South Lanarkshire · Scotland
New-build mastic & snagging in Rigside, South Lanarkshire
Our applicators work in Rigside on plot mastic for developers and snagging failed sealant in new homes. Old material cut out, joints cleaned and sealed neatly and a one-year guarantee.
- Shower seals failing in the first year or two
- Skirting joints opening in the first winter
- Plot mastic for developers ahead of handover
Questions from Rigside
Do you cover Rigside for new build mastic?
Yes, Rigside is within the area we cover. Our work covers the whole of Scotland. Just send an email to info@mrmastic.co.uk with a few details of the job, and we will give you a clear price.
Do you cover smaller places like Rigside?
Yes. Rigside is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Is it worth resealing while the house is still settling?
It depends on whether water is getting through. A leaking shower or bath seal should be redone straight away, but cosmetic gaps can wait for movement to slow.
Will the old sealant be removed?
Always. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
Are you insured?
Yes. We’re fully insured.
Do you guarantee your work?
Yes. All our work carries our 12-month guarantee.
Do you take on second-fix sealing for builders?
Yes. Plot mastic and second-fix sealing for developers is part of our work. Send the schedule and any specification and we’ll give you a quote.
Can landlords and businesses book you?
Yes. As well as homeowners, we work for landlords, agents, businesses and hotels in Rigside.
New build mastic in Rigside
In a new home, every joint should have a clean, even bead. When the finish is smeared, patchy or already cracking, it’s worth putting right early, before water reaches anything behind it. Common call-outs are for second-fix sealing on new plots and messy sealant that spoils new finishes, across show homes, skirting & floors and bathrooms & en suites.
Many newer homes in Scotland are timber-framed and settle as they dry out, which shows as gaps at skirtings and floor joints. Older stone-built homes, meanwhile, often have timber floors that move with the seasons.
Whatever the size of the job, you get the same 12-month guarantee.
- Place
- Rigside (ML11)
- Wider area
- South Lanarkshire
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Places near Rigside
More services for Rigside
DIY versus a professional finish
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
Leave it or put it right?
Running a new bead over the builder’s sealant might look tidy for a few weeks, but it won’t bond to the old layer. A lasting seal starts with removing the old one completely. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water behind a failed seal does the most damage when nobody’s watching.
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
What you get with us
- An ARBOMaster approved applicator
- White, clear, grey or coloured to suit, where the product allows
- Trusted Arbo and Everbuild sealants
- Anti-fungal sanitary silicone in wet areas
What the job involves on each surface
Plot handovers
We work through plots to your schedule, sealing each room ready for handover. Joints are prepared properly before sealing.
Kitchens
New-kitchen sealant is often applied in a rush. We remove it and reseal with a kitchen-suitable sealant.
Do you need new build mastic in Rigside?
Sealant is often one of the last jobs before handover. Joints are not always cleaned of dust or primed, so the bead never bonds properly.
Common reasons people contact us include:
- Smeared, uneven beads picked up at snagging
- Joints pulling apart as timber shrinks
- New-build shower sealant that has already split
- Kitchen sealant that has pulled off the wall
Around Rigside, as everywhere, new build mastic is only as good as the preparation behind it.
Before you book anyone
- When the joint can take water or movement
- Whether they’re fully insured
- Which sealant they’ll use, and why
- Who does the work, and how experienced they are
What happens on the day
We bring everything the job needs with us, so there’s nothing for you to buy. After a quick look at the joints together, we protect the area and start. Most jobs take anything from a few hours to several days, depending on the number of plots. Somewhere like Rigside may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We look at why each joint failed, including any movement.
- We remove the failed sealant and clean the joints.
- Joints are dried and primed where the product calls for it.
- New sealant goes in, with baths filled first so they’re at their heaviest.
- The finished joints are checked and the cure times given.
Before we arrive
- Mention any parking rules near the property
- Move anything stored near the joints
- On commercial sites, let us know about site rules
Get a quote
We don’t publish a price list, because every job is different. Instead, your job gets its own clear quote. To get started, email us at info@mrmastic.co.uk.
Related advice
What affects the quote in Rigside
You will get a clear quote before we start. It’s based on:
- How much old sealant there is and how hard it is to remove
- How much there is to do
- The type of sealant required
- Working hours on commercial sites
We don’t show prices on the website, because each job is priced on what it involves. Call for a quick quote and we will talk you through it.
What to tell us for a quote
When you contact us, these details help:
- Any previous sealing or DIY work
- The problem you’ve noticed
- Access, such as stairs, a lift or height
- Pictures of the joints, sent by email
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is. Whenever you’re ready, email us at info@mrmastic.co.uk.
New homes and floors in Rigside
Timber frame is common in newer Scottish homes, so skirting and sealant joints can open up as the building settles.
Whether the job is in Rigside itself or nearby, the right material for each joint matters as much as a neat finish.
Rigside is about 10 miles south of Carluke, in South Lanarkshire. From the centre of Rigside to the outskirts, new build mastic is available for homes and businesses alike, from flats and houses to offices and hotels. We cover 139 towns and villages across South Lanarkshire. Glasgow is on our list too, around 26 miles away.
We cover every part of ML11 for new build mastic and the streets around it. Local streets include Douglasdale Street, Newtonhead Road and Broomfield Street, all of which we cover. Close by, we work in Douglas Water (1 mile north), Carmichael (3 miles north-east), Devonburn (4 miles north-west), Douglas (4 miles south-west) and Coalburn (4 miles west). Larger places within reach include Larkhall (12 miles north-west), Carluke (10 miles north), Lanark (5 miles north), Strathaven (12 miles north-west), Meikle Earnock (15 miles north-west) and Stonehouse (11 miles north-west).
Local landmarks in Rigside
A little further out are Castle Mains (1.9 miles south-west) and Douglas Heritage Museum (3.8 miles south-west).
Looking after it afterwards
Simple care keeps the joints in good condition. We recommend:
- Use the extractor fan every time you shower
- Resist patching a failed seal with a tube from the DIY shop
- Act quickly if a seal starts to leak
- Keep pictures and emails about snagging items
Keep pictures of the joints and any snagging correspondence with your builder. It helps if anything else comes up during the warranty period.
Report failed sealant to the builder while you are in the snagging period. Once it ends, the repair may be down to you.