
  • How many rooms, windows or areas are involved
  • The product the joint needs
  • Mould in or behind the old joints

There are no prices on our website, because each job is priced on what it involves. For a quick quote, please send an email to info@mrmastic.co.uk.

What to tell us for a quote

The more you tell us, the more accurate the quote. When you ask for a quote, tell us:

  • How we’d reach the joints
  • Any previous sealing or DIY work
  • What’s wrong with the joints now
  • Photos by email, if that is easy

For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we’ll explain what’s involved and give you a clear quote.

Questions from Belhelvie

Can you help a landlord with a rental near Dyce station?

Yes, rental work is part of what we do. You can email us at info@mrmastic.co.uk with the address and a few details, and we will give you a fixed price before any work starts.

Can you do regrouting in Belhelvie?

Yes, Belhelvie is within the area we cover. Our work covers the whole of Scotland. Just drop us a line at info@mrmastic.co.uk with a few details of the job, and we will send you a clear quote.

Where is Mr Mastic based?

Mr Mastic is based in Crawley. We cover Belhelvie and the rest of Aberdeen, along with the rest of our area.

Do you remove the old sealant?

Yes. All of the old material is cut out and the joint cleaned before resealing.

Is resealing included with regrouting?

Yes, in most cases. New grout beside old sealant wouldn’t look right and could still leak.

Can I do it myself?

You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.

Can new sealant go over the old?

No, because it fails. We remove every bit of old sealant first, so the new sealant bonds properly.

Is it messy?

Tidy work is part of the job. We protect what’s around the joints, and the area is left clean when we finish.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job