Na h-Eileanan Siar · Scotland
Ardheisker Regrouting
Regrouting in Ardheisker from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Grout in corners that has cracked
- Stained grout that cleaning will not shift
- Grout that makes sound tiles look old
Regrouting in Ardheisker, done properly
Grout fills the gaps between tiles, while sealant goes where tiles meet a bath, tray or worktop. Once grout starts to crack or wash away, water can get in behind the tiles. We rake it out and replace it and renew the silicone at the edges. We’re often asked to deal with floor grout that won’t come clean and grout in a colour the owner wants to change, across kitchen splashbacks, bathroom floors and wet rooms.
Bathrooms in smaller places like Ardheisker work just as hard as those in the cities. Limescale is less of a problem with Scotland’s generally soft water, but mould still takes hold in damp sealant and grout.
Your job is guaranteed for a year, as with all our work.
- Place
- Ardheisker (HS6)
- Region
- Na h-Eileanan Siar
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Aftercare tips
Good habits help new joints last longer. A few tips:
- Look at the sealant in the corners now and then
- Don’t ignore a tile that feels loose
- Keep the fan on after showering
- Use a squeegee on the tiles after showering
A squeegee or cloth over the tiles after use stops soap and water sitting on the grout. Ventilate the room well to help it dry out.
Grout that’s washing out of a shower shouldn’t be left. Each shower drives water into the open joints, and that water can reach the wall or the floor below.
Nearby places to Ardheisker
Other services in Ardheisker
What we are called out for in Ardheisker
Hard water and soap leave a film on grout and stick to it. In time the grout under it darkens and breaks down, which is when replacing it makes sense.
Most people get in touch after spotting one of these:
- Kitchen splashback grout stained by grease
- Cracked or crumbling grout lines
- Old grout in a dated colour
- Corners filled with grout instead of silicone
For jobs in and around Ardheisker, choosing the right material for each joint is as important as a tidy finish.
What your quote should include
- How the joint is cleaned and prepared
- Whether they’re fully insured
- Whether VAT is included
- What happens if the job turns out different
Your questions about regrouting in Ardheisker
Will you come out to Ardheisker?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland, including the islands, where work is planned around ferry crossings. Let us know about access, parking and anything unusual about getting there when you book.
Is regrouting in Ardheisker guaranteed?
All our work, in Ardheisker and everywhere else, comes with a 12-month guarantee. We’re also fully insured and ARBOMaster approved.
Where are you based?
Our base is in Crawley, and we cover South East England, London and all of Scotland.
Are you insured?
Yes. We are fully insured.
Are you ARBOMaster approved?
Yes. We’re approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.
Can you do several jobs on one visit?
Yes. Just list everything you need and we will quote it together.
Do the sealants smell?
Sometimes, a little. It fades as the sealant cures, and ventilation helps.
Do you do commercial work?
Yes, regularly. Larger jobs can be planned room by room or area by area to suit the site.
Bathrooms and kitchens in Ardheisker
Ardheisker is within about 1 mile of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Work on the islands has to be planned around ferry crossings and the weather, so give us as much notice as you can.
In and around Ardheisker, as anywhere, good regrouting starts with a clean, dry, properly prepared joint.
Ardheisker is in Na h-Eileanan Siar. Whether you are in the middle of Ardheisker or further out, regrouting is available for homes and businesses alike. 87 places in Na h-Eileanan Siar are on our list, large and small.
Jobs for regrouting in HS6 works the same way as everywhere else we cover. Close by, we work in Claddach Kyles (1 mile east), Claddach Kirkibost (1 mile south-east), Locheport (5 miles south-east), Baile a' Mhanaich (7 miles south) and Balivanich (8 miles south). For island and remote addresses, a little more planning is needed.
Local landmarks in Ardheisker
Green spaces nearby include Loch Grogary and Balranald RSPB reserve.
Work for landlords, hotels and businesses
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
What happens on the day
Once we are on site, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. After that, the work takes a few hours for a shower enclosure, longer for a whole room. Outdoor work around Ardheisker depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Work indoors is not affected.
- First we agree what’s being done and flag any loose tiles.
- We remove the old grout carefully.
- The joints are cleaned out and vacuumed.
- The new grout goes in, then the tile faces are cleaned.
- Internal corners and edges are resealed.
Getting ready for the visit
- Try not to wet indoor joints just before the visit
- Clear the area around the work
- Let us know about stairs, lifts or work at height
Getting a quote
For regrouting in Ardheisker, send an email to info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.
Advice
How we quote for regrouting
We quote each job individually. These are the things that affect it:
- Working hours on commercial sites
- Whether old sealant or filler has to be cut out
- The size of the job
- Whether there’s mould to deal with
Leaving a failed joint generally makes the job bigger, not smaller. If you’re not sure whether it needs doing, drop us a line at info@mrmastic.co.uk and we’ll give you an honest view and a quote.
Helping us quote
There’s no need for technical detail. It helps if you can tell us:
- Roughly how big the job is
- Any access issues, like height or stairs
- Whether it has been sealed before
- The type of property
We quote each job on its own. Simply drop us a line at info@mrmastic.co.uk and describe the job, and photos are welcome.
When something else is needed
We won’t take on work that won’t last, so these are the limits:
- Loose tiles, which need refixing first
- Leaks from pipes, valves or wastes (a plumber’s job)
- A structure that flexes behind the tiles
If you are not sure, just send an email to info@mrmastic.co.uk and we will give you a straight answer before booking.
What we seal
- Tiled floors
- Bathroom floors
- Wet rooms
- Bathroom wall tiles
- Shower walls
- Kitchen splashbacks
Can I do it myself?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.