Highland · Scotland
Regrouting in Balintore, Highland
Raking out old, cracked or stained grout and regrouting tiled walls and floors in Balintore, with a 12-month guarantee on every job. Ask us for a quote.
- Shower grout that has worn away
- Grout stained black or orange that won’t clean
- Cracked or crumbling grout lines
For landlords and businesses
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Regrouting for homes and businesses in Balintore
We regroute showers, bathroom walls and floors, splashbacks and wet rooms. It can be a full room, or just the area that has failed. Either way, tiled areas in Balintore are handled the same careful way. Typical jobs include stained grout that cleaning won’t shift and cracked or crumbling grout lines, on bathroom wall tiles, bathroom floors and kitchen splashbacks.
Bathrooms in smaller places like Balintore work just as hard as those in the cities. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.
The work is covered for a year after we finish. If anything is not right with it, drop us a line at info@mrmastic.co.uk.
- Location
- Balintore (IV20)
- Wider area
- Highland
- Guarantee
- A year, on every job
- Quotes
- A clear price before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Nearby places to Balintore
More services for Balintore
Aftercare tips
After the cure time, these simple habits help:
- Use a squeegee on the tiles after showering
- Clean with a soft brush, not anything metal
- Rinse soap off the tiles after each shower
- Clean grout with a mild bathroom cleaner
Have any tile that moves checked straight away. Movement will crack the new grout and open a path for water.
Grout that’s washing out of a shower shouldn’t be left. Every shower pushes more water into the gaps, and that water can reach the wall or the floor below.
What the job involves on each surface
Bathroom floors
Floor grout takes foot traffic as well as water. It gets worn and dirty.
Corners and edges
Edges are resealed while we are there, so the whole area is finished together.
Questions from Balintore
Is Balintore within the area you cover?
Yes. Balintore is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Can you help a landlord with a rental near Fearn station?
Yes, landlords and agents are among the people we work for. Just drop us a line at info@mrmastic.co.uk with the address and what needs doing, and we will give you a clear price.
What should I tell you?
Where the job is, what the problem is and roughly how big it is. Photos by email help too.
Will the sealant be renewed as well as the grout?
In most cases, yes. The corners and edges should be silicone and doing both at once leaves everything sound.
Are you fully insured?
Yes. We are fully insured.
Do you hold any approvals?
Yes. We hold ARBOMaster approved applicator status, and we are fully insured.
How soon can the shower be used after regrouting?
Before we leave, we’ll tell you how long to wait. The grout and sealant both need to cure before the shower is used.
Where do you work from?
We work from Crawley. We cover Balintore and the rest of Highland, along with the rest of our area.
How the visit works
When we arrive, we look over the joints with you first, so you know exactly what we’re doing. We protect the surfaces around the joints before work begins. The work generally takes a few hours for a shower enclosure, longer for a whole room. In smaller Scottish places, parking is normally less of an issue than access and distance. Let us know how to find you and how to reach the joints.
- We check the tiles for any that are hollow or loose.
- The old grout is removed to an even depth.
- We vacuum the joints so the new grout bonds.
- We regrout the joints and clean the tile faces.
- Silicone goes into the corners and along the edges.
How to prepare
- Plan for the work area to be out of bounds to pets and children
- Mention any leaks or damp you’ve noticed
- Try not to wet indoor joints just before the visit
How to get a quote
Every job is quoted individually. Just email us at info@mrmastic.co.uk with the details and send photos if you have them.
Read more
Regrouting around Balintore
Balintore is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies.
In and around Balintore, as anywhere, good regrouting starts with a clean, dry, properly prepared joint.
Balintore is about 12 miles north of Nairn, in Highland. Whether you are in the middle of Balintore or further out, we cover regrouting for every kind of property, from flats and houses to offices and hotels. Across Highland, we cover 253 places, and Balintore is one of them. Our Aberdeen page covers work nearby.
Here we cover the IV20 postcode area for regrouting. Streets in the area include Main Street, Bank Street and Ross Street, and we cover them all. Nearby, we also carry out regrouting in Shandwick (1 mile south-west), Hilton of Cadboll (1 mile north-east), Loans of Tullich (1 mile north-west), Fearn (2 miles north-west) and Hill of Fearn (2 miles north-west). We also work in nearby towns such as Nairn (12 miles south), Tain (6 miles north-west), Alness (13 miles west), Dornoch (10 miles north-west), Invergordon (10 miles south-west) and Fortrose (14 miles south-west). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
Landmarks near Balintore
The nearest railway station is Fearn station, about 3.4 miles north-west of the centre. The countryside around Balintore includes Loch Eye.
Why act early in Balintore
Grouting over old grout rarely lasts. A thin skin on top tends to break off. Removing the old grout to an even depth lets the new grout key in properly. In an older home around Balintore, damp from a failed joint can get into timber and plaster, which is a far bigger job than the sealant.
The cost depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. You will have a clear quote before any work starts.
Why book with us
- We’re fully insured
- An ARBOMaster approved applicator
- Experience in homes, commercial sites and hotels
- More than 20 years in sealant work
Take a look at what affects the cost or what customers say.
Common problems we fix in Balintore
Grout is porous, so it soaks up water, soap and dirt. Over time it stains, softens and starts to crumble, especially in a shower that’s used every day.
Most people get in touch when they notice one of these:
- Grout that stays dark however much it’s cleaned
- Kitchen splashback grout stained by grease
- Gaps where the shower grout has gone
- Floor grout that won’t come clean
If you let a flat or house near Fearn station, a regrout while the flat is empty is quicker than working around a tenant.
What your quote should include
- What the cure time is
- Which colour the sealant will be
- How hidden problems are handled
- Which sealant they’ll use, and why
What affects the quote in Balintore
You will get a clear quote before any work starts. It’s based on:
- Mould in or behind the old joints
- Whether the work is at height
- Any working-time requirements on site
- How much there is to do
No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference, and we’ll explain the quote if you ask.
What we need to know
Photos by email are helpful but not essential. Please mention:
- How we’d reach the joints
- Any previous sealing or DIY work
- Photos by email, if that’s easy
- Where the job is, and your postcode
Getting a quote is simple: let us know the job and the location, and roughly how big it is. A few photos by email make the job easier to understand.