Surrey · England
Regrouting in Ashtead, Surrey
Our applicators work in Ashtead on raking out old, cracked or stained grout and regrouting tiled walls and floors. Old material cut out, joints cleaned and sealed neatly and a one-year guarantee.
- Grout that stays dark however much it’s cleaned
- Crumbling grout between the tiles
- Splashback grout that has darkened
How to look after the new joints
Looking after new joints is easy, and it makes a real difference:
- Stick to mild products for cleaning grout
- Have loose tiles looked at early
- Rinse the tiles after showering
- Avoid neat bleach and strong acid descalers on grout
A squeegee or cloth over the tiles after use keeps water off the grout. Run the extractor fan or open a window to help it dry out.
Leaving failed grout can mean tiles come loose. Once that happens, regrouting won’t fix it, so it’s worth acting early.
Regrouting in Ashtead
Grout is the filler between your tiles, and sealant is what goes along the bath, tray or worktop. Once grout starts to crack or wash away, water can get in behind the tiles. Our job is to rake it out and put new grout in and renew the silicone at the edges. We are often asked to deal with gaps where the shower grout has gone and grout in corners that has cracked, across kitchen splashbacks, tiled floors and bathroom floors.
Homes around Ashtead have been extended and refitted over the decades. A common problem is new sealant laid over old, which never bonds properly, which is why all the old material has to come out first.
You’re covered for a year from the day we finish. If anything is not right with it, phone 0345 464 0079 or email us.
- Place
- Ashtead (KT21, KT22)
- Wider area
- Surrey
- Guarantee
- One year on every job
- Price
- A clear price before we start
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Ashtead: your questions answered
Is there a guarantee on regrouting in Ashtead?
Every job comes with our one-year guarantee, wherever it is. We are also fully insured and ARBOMaster approved.
Do you cover Ashtead for regrouting?
Yes, Ashtead is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or drop us an email with a few details of the job.
Can landlords and businesses book you?
Yes. We work for homeowners, landlords, letting agents, businesses and hotels across Surrey.
Could my grout be a different colour after regrouting?
Yes, regrouting is the time to do it. Mention the colour you have in mind when you call 0345 464 0079 or drop us an email.
Can you quote for more than one area?
Yes. Tell us about everything you’d like done and we will quote it together.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just make sure your landlord agrees.
Do the sealants smell?
There can be a smell while the sealant cures, but it fades. Ventilation helps.
What information do you need?
Only a few details: where it is, what you’ve noticed and how we reach it. After that, simply call 0345 464 0079 or email us.
What the job involves on each surface
Bathroom floors
Cracked floor grout can point to movement underneath. We check the tiles before regrouting.
Shower walls
Showers put more water on grout than anywhere else. We replace it, and reseal the corners.
The process
We keep the work tidy and contained to the joints we are treating, so you can get on with your day. The job normally takes a few hours for a shower enclosure, longer for a whole room, and we explain the cure time before we leave. For a job in Ashtead, we need access to where the work is and somewhere nearby to park. For outside work, let us know about side access, gates and any upper-floor joints.
- We start by checking the tiles for any that are loose or hollow.
- Old grout is raked out to a consistent depth without chipping the tiles.
- Dust and debris are vacuumed out of every joint.
- We fill the joints with new grout, then clean the tiles.
- Corners and edges are resealed with flexible silicone, not grout.
Before we arrive
- On commercial sites, let us know about site rules
- Mention any leaks or damp you’ve noticed
- For indoor joints, keep the area dry beforehand if you can
Get a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.
Read more
Ashtead homes and their sealant
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Homes close to St George's Church include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them. For landlords with property near Ashtead station, clean grout and fresh sealant between tenancies make a bathroom look cared for again.
Ashtead is about 2 miles south-west of Epsom, in Surrey. Across the KT21 area, our applicators can take on regrouting. Our Surrey coverage runs to 395 places, Ashtead among them. There’s also a page for Crawley, roughly 15 miles from Ashtead.
All of KT21 and KT22 is within our area for regrouting. If you need regrouting at a property on The Street, Church Road and Greville Park Road or a nearby road, our applicators can take on the job. Neighbouring places we cover for regrouting include Pachesham Park (2 miles north-west), Malden Rushett (2 miles north), Oxshott (3 miles north-west), Barwell (3 miles north) and Stoke D'Abernon (4 miles west). Within a short drive, we also cover Guildford (12 miles west), Woking (12 miles west), Horley (11 miles south-east), Redhill (8 miles south-east), Ewell (4 miles north-east) and Egham (13 miles north-west).
Near you in Ashtead
In Ashtead, that means homes and buildings near Ashtead Park, Barnett Wood Infant School and St Andrew's Catholic School and the streets around them. The closest station to Ashtead is Ashtead station, roughly 0.6 miles north of the centre. Well-known places in the area include Headley Court (1.7 miles south-east) and Walton on the Hill (3.1 miles south-east). Open spaces near Ashtead include Box Hill and The Lake.
Do you need regrouting in Ashtead?
Poor ventilation keeps grout damp, giving mould a place to grow. Black marks that come back after cleaning are often in the grout itself.
The problems people generally mention when they call are:
- Floor grout that has worn and darkened
- Stained grout that cleaning won’t shift
- Discoloured grout on otherwise sound tiles
- Shower grout that has worn away
For site and facilities teams at buildings such as Parsons Mead School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
What to look for in a quote
- How hidden problems are handled
- Whether the sealant suits the joint
- How the joint is cleaned and prepared
- Is VAT in the price?
What affects the quote in Ashtead
Every job gets its own quote. These are the things that affect it:
- The old material and how stubborn it is
- How many areas need sealing
- When we can work, for business premises
- How much there is to do
The cost reflects the work involved, not guesswork. That is why we ask a few questions first and agree the price before starting.
Helping us quote
You don’t need to know the technical terms. It helps if you can tell us:
- Whether it’s a home or a business
- The address or postcode of the job
- Photos by email, if that is easy
- If someone has resealed it before
For a quick quote, get us on the phone, or email us if that’s easier. Describe what needs sealing and we’ll talk you through the work.
For landlords and businesses
Hotels need rooms back in use, so we plan the work room by room. Hotel work is part of what we do, alongside homes and businesses.
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together, and we’re fully insured.
Places near Ashtead
What else we do in Ashtead
Should I try it myself first?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.